DIOTEC ELECTRONICS CORP Data Sheet No. GP60PF-1A 18020 Hobart Blvd., Unit B Gardena, CA 90248 U.S.A Tel.: (310) 767-1052 Fax: (310) 767-7958 60 AMP PRESS FIT HIGH VOLTAGE DIODES (GPP DIE) FEATURES MECHANICAL SPECIFICATION VOID FREE VACUUM DIE SOLDERING For Maximum Mechanical Strength And Heat Dissipation (Solder Voids: Typical < 2%, Max. < 5% of Die Area) _ 0.002” 0.052” + Full Silicon Die Area on P- and N-Sides Are Soldered to Copper Slugs For Minimum Stress And Maximum Heat Dissipation 1.00” Min Very Low Resistivity Silicon Die For Lower Operating Junction Temperature Very Low Reverse Current Leakage For Minimum Energy Loss MECHANICAL DATA 0.401” 0.385” 0.194” 0.184” Press Fit Into Heat Sink to Further Enhance Heat Handling Capability 0.173” 0.157” 0.505”/502” OVER KNURL 0.012” 0.008” GLASS PASSIVATED HEX DIE DT GP6004A 0452 0.216" Flat to Flat Case: Nickel plated copper ALL DIMENSIONS IN INCHES Finish: All external surfaces are corrosion resistant and the contact areas are readily weldable or solderable o Maximum Soldering Temperature: 250 C, 0.25" from case for 10 Seconds Mounting Position: Any. Maximum force used for diode insertion to be 12 KN NT 70 Typ. 0.007” 0.005” S RoH 78 Places Equally Spaced LIA MP O C Polarity: Color coded epoxy ring- ANODE on LEAD (Beige Ring): Part No.=GP6002PFA/GP6004PFA. CATHODE on LEAD (Black Ring) Part No.=GP6002PFC/GP6004PFC. Part No. marked on cap base. MAXIMUM RATINGS & ELECTRICAL CHARACTERISTICS Ratings at 25 °C ambient temperature unless otherwise specified. PARAMETER (TEST CONDITIONS) Series Number Maximum Recurrent Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Non-Repetitive Peak Reverse Voltage (Half Wave, 60 Hz, Single Phase) Average Forward Rectified Current Non-repetitive Peak Forward Surge Current (Half wave, single phase, 60 Hz sine applied to rated load) @ 60Amp DC (Typical) Forward VoltageDrop @ 100Amp DC (Typical) Maximum DC Reverse Current at Rated Blocking Voltage Tc = 25 OC) Junction Operating & Storage Temperature Range RATINGS SYMBOL VRRM VRWM VDC VRSM IO IFSM IR TJ,TSTG UNITS GP6002PFA GP6002PFC GP6004PFA GP6004PFC 200 400 240 60 800 <1.05 <1.15 <1.0 -65 to +200 480 60 800 <1.05 <1.15 <1.0 -65 to +200 VOLTS AMPS VOLTS mA °C