DC COMPONENTS CO., LTD. R RECTIFIER SPECIALISTS BR05DF THRU BR05JF TECHNICAL SPECIFICATIONS OF FAST RECOVERY SINGLE-PHASE SURFACE MOUNT BRIDGE RECTIFIER VOLTAGE RANGE - 200 to 600 Volts CURRENT - 0.5 / 0.8 Ampere FEATURES * * * * * * Ideal for automated placement Low profile space Low forward voltage grop Low leakage current High forward surge capability Glass passivated junction MBF .106(2.70) .090(2.30) MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Terminals: MIL-STD-202E, Method 208 guaranteed Polarity: Symbols molded or marked on body Mounting position: Any Weight: 0.12 gram .276(7.00) .260(6.60) .043(1.10) .020(0.50) .236(6.00) .220(5.60) .004(0.10) Max. .016(0.41) .006(0.15) .035(0.90) .020(0.50) .197(5.00) .181(4.60) .063(1.60) .047(1.20) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL BR05DF BR05GF BR05JF UNITS Maximum Recurrent Peak Reverse Voltage VRRM 200 400 600 Volts Maximum RMS Bridge Input Voltage VRMS 140 280 420 Volts Maximum DC Blocking Voltage VDC 200 400 600 o Maximum Average Forward Output Current at T A = 30 C (Note 2 / 3) Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) 0.5 / 0.8 Amps I FSM 30 Amps VF 1.25 Volts Maximum DC Forward Voltage Drop per Bridge Element at 0.4A DC o Maximum Reverse Current at rated @T A = 25 C DC Blocking Voltage per element @T A = 125 o C Typical Junction Capacitance ( Note1) Typical Thermal Resistance (Note 2 / 3) Operating and Storage Temperature Range 5.0 IR µAmps 100 Maximum reverse recovery time at IF = 0.5A , IR = 1.0A , Irr = 0.25A Volts IO trr 150 250 CJ 13 RθJ A 85 / 70 T J, T STG -50 to + 150 NOTES : 1. Measured at 1 MHZ and applied reverse voltage of 4.0 volts. 2. On glass epoxy P.C.B. with 0.05 x 0.05" (1.3x1.3mm) copper pads. 3. On aluminum substrate P.C.B. with an area of 0.8 x 0.8 “ (20x20mm) mounted on 0.05 x 0.05" (1.3x1.3mm) copper pads. nS pF 0 C/W 0 C RATING AND CHARACTERISTIC CURVES (BR05DF THRU BR05JF) FIG. 1 - DERATING CURVE FOR OUTPUT CURRENT PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) 1.0 Aluminium Substrate 0.8 0.6 Glass Epoxy P.C.B. 0.4 0.2 Resistive or Inductive Lode 0 0 30 60 90 FIG. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 120 35 8.3ms Single Half Sine-Wave JEDEC Method 30 25 20 15 10 0 150 1 10 AMBIENT TEMPERATURE, (oC) NUMBER OF CYCLES AT 60 Hz 10 1.0 TJ = 25OC 0.1 Pulse Width = 300 µS 1% Duty Cycle 0.01 .2 .4 .6 .8 1.0 1.2 INSTANTANEOUS FORWARD VOLTAGE, (V) FIG. 4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS TJ = 125OC 100 TJ= 125oC 10 1.0 TJ= 75oC .01 TJ= 25oC 0.01 10 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) DC COMPONENTS CO., LTD. R 100 140