Fiber Coupled Laser Module (830 nm) FCLM830 Series The FCLMTM Laser Module is a temperature stabilized semiconductor laser coupled with single mode fiber. It features very low M2 value Gaussian beam output with excellent beam pointing stability at a wide temperature dynamic range. The unique designed electrical driver enable this optical engine has the lowest power consumptions compare to the similar product in the industry. The FCLMTM Laser Module is a Class III b laser product Performance Specificationns Condition Min Typ Max Unit Optical Performance Wavelength Output Power T= 25°C 830 nm T= 25°C 20 10~20 MHz 0.1 0.3 % Power Stability 1hrs, T= 25°C 0.25 0.5 % Power Stability 24hrs, T= 25°C 0.75 1 Noise(RMS) Polarization Extinction Ratio mW 15 % dB Collimated Beam Parameters M2 Beam Diameter 1.2 1/e2 0.7, 0.9, 1.5, 2.0, 4.0, 6.0 mm Beam Divergence full angle 1 mrad Pointing Stability 2hrs, T= 25°C 5 urad 1 urad/°C Pointing Stability Fiber Information Length Fiber Type Mode Field Diameter NA Fiber Jacket Diameter 1, 2, 3 m SM / PM 3 um 0.12 3 mm Power Supply 9 V Power Consumption 3 Electrical Parameters W Current(TEC) 2 A Current(LD) 200 mA Control Power Setting Plug & Play ESD Protection Power Adjustable LD Current Full Protection LD Temperature Stabilized Compact Size Applications 10 Temperature Stability Features 0.2 °C ACC Polarization Maintaining Fiber High Speed Modulation Remote Control Collimated & Focused Beam Metal Jacket Protection 0% ~ 100% output power Environmental Conditions Storage Temperature Operation Temperature 0 to + 50 °C + 10 to + 40 °C Operation Humidity No Condensing Package Dimensions * 112 x 56 x 26.5 mm Note: * The mechanical tolerance should be +/-0.2 mm on all package dimensions unless otherwise custom specified. R03.20090331 Fiber Coupled Laser Module FCLM830 Series 46335 Landing Pkwy Fremont, CA 94538 Tel: (510) 933-7200 Fax: (510) 933-7300 Email: [email protected] • www.oplink.com Mechanical Drawing / Package Dimensions (dimension in mm) Ordering Information Oplink can provide a remarkable range of customized optical solutions. For detail, please contact Oplink’s OEM design team or account manager for your requirements and ordering information (510) 933-7200. FCLM 8 3 0 Control Type Wavelength Connector Type Local = L Remote = R 830 nm= 830 Power Output 20mW = 20 Operation Type DC = D Modulation = M None = 1 FC/PC = 2 FC/APC = 3 Fiber Length Fiber Type Beam Size Single Mode = S Polarization Maintain = P 0.7mm = 1 0.9mm = 2 1.5mm = 3 2.0mm = 4 4.0mm = 5 6.0mm = 6 None = 0 1 Meter 3mm Cable = 1 3 Meter 3mm Cable = 2 1 Meter Metal Jacket = 3 3 Meter Metal Jacket = 4 2 Meter 3mm Cable = 5 2 Meter Metal Jacket = 6 This component does not comply with the Federal Regulations (21 CFR Subchapter1 ) as administered by the Center for Devices and Radiological health. Purchaser acknowledges that his/ her products must comply with these regulations before they can be sold to a customer. The output light from this product is harmful to a human body even if it is invisible. Avoid looking at the output of this product directly, or through a lens during operation. Observance of operation should be through a TV camera or related equipment. Refer to IEC 825-1 and 21 CFR 1040.101040.11 as a radiation safety standard for laser products. Oplink follows a policy of continuous product improvement. Specifications are subject to change without prior notice. The module’s warranty is 1 year. R03.20090331 Product Lines: Mux/Demux Switching/Routing Coupling/Splitting Monitoring/Conditioning Amplification Transmission Interconnect RGB Laser Modules