ACDC 1580 Watts AEL Series xppower.com • Energy Efficiency Level V • CEC 2008 and EISA 2007 Compliant • Limited Power Source Approval • China Compulsory Certification (CCC) Qualified • +60 °C Operating Temperature • Compact Dimensions • 3 Year Warranty Specification Input • 90-264 VAC • 47-63 Hz • AEL15/20: 0.4 A max at 115 VAC AEL40: 1.0 A max at 115 VAC AEL60: 1.6 A max at 115 VAC AEL80: 1.1 A max at 115 VAC Inrush Current • AEL15/20: 15/30 A max for 115/230 VAC, AEL40: 25/50 A max for 115/230 VAC, AEL60: 35/70 A max for 115/230 VAC, AEL80: 45/92 A max for 115/230 VAC, cold start at 25 °C Earth Leakage Current • 0.75 mA at 240 VAC Power Factor • EN61000-3-2, Class A Input Protection • Internal fuse in line, AEL15/20: T1 A, 250 V AEL40: T2 A, 250 V AEL60/80: T3.15 A, 250 V No Load Input Power • 0.5 W maximum, model dependent Input Voltage Input Frequency Input Current Output • See tables • No minimum load required • AEL15: 5 ms min, AEL20/40: 12 ms min, AEL60/80: 16 ms min, at full load 110 VAC Start Up Delay • AEL20/40: 0.5 s, AEL15/60/80: 2.0 s max at full load 100 VAC Transient Response • 2% max deviation, recovery to within 1% of nominal in 500 µs for 50% load change Line Regulation • See tables Load Regulation • See tables Ripple & Noise • 1% pk-pk, 20 MHz bandwidth Overvoltage Protection • 112-132% (AEL40/60/80 only) Overload Protection • 110-150% (AEL20/40/60/80 only) Short Circuit Protection • Trip & restart (hiccup mode), auto recovery Temperature • ±0.04%/°C Coefficient Output Voltage Minimum Load Hold Up Time General Efficiency Energy Efficiency Isolation Switching Frequency MTBF • See tables • Model dependent, see tables • 3000 VAC Input to Output 1500 VAC Input to Ground* 500 VDC Output to Ground* *Not C8 version All class I models available with output negative connected to ground. See notes. • 63 kHz typical • >100 kHrs to MIL-HDBK-217F at 25 °C, GB Environmental Operating Temperature • -20 °C to +60 °C, derate linearly from 100% power at +40 °C to 50% power at +60 °C Storage Temperature • -40 °C to +85 °C Cooling • Convection cooled Operating Humidity • 5-95% RH, non-condensing Operating Altitude • 2000 m Shock • 10 g, 10 ms on 3 axes EMC & Safety Emissions Harmonic Current Voltage Flicker ESD Immunity • • • • Radiated Immunity EFT/Burst Surge • • • Conducted Immunity Magnetic Field Dips & Interruptions • • • Safety Approvals • EN55022 level B conducted & radiated EN61000-3-2 class A EN61000-3-3 EN61000-4-2 Level 2 (contact) Perf Criteria A EN61000-4-2 Level 3 (air) Perf Criteria A EN61000-4-3, 3 V/m, Perf criteria A EN61000-4-4, level 2, Perf criteria A EN61000-4-5, installation class 3, Perf criteria A EN61000-4-6, level 2, Perf criteria A EN61000-4-8, 1 A/m, Perf criteria A EN61000-4-11, 30% 10 ms, 60% 100 ms, 100% 5000 ms Perf Criteria A, B, B EN60950-1: UL/cUL60950-1, Approved as Limited Power Source (AEL15-60 only), China Compulsory Certification (CCC) qualified. Output Power Output Voltage (3) Output Current Total Regulation(2) Efficiency(5) Model Number(1,6) 8W 3.3 VDC 2.50 A 7% 68% AEL15US03(4) 12 W 5.0 VDC 2.40 A 7% 78% AEL15US05 8.0 VDC 1.87 A 5% 79% AEL15US08 9.0 VDC 1.66 A 5% 79% AEL15US09 12.0 VDC 1.25 A 5% 80% AEL15US12 15.0 VDC 1.00 A 5% 81% AEL15US15 18.0 VDC 0.83 A 5% 82% AEL15US18 24.0 VDC 0.62 A 5% 78% AEL15US24(4) 30.0 VDC 0.50 A 5% 77% AEL15US30(4) 36.0 VDC 0.42 A 3% 75% AEL15US36(4) 48.0 VDC 0.31 A 3% 81% AEL15US48 15 W Notes 1. 2. 3. 4. 5. 6. Standard input connector is IEC320-C14 Inlet. For optional IEC320-C6 Inlet, add suffix “C6” to model number e.g. AEL15US12C6. Total regulation includes line regulation and load regulation. Other output voltages available, contact sales for details. Energy Efficiency Level IV. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load. For output negative connected to ground add suffix G. Mechanical Details 1.42 (36.0) 1.50 (38.0) 3.58 (91.0) AC INPUT IEC-320-C6 INLET AC INPUT IEC-320-C14 INLET Notes 1. 2. 3. 4. 5. 6. 7. 8. All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max. Output connector: is 0.22 (5.5) outer diameter barrel, 0.10 (2.5) inner diameter barrel with centre positive (+) and outer shell negative (-). Length is 0.433 (11.0). Output cable length is 48” (1220mm) approx. Weight: 0.36 lbs (165 g) For European mains lead order part: EU-MAINS-IEC or EU-MAINS-5 for C6 version. For UK mains lead order part: UK-MAINS-IEC or UK-MAINS-5 for C6 version. For US mains lead order part: US-MAINS-IEC or US-MAINS-5 for C6 version. Mains lead length is 78“ (2000 mm) approx ACDC AEL15 Models and Ratings Output Power Output Voltage(3) 15 W 20 W Output Current Total Regulation(2) Efficiency(4) Model Number(1,5) 5 VDC 3.00 A 5% 79% AEL20US05 12 VDC 1.67 A 4% 86% AEL20US12 15 VDC 1.33 A 4% 85% AEL20US15 24 VDC 0.83 A 3% 87% AEL20US24 30 VDC 0.67 A 3% 86% AEL20US30 48 VDC 0.42 A 3% 87% AEL20US48 Notes 1. 2. 3. 4. 5. For optional class II version on AEL20 models only, add suffix ‘C2’ to model number e.g. AEL20US12C2. Total regulation includes line regulation and load regulation. Other output voltages available, contact sales for details. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load. For output negative connected to ground add suffix -G. Mechanical Details 0.02 (0.5) AC INPUT IEC-320-C8 INLET (Optional C2 Version) 0.04 (1.0) 1.65 (42.0) 3.90 (99.0) 1.22 (31.0) ACDC AEL20 Models and Ratings AC INPUT IEC-320-C6 INLET Notes 1. 2. 3. 4. 5. 6. 7. 8. All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max. Output connector: 0.22 (5.5) outer diameter barrel, 0.10 (2.5) inner diameter barrel with centre positive (+) and outer shell negative (-). Length is 0.433 (11.0). Output cable length is 48” (1220mm) approx. Weight: 0.37 lbs (170 g) For European mains lead order part: EU-MAINS-C5 for AEL20, EU-MAINS-8 for AEL20 Class II. For UK mains lead order part: UK-MAINS-5 for AEL20, UK-MAINS-8 for AEL20 Class II. For US mains lead order part: US-MAINS-5 for AEL20, US-MAINS-8 for AEL20 Class II. Mains lead length is 78“ (2000 mm) approx Output Power 25 W 35 W 40 W Output Voltage(2) Output Current Total Regulation(1) Efficiency(4) 5 VDC 5.00 A 7% 79% Model Number(5) AEL40US05(3) 8 VDC 4.37 A 5% 82% AEL40US08(3) 9 VDC 3.88 A 5% 83% AEL40US09(3) 12 VDC 3.33 A 5% 87% AEL40US12 15 VDC 2.67 A 5% 87% AEL40US15 18 VDC 2.22 A 5% 86% AEL40US18 24 VDC 1.67 A 3% 86% AEL40US24 36 VDC 1.11 A 3% 89% AEL40US36 48 VDC 0.83 A 3% 91% AEL40US48 Notes 1. 2. 3. 4. 5. Total regulation includes line regulation and load regulation. Other output voltages available, contact sales for details. Energy Efficiency Level IV Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load. For output negative connected to ground add suffix -G. Mechanical Details 0.04 (1.0) 0.04 (1.0) 1.36 (34.5) 4.65 (118.0) 2.05 (52.0) 0.02 (0.5) AC INPUT IEC-320-C14 INLET Notes 1. 2. 3. 4. 5. 6. 7. 8. All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max. Output connector: 0.22 (5.5) outer diameter barrel, 0.10 (2.5) inner diameter barrel with centre positive (+) and outer shell negative (-). Length is 0.433 (11.0). Output cable length is 48” (1220mm) approx. Weight: 0.64 lbs (275 g). For European mains lead order part: EU-MAINS-IEC. For UK mains lead order part: UK-MAINS-IEC. For US mains lead order part: US-MAINS-IEC. Mains lead length is 78“ (2000 mm) approx ACDC AEL40 Models and Ratings Max Output Power 57 W 63 W Output Voltage(2) Output Current Total Regulation(1) Efficiency(3) Model Number(4) 12 VDC 4.75 A 5% 87% AEL60US12 15 VDC 4.20 A 5% 88% AEL60US15 18 VDC 3.50 A 5% 88% AEL60US18 24 VDC 2.63 A 5% 88% AEL60US24 30 VDC 2.15 A 5% 90% AEL60US30 36 VDC 1.75 A 3% 90% AEL60US36 48 VDC 1.31 A 3% 90% AEL60US48 Notes 1. Total regulation includes line regulation and load regulation. 2. Other output voltages available, contact sales for details. 3. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load. 4. For output negative connected to ground add suffix -G. Mechanical Details 0.04 (1.0) 0.04 (1.0) 1.36 (34.5) 4.65 (118.0) 0.02 (0.5) 2.05 (52.0) ACDC AEL60 Models and Ratings AC INPUT IEC-320-C14 INLET Notes 1. 2. 3. 4. 5. 6. 7. 8. All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max. Output connector: 0.22 (5.5) outer diameter barrel, 0.10 (2.5) inner diameter barrel with centre positive (+) and outer shell negative (-). Length is 0.433 (11.0). Output cable length is 48” (1220mm) approx. Weight: 0.79 lbs (340 g). For European mains lead order part: EU-MAINS-IEC. For UK mains lead order part: UK-MAINS-IEC. For US mains lead order part: US-MAINS-IEC. Mains lead length is 78“ (2000 mm) approx Max Output Power Output Voltage(2) Output Current Efficiency(4) Model Number(5) 12 VDC 6.66 A 5% 85% AEL80US12(3) 15 VDC 5.38 A 5% 87% AEL80US15(3) 18 VDC 4.44 A 5% 88% AEL80US18 24 VDC 3.33 A 5% 87% AEL80US24 30 VDC 2.66 A 5% 87% AEL80US30 36 VDC 2.22 A 5% 88% AEL80US36 48 VDC 1.66 A 5% 88% AEL80US48 80 W Total Regulation(1) Notes 4. Minimum average of efficiencies measured at 25%, 50%, 75% & 100% load. 5. For output negative connected to ground add suffix -G. 1. Total regulation includes line regulation and load regulation. 2. Other output voltages available, contact sales for details. 3. Energy Efficiency Level IV. Mechanical Details 5.75 (146.0) 0.04 (1.0) Pin Connections Pin Function 1 RTN 2 RTN 3 +VE 4 RTN +VE SHELL GND 0.04 (1.0) 1.69 (43.0) 5 3 AC INPUT IEC-320-C14 INLET DC Output 5 Pin Plug 1.41 (36.0) 2.99 (76.0) 0.02 (0.5) 5 2 1 4 Notes 1. 2. 3. 4. 5. 6. 7. 8. All dimensions are shown in inches (mm). Tolerance ±0.04 (±1.0) max. Output connector: 5 pin 180° DIN Output cable length: 48” (1220mm) approx. Weight: 1.5 lbs (700 g) For European mains lead order part: EU-MAINS-IEC. For UK mains lead order part: UK-MAINS-IEC. For US mains lead order part: US-MAINS-IEC. Mains lead length is 78“ (2000 mm) approx 28-Aug-14 ACDC AEL80 Models and Ratings