140 CRH Vishay BCcomponents Aluminum Capacitors SMD (Chip), High Temperature FEATURES • Polarized aluminum electrolytic capacitors, non-solid electrolyte, self healing Fig.1 Component outline 140 CRH 125 °C 175 °C solid SMD 175 TMP Lower temp. 150 CRZ 153 CRV QUICK REFERENCE DATA DESCRIPTION Nominal case sizes (L x W x H in mm) Rated capacitance range, CR Tolerance on CR Rated voltage range, UR Category temperature range Endurance test at 125 °C: case size ≤ 10 x 10 x 14 case size ≥ 12.5 x 12.5 x 13 Useful life at 125 °C: case size ≤ 10 x 10 x 14 case size ≥ 12.5 x 12.5 x 13 Useful life at 40 °C; 1.8 x lR applied: case size ≤ 10 x 10 x 14 case size ≥ 12.5 x 12.5 x 13 Shelf life at 0 V, 125 °C Based on sectional specification Climatic category IEC 60068 VALUE 8 x 8 x 10 to 12.5 x 12.5 x 16 10 to 1000 µF ± 20 % 6.3 to 63 V - 55 to + 125 °C 1000 hours 2000 hours 1500 hours 3000 hours • SMD-version with base plate, lead (Pb)-free RoHS reflow solderable COMPLIANT • High temperature, 3000 h at 125 °C • High capacitance values • Very long useful life: 5000 h at 105 °C for case size ≥ 12.5 x 12.5 x 13 • Standard 4 pin-version for diameter ≥ 12.5 mm • 4 pin-version for diameter 10 mm on request • Charge and discharge proof, no peak current limitation • Lead (Pb)-free and RoHS compliant • ATTENTION: for maximum safe soldering conditions refer to Fig. 4 APPLICATIONS • SMD technology, for high mounting density • Industrial and professional applications • Automotive, general industrial • Smoothing, filtering, buffering • 4 pin-version for high vibration MARKING • • • • Rated capacitance (in µF) Rated voltage (in V) Date code, in accordance with IEC 60062 Black mark or ‘-’ sign indicating the cathode (the anode is identified by bevelled edges) • Code indicating group number (H) 150 000 hours 300 000 hours 1000 hours IEC 60384-18/CECC32300 55/125/56 PACKAGING Supplied in blister tape on reel SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (L x W x H in mm) UR (V) CR (µF) 10 22 33 47 68 100 150 220 330 470 680 1000 6.3 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 - www.vishay.com 66 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 16 8 x 8 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 - 25 35 50 8 x 8 x 10 10 x 10 x 10 12.5 x 12.5 x 13 12.5 x 12.5 x 16 - 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 13 12.5 x 12.5 x 16 - 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 - For technical questions, contact: [email protected] 63 8 x 8 x 10 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 - Document Number: 28396 Revision: 24-Oct-08 140 CRH Aluminum Capacitors SMD (Chip), High Temperature 0.3max 25V 2200u L4-H 25V 2200u L4-H D W 0.3max D W B L1 Hmax min. 0.4/max. 1.0 (2 x) ≥ 12.5 x 12.5 x 13 mm 4-pin: Hmax min. 0.4/max. 1.0 (2 x) ≤ 10 x 10 x 14 mm 2-pin: Vishay BCcomponents B L S L1 R L S T Fig.2 Dimensional outline Table 1 DIMENSIONS in millimeters AND MASS NOMINAL CASE SIZE LxWxH 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 CASE CODE Lmax. Wmax. Hmax. ØD Bmax. S L1max. R ± 0.1 T ± 0.1 MASS (g) 0810 1010 1014 1213 1216 8.5 10.5 10.5 12.8 12.8 8.5 10.5 10.5 12.8 12.8 10.5 10.5 14.3 14.0 16.5 8.0 10.0 10.0 12.5 12.5 1.0 1.0 1.0 1.3 1.3 2.2 3.5 3.5 3.6 3.6 9.9 11.8 11.8 14.9 14.9 3.7 3.7 2.4 2.4 ≈ 1.0 ≈ 1.3 ≈ 1.5 ≈ 2.6 ≈ 2.8 Table 2 TAPE AND REEL DIMENSIONS in millimeters, PACKAGING QUANTITIES NOMINAL CASE SIZE LxWxH CASE CODE PITCH P1 TAPE WIDTH W TAPE THICKNESS T2 REEL DIAMETER PACKAGING QUANTITY PER REEL 8 x 8 x 10 0810 16 24 11.3 380 500 10 x 10 x 10 1010 16 24 11.3 380 500 10 x 10 x 14 1014 16 24 14.8 330 250 12.5 x 12.5 x 13 1213 20 24 15.5 380 250 12.5 x 12.5 x 16 1216 24 32 17.5 380 200 Note Detailed tape dimensions see section ‘PACKAGING’. MOUNTING SOLDERING The capacitors are designed for automatic placement on to printed-circuit boards. Optimum dimensions of soldering pads depend amongst others on soldering method, mounting accuracy, print layout and/or adjacent components. For recommended soldering pad dimensions, refer to Fig.3 and Table 3. Soldering conditions are defined by the curve, temperature versus time, where the temperature is that measured on the component during processing. For maximum conditions refer to Fig.4. Any temperature versus time curve which does not exceed the specified maximum curves may be applied. Document Number: 28396 Revision: 24-Oct-08 AS A GENERAL PRINCIPLE, TEMPERATURE AND DURATION SHALL BE THE MINIMUM NECESSARY REQUIRED TO ENSURE GOOD SOLDERING CONNECTIONS. HOWEVER, THE SPECIFIED MAXIMUM CURVES SHOULD NEVER BE EXCEEDED. For technical questions, contact: [email protected] www.vishay.com 67 140 CRH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents e d f b b d a c a a Case size Ø D ≤ 10 mm c a Case size Ø D ≥ 12.5 mm Fig.3 Recommended soldering pad dimensions Table 3 RECOMMENDED SOLDERING PAD DIMENSIONS in millimeters CASE CODE a b c d e f 0810 1010 1014 1213 1216 3.5 4.3 4.3 5.5 5.5 2.5 2.5 2.5 2.5 2.5 3.0 4.0 4.0 4.0 4.0 4.2 4.2 5.0 5.0 5.6 5.6 T (°C) TPeak 230 217 t4 t3 200 150 t2 t1 time (s) Fig.4 Maximum temperature load during reflow soldering Table 4 REFLOW SOLDERING CONDITIONS PROFILE FEATURES CASE CODE 0810 to 1014 CASE CODE 1213 to 1216 200 s Max. time from 25 °C to TPeak 240 s Max. ramp-up rate to 150 °C 3 K/s 3 K/s Max. time from 150 °C to 200 °C, (t1) 150 s 120 s 0.5 K/s to 3 K/s 0.5 K/s to 3 K/s Ramp up rate from 200 °C to TPeak Max. time from 200 °C to 217 °C, (t2) 60 s 60 s Max. time above TLiquidus (217 °C) (t3) 90 s 60 s Max. time above 230 °C (t4) Peak temperature TPeak 40 s 30 s 250 °C 240 °C Max. time above TPeak minus 5 °C 5s 10 s Max. ramp-down rate from TLiquidus 6 K/s 6 K/s Note Temperature measuring point on top of the case and terminals max. 2 runs with pause of min. 30 min in between www.vishay.com 68 For technical questions, contact: [email protected] Document Number: 28396 Revision: 24-Oct-08 140 CRH Aluminum Capacitors SMD (Chip), High Temperature ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Vishay BCcomponents Electrolytic capacitor 140 CRH series DESCRIPTION CR rated capacitance at 100 Hz, tolerance ± 20 % 100 µF/50 V; ± 20 % IR rated RMS ripple current at 100 kHz, 125 °C Nominal case size: 10 x 10 x 14 mm; taped on reel IL2 max. leakage current after 2 minutes at UR tan δ max. dissipation factor at 100 Hz Z max. impedance at 100 kHz Ordering Code: MAL214097102E3 Former 12NC: 2222 140 97102 Note Unless otherwise specified, all electrical values in Table 4 apply at Tamb = 20 °C, P = 86 to 106 kPa, RH = 45 to 75 % Table 5 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 6.3 10 16 25 35 50 63 CR (µF) 330 470 680 220 330 470 680 1000 150 330 470 680 100 220 330 470 68 100 150 220 330 470 47 68 100 220 330 10 22 33 47 68 100 220 Document Number: 28396 Revision: 24-Oct-08 NOMINAL CASE SIZE LxWxH (mm) 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x13 12.5 x 12.5 x 16 8 x 8 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 8 x 8 x 10 10 x 10 x 10 12.5 x 12.5 x 13 12.5 x 12.5 x 16 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 13 12.5 x 12.5 x 16 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 8 x 8 x 10 8 x 8 x 10 8 x 8 x 10 10 x 10 x 10 10 x 10 x 14 12.5 x 12.5 x 13 12.5 x 12.5 x 16 IR 100 kHz 125 °C (mA) 180 300 430 180 300 430 750 900 180 430 750 900 180 300 750 900 180 255 317 750 750 900 145 205 255 750 900 145 145 145 205 255 500 600 tan δ 100 Hz Z 100 kHz 20 °C (Ω) ORDERING CODE MAL2140....... 21 30 43 22 33 47 68 100 24 53 75 108 25 55 82 117 24 35 0.30 0.30 0.30 0.26 0.26 0.26 0.22 0.22 0.22 0.22 0.18 0.18 0.18 0.18 0.16 0.16 0.14 0.14 0.40 0.25 0.12 0.40 0.25 0.12 0.12 0.09 0.40 0.20 0.12 0.09 0.40 0.25 0.12 0.09 0.40 0.25 97303E3 97301E3 97302E3 97403E3 97401E3 97402E3 97411E3 97412E3 97502E3 97501E3 97511E3 97512E3 97602E3 97601E3 97611E3 97612E3 97003E3 97001E3 53 77 115 164 24 34 50 110 165 6.3 14 21 30 43 63 138 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.20 0.12 0.12 0.09 0.70 0.50 0.40 0.23 0.18 0.70 0.70 0.70 0.50 0.40 0.25 0.20 97002E3 97011E3 97012E3 97013E3 97103E3 97101E3 97102E3 97111E3 97112E3 97805E3 97803E3 97804E3 97801E3 97802E3 97811E3 97812E3 IL2 2 min (µA) For technical questions, contact: [email protected] www.vishay.com 69 140 CRH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE Voltage Surge voltage for short periods IEC 60384-18, subclause 4.14 Us ≤ 1.15 x UR Reverse voltage for short periods IEC 60384-18, subclause 4.16 Urev ≤ 1 V After 2 minutes at UR IL2 ≤ 0.0 x CR x UR Ø D = 8 mm typ. 6 nH Ø D = 10 mm typ. 8 nH Ø D ≥ 12.5 mm typ. 11 nH Calculated from tan δmax. and CR (see Table 4) ESR = tan δ/2 π f CR Current Leakage current Inductance Equivalent series inductance (ESL) Resistance Equivalent series resistance (ESR) at 100 Hz DISSIPATION FACTOR (tan δ) CAPACITANCE (C) 1.2 10 C C0 1 1.1 Tan Tan0 2 1 1.0 0.9 2 1 Curve 1: 10 V Curve 2: 63 V 0.1 0.8 - 60 - 40 - 20 0 20 40 C0 = capacitance at 20 °C, 100 Hz Fig.5 60 80 100 120 Tamb (°C) Typical multiplier of capacitance as function of ambient temperature www.vishay.com 70 - 60 - 40 - 20 0 20 tan δ0 = typical tan δ at 20 °C, 100 Hz Fig.6 40 60 80 100 120 140 Tamb (°C) Multiplier of dissipation factor (tan δ) as function of ambient temperature For technical questions, contact: [email protected] Document Number: 28396 Revision: 24-Oct-08 140 CRH Aluminum Capacitors SMD (Chip), High Temperature IMPEDANCE (ESR) EQUIVALENT SERIES RESISTANCE (ESR) 10 10 2 Curve 1: 100-25-0810 Curve 2: 220-25-1010 Curve 3: 330-25-1213 Curve 4: 470-25-1216 Z (Ω) Curve 1: Ø = 8 mm, 10 mm Curve 2: Ø = 12.5 mm ESR ESR0 Vishay BCcomponents 10 1 1 1 2 3 4 2 0.1 1 0.01 0.1 10 10 2 10 3 10 4 ESR0 = typical ESR at 20 °C, 100 Hz Fig.7 10 10 10 3 Curve 1: 68-35-0810 Curve 2: 100-35-1010 Curve 3: 150-35-1014 Curve 4: 330-35-1213 Curve 5: 470-35-1216 2 10 Fig.8 Typical multiplier of ESR as function of frequency Z (Ω ) 10 f (Hz) 10 Tamb 20 °C 5 2 10 3 10 f (Hz) 10 Tamb 20 °C 5 Typical impedance as function of frequency 3 Curve 1: 33-63-0810 Curve 2: 47-63-1010 Curve 3: 68-63-1014 Curve 4: 100-63-1213 Curve 4: 220-63-1216 Z (Ω ) 10 4 2 1 10 10 1 2 3 4 5 1 10 - 1 10 - 1 10 10 Fig.9 2 10 3 10 4 f (Hz) 10 Tamb 20 °C Typical impedance as function of frequency Document Number: 28396 Revision: 24-Oct-08 2 3 4 5 5 1 10 10 Fig.10 2 10 3 10 4 f (Hz) 10 Tamb 20 °C 5 Typical impedance as function of frequency For technical questions, contact: [email protected] www.vishay.com 71 140 CRH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE MBC242 I A 4.3 IR 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.1 3.0 lifetime multiplier 2.8 0 1. 5 1. 2.6 0 2. 0 3. 2.4 0 4. 0 8. 0 2.0 12 IR = rated ripple current at 100 kHz, 125 °C 1.8 30 1.6 60 0 10 1.4 1.2 1.0 0.8 0.5 0.0 (1) 0 20 Useful life at 125 °C and IR applied: case code ≤ 1014: 1500 h case code ≥ 1014: 3000 h 20 (1) 6. 2.2 IA = actual ripple current at 100 kHz 0 40 40 50 60 70 80 90 100 110 120 130 Tamb (°C) Fig.11 Multiplier of useful life as a function of ambient temperature and ripple current load Table 6 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) UR = 6.3 to 25 V UR = 35 and 50 V UR = 63 V 50 0.60 0.45 0.40 100 0.70 0.60 0.55 300 0.80 0.75 0.70 1000 0.85 0.85 0.85 3000 0.90 0.90 0.90 10 000 0.95 0.95 0.95 30 000 0.97 0.97 0.97 100 000 1.00 1.00 1.00 www.vishay.com 72 For technical questions, contact: [email protected] Document Number: 28396 Revision: 24-Oct-08 140 CRH Aluminum Capacitors SMD (Chip), High Temperature Vishay BCcomponents Table 7 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS Mounting IEC 60384-18, subclause 4.3 shall be performed prior to tests mentioned below; reflow soldering; for maximum temperature load refer to chapter “Mounting” ΔC/C: ± 5 % tan δ ≤ spec. limit IL2 ≤ spec. limit Endurance IEC 60384-18/ CECC 32 300, subclause 4.15 Tamb = 125 °C; UR applied; case size ≤ 10 x 10 x 14: 1000 h case size ≥ 12.5 x 12.5 x 13: 2000 h UR = 6.3 V; ΔC/C: ± 25 % UR ≥ 10 V; ΔC/C: ± 20 % tan δ ≤ 2 x spec. limit IL2 ≤ spec. limit Useful life CECC 30301, subclause 1.8.1 Tamb = 125 °C; UR and IR applied; case size ≤ 10 x 10 x 14: 1500 h case size ≥ 12.5 x 12.5 x 13: 3000 h ΔC/C: ± 50 % tan δ ≤ 3 x spec. limit IL2 ≤ spec. limit no short or open circuit’ total failure percentage: ≤ 1 % Shelf life (storage at high temperature) IEC 60384-18/ CECC 32 300, subclause 4.17 Tamb = 125 °C; no voltage applied; 1000 h after test: UR to be applied for 30 min, 24 to 48 h before measurement for requirements see ‘Endurance test’ above Reverse voltage IEC 60384-18/ CECC 32 300, subclause 4.16 Tamb = 125 °C: 125 h at U = - 0.5 V, followed by 125 h at UR ΔC/C: ± 15 % tan δ ≤ 1.5 x spec. limit IL2 ≤ spec. limit Document Number: 28396 Revision: 24-Oct-08 For technical questions, contact: [email protected] www.vishay.com 73 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1