TOTAL POWER INT'L MAU300 Series 2 Watt Ultra Miniature High Isolation SIP DC/DC Converters Single & Dual with Output Key Features l SMT Technology l Miniture Package l I / O isolation 1000VDC l Efficiency Up To 83% l MTBF > 2,000,000 Hours l Low Cost +Vo +Vin LC Filter Bipolar Push-Pull Inverter -Vin -Vo +Vo +Vin LC Filter Bipolar Push-Pull Inverter Com. -Vin -Vo Mechanical Configuration Pin Connections 0.77 (19.5) 0.40 (10.2) 0.02 (0.5) 0.09 (2.3) 0.10 (2.54) 2 Single Output Dual Output 1 +Input +Input 2 -Input -Input 4 -Output -Output 5 No Pin Common 6 +Output +Output 0.126 (3.2) 0.02 (0.5) 0.01 (0.25) 1 Pin 4 5 6 0.05 (1.25) Physical Characteristics 0.30 (7.6) All dimensions typical in inches (mm). Tolerance= +/- 0.01 (+/- 0.25) Case Size 19.5*7.6*10.2 mm 0.77*0.30*0.40 inches Case Material Non-Conductive Black Plastic Weight 2.7g TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -1- TOTAL POWER INT'L MAU300 Absolute Maximum Ratings Exceeding these values can damage the module.These are not continuous operating ratings. Parameter Input Surge Voltage ( 1000 mS ) Min. Max. Unit. 5VDC Input Models -0.7 9 VDC 12VDC Input Models -0.7 18 VDC 24VDC Input Models -0.7 30 VDC --- 650 mW Internal Power Dissipation Environmental Specifications Parameter Conditions Min. Typ. Max. Unit Operating Temperature -25 --- +70 ] Storage Temperature -40 --- +125 ] --- --- 95 % Humidity Cooling Free-Air Convection Model Selection Guide Model Number Input voltage Output Voltage Output Current Output Current VDC VDC mA (Max.) mA (Min.) Input Current Max. Load mA (Typ.) Input Current No Load mA (Typ.) Load Regulation Efficiency % (Max.) % (Typ.) MAU301 3.3 500 10 452 11 73 MAU302 5 400 8 526 11 76 7 80 7 80 MAU303 12 165 3 495 15 133 2.5 499 MAU305 {5 {200 {4 519 10 77 MAU306 {12 {83 {1.5 504 7 79 MAU307 {15 {66 {1 501 7 79 MAU311 3.3 500 10 185 8 74 MAU312 5 400 8 212 8 78 5 82 5 83 MAU304 MAU313 5 (4.5 ~ 5.5) 60 12 165 3 200 15 133 2.5 200 MAU315 {5 {200 {4 210 8 79 MAU316 {12 {83 {1.5 201 5 82 MAU314 12 (10.8 ~ 13.2) 30 MAU317 {15 {66 {1 200 5 82 MAU321 3.3 500 10 92 8 74 MAU322 5 400 8 108 8 77 5 81 5 82 MAU323 12 165 3 101 15 133 2.5 101 MAU325 {5 {200 {4 105 8 79 MAU326 {12 {83 {1.5 102 5 81 MAU327 {15 {66 {1 100 5 82 MAU324 24 (21.6 ~ 26.4) 15 Specifications typical at Ta=+25],resistive load,nominal input voltage,rated output current unless otherwise noted. TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -2- TOTAL POWER INT'L MAU300 Input Specifications Parameter Input Voltage Range Model Min. Typ. Max. 5V Input Models 4.5 5 5.5 12V Input Models 10.8 12 13.2 24V Input Models 21.6 24 26.4 --- --- 0.3 A Reverse Polarity Input Current All Models Input Filter Unit VDC Pi Filter Output Specifications Parameter Conditions Output Voltage Accuracy Output Voltage Balance Min. Typ. Max. Unit --- {1.0 {3.0 % Dual Output Balance Load --- {0.1 {1.0 % Line Regulation For Vin Change 1% --- {1.2 {1.5 % Load Regulation Io=20% to 100% See Model Selection Guide Ripple & Noise (20MHz) Ripple & Noise (20MHz) Over Line,Load & Temp. Ripple & Noise (20MHz) % --- 100 150 mV P-P --- --- 200 mV P-P --- --- 5 mV rms. Over Load 120 --- --- % Temperature Coefficient --- {0.01 {0.02 %/] Output Short Circuit 0.5 Second Max. General Specification Parameter Rated Isolation Voltage Isolation Resistance Isolation Capacitance Conditions Min. Typ. Max. Unit 60 Seconds 1000 --- --- VDC 500VDC 1000 --- --- M[ 100KHz,1V --- 80 120 pF 50 80 100 kHz Switching Frequency Typical Applications + +Vin Fuse DC Power Source - +Out +Vin Fuse Single Output DC / DC Converter -Vin + Load DC Power Source -Out - Dual Output DC / DC Converter -Vin +Out Load #1 Common Load #2 -Out Input Fuse Selection Guide 5V Input Models 12V Input Models 24V Input Models 1000mA Slow - Blow Type 500mA Slow - Blow Type 200mA Slow - Blow Type TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -3- TOTAL POWER INT'L MAU300 Derating Curve Output Power % 100 100 80 80 60 60 40 40 -3% / OC 20 Output Power % 20 0 0 -25 -10 0 20 40 60 Ambient Temperature 80 100 125 O C Connecting Pin Patterns (2.54 mm / 0.1 inch grids ) Single Output Dual Output NOTE: 1. Specifications typical at Ta=+25],resistive load,nominal input voltage,rated output current unless otherwise noted. 2. Other input and output voltage may be available,Please contact factory. 3. Specifications subject to change without notice. TOTAL POWER INT'L Tel: 877-646-0900 Fax: 978-453-7395 Email: [email protected] http://www.total-power.com -4-