DIGITRON SEMICONDUCTORS MAC37 SERIES MAC38 SERIES SILICON BIDIRECTIONAL THYRISTORS Available Non-RoHS (standard) or RoHS compliant (add PBF suffix). Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. MAXIMUM RATINGS Rating Symbol Peak repetitive off-state voltage (TJ = 110°C) MAC37-1,MAC38-1 MAC37-2,MAC38-2 MAC37-3,MAC38-3 MAC37-4,MAC38-4 MAC37-5,MAC38-5 MAC37-6,MAC38-6 MAC37-7,MAC38-7 Value Unit (1) 25 50 100 200 300 400 500 VDRM RMS on-state current IT(RMS) Volts 25 Amps Peak non-repetitive surge current (1 cycle, 60Hz, TJ = -40 to + 110°C) ITSM Circuit fusing considerations (TJ = -40 to + 110°C, t = 8.3ms) I2t 210 A2s PGM 5.0 Watts PG(AV) 0.5 Watts Peak gate power (2) Average gate power Peak gate current Amps 225 (2) IGM 2 Amps Operating junction temperature range TJ -40 to +110 °C Tstg -40 to +150 °C 30 In. lb. Storage temperature range Mounting torque Note 1: For either direction of blocking voltage. VDRM for all types can be applied on a continuous dc basis without incurring damage. Ratings apply for open gate conditions. Thyristor devices shall not be tested with a constant current source for blocking capability such that the voltage applied exceeds the rated blocking voltage. Note 2: TJ = 110°C, 1 second maximum duration: 5.0% duty cycle, ITM = 10A. THERMAL CHARACTERISTICS Characteristic Thermal resistance, junction to case Symbol Maximum Unit RӨJC 1.0 °C/W ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted) Characteristic Symbol Peak blocking current (either direction) (VD = Rated VDRM, TJ = 110°C) IDRM Peak on-state voltage (either direction) (ITM = 35A peak) VTM Gate trigger current (continuous dc) (3) (VD = 7V, RL = 47Ω) MT2(+),G(+); MT2(-),G(-) IGT Gate trigger voltage (continuous dc) (3) (VD = 7V, RL = 47Ω) MT2(+),G(+); MT2(-),G(-) VGT Gate trigger voltage (continuous dc) (3) (VD = Rated VDRM, RL = 100Ω, TJ = 110°C) MT2(+),G(+); MT2(-),G(-) VGD Holding current (either direction) (VD = 7V, ITM = 150mA, gate open) IH Gate controlled turn-on time (ITM = 25A, IGT = 200mA) ton 144 Market Street Kenilworth NJ 07033 USA phone +1.908.245-7200 fax +1.908.245-0555 Min Typ. Max - - 2.0 - 1.4 1.9 - 20 75 - 1.0 3.0 0.2 - - - 10 75 - 1.0 - Unit mA Volts mA Volts Volts [email protected] www.digitroncorp.com Rev. 20130207 mA µs DIGITRON SEMICONDUCTORS MAC37 SERIES MAC38 SERIES SILICON BIDIRECTIONAL THYRISTORS Characteristic Symbol Critical forward voltage application rate (@ VDRM, TJ = 110°C, gate open) Min Typ. Max - 100 - dv/dt Note 3: All voltage polarity reference to Main Terminal 1. MECHANICAL CHARACTERISTIC Case Digi PF2 (MAC37 Series) Marking Alpha-numeric Polarity Cathode is stud DIGI PF2 A B C E F J K N Q Inches Min Max 0.501 0.505 0.465 0.475 0.330 0.380 0.100 0.035 0.085 0.080 0.097 0.800 0.510 0.065 0.160 Millimeters Min Max 12.730 12.830 11.810 12.060 8.390 9.650 2.540 0.890 2.160 2.040 2.460 20.320 12.950 1.650 4.060 MECHANICAL CHARACTERISTIC Case TO-48 (MAC38 Series) Marking Alpha-numeric Polarity Cathode is stud TO-48 A B C F H J K L Q T 144 Market Street Kenilworth NJ 07033 USA phone +1.908.245-7200 fax +1.908.245-0555 Inches Min Max 0.604 0.614 0.551 0.559 1.050 1.190 0.135 0.160 0.265 0.420 0.455 0.620 0.670 0.300 0.350 0.055 0.085 0.501 0.505 Millimeters Min Max 15.340 15.600 14.000 14.200 2.670 30.230 3.430 4.060 6.730 10.670 11.560 15.750 17.020 7.620 8.890 1.400 2.160 12.730 12.830 [email protected] www.digitroncorp.com Rev. 20130207 Unit V/µs DIGITRON SEMICONDUCTORS MAC37 SERIES MAC38 SERIES 144 Market Street Kenilworth NJ 07033 USA SILICON BIDIRECTIONAL THYRISTORS phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20130207 DIGITRON SEMICONDUCTORS MAC37 SERIES MAC38 SERIES 144 Market Street Kenilworth NJ 07033 USA SILICON BIDIRECTIONAL THYRISTORS phone +1.908.245-7200 fax +1.908.245-0555 [email protected] www.digitroncorp.com Rev. 20130207