Power Inductors <SMD Type: CDPH Series> Type: CDPH28D11F ◆ Product Description ・3.2×3.0mm Max.(L×W),1.2mm Max. Height. ・Inductance Range: 0.56～12μH. ・Rated current range:0.59～2.45A. ・Custom design is available. ◆ Feature ・Magnetically shielded construction. ・Ideally used as DC-DC Converter inductors in Mobile phone,PDA,MP3/MP4,DSC/DVC etc. ・Ideal for a variety of DC-DC converter inductor applications. (DVC, DSC, Cellular phone, PAD) ・Low Profile (H=1.2mm Max.) ・Low Rdc (Flat wire use) ・RoHS Compliance. ◆ Dimensions (mm) 1.2 Max. 1.0 2.0 3.2 Max. 3.0 Max. 3.6 1.8 ◆ Land Pattern (mm) 1.2 Please refer to the sales offices on our website for a representative near you www.sumida.com 1/2 Power Inductors <SMD Type: CDPH Series> Type: CDPH28D11F ◆ Specification Stamp Inductance (μH) 100kHz/1V D.C.R.(mΩ) Max.(Typ.) ( 20℃) Saturation Current Max.(Typ.) (A) ※1 Temperature Rise Current Max.(Typ.) (A) ※2 CDPH28D11FNP-R56N□ A 0.56±30% 41 (33) 2.45(3.27) 2.62(3.00) CDPH28D11FNP-1R2M□ B 1.2±20% 73 (58) 1.78(2.37) 1.83(2.08) CDPH28D11FNP-1R5M□ C 1.5±20% 86 (69) 1.59(2.12) 1.74(1.98) CDPH28D11FNP-2R2M□ D 2.2±20% 96 (77) 1.31(1.75) 1.72(1.94) CDPH28D11FNP-2R7M□ E 2.7±20% 116 (93) 1.22(1.63) 1.49(1.69) CDPH28D11FNP-3R3M□ F 3.3±20% 128 (102) 1.14(1.52) 1.42(1.58) CDPH28D11FNP-3R9M□ G 3.9±20% 144 (115) 1.03(1.37) 1.34(1.53) CDPH28D11FNP-4R7M□ H 4.7±20% 184 (147) 0.95(1.27) 1.18(1.32) CDPH28D11FNP-6R8M□ I 6.8±20% 300 (240) 0.83(1.10) 0.89(1.00) CDPH28D11FNP-100M□ J 10.0±20% 408 (326) 0.65(0.87) 0.76(0.86) CDPH28D11FNP-120M□ K 12.0±20% 453 (362) 0.59(0.79) 0.73(0.83) Part Name ※ ※ Description of part name CDPH28D11FNP-1R5M□ B Box C Carrier Tape ※1.Saturation current: The DC current at which the inductance decreases by 30% from its nominal value . (Ta＝20℃) ※2.Temperature rise current: The DC current at which the temperature rise is △t＝40℃ (Ta＝20℃) . Please refer to the sales offices on our website for a representative near you www.sumida.com 2/2