Magnetics Shielded Low Profile Surface Mount Inductors MODEL HM73 Features Operating Temperature Range -40°C to +155°C Temperature Rise, Maximum 50°C Operating Frequency Up to 400kHz (For HM73-SXXXXLF models Up to 800kHz) RoHS Compliant Specifications @ 25°C Inductance 100 kHz 0.1V @ 0 Adc μH ± 20% @ Irated μH Typ. Irated (1) Rated Current Amps HM73-10R10LF HM73-10R10LLF 0.10 0.10 0.09 0.09 22.0 22.0 26.7 28.0 HM73-10R20LF 0.22 0.20 17.0 HM73-10R20LLF HM73-10R47LF HM73-10R68LF HM73-101R0LF HM73-101R0LLF HM73-101R5LF HM73-102R0LF HM73-106R0LF HM73-106R4LF HM73-12R68LF HM73-S121R0LF HM73-S121R8LF HM73-15R10LF HM73-15R20LF HM73-15R47LF HM73-15R70LF HM73-151R0LF HM73-151R2LF HM73-151R5LF HM73-S152R1LF HM73-152R2LF HM73-152R4LF HM73-153R3LF HM73-154R7LF HM73-201R0LF HM73-201R5LF HM73-30R60LF HM73-301R0LF HM73-301R5LF HM73-302R2LF HM73-303R9LF HM73-304R6LF HM73-316R4LF HM73-318R2LF HM73-31100LF HM73-40R15LF HM73-40R30LF HM73-40R40LF 0.22 0.47 0.68 1.00 1.00 1.50 2.00 6.00 6.40 0.68 1.00 1.80 0.108 0.20 0.47 0.70 1.00 1.20 1.50 2.10 2.20 2.40 3.30 4.70 1.00 1.50 0.60 1.00 1.50 2.20 3.90 4.60 6.40 8.20 10.0 0.15 0.30 0.40 0.20 0.42 0.64 1.00 0.90 1.30 1.70 5.00 5.80 0.60 0.80 1.40 0.103 0.17 0.42 0.65 0.95 1.07 1.33 1.68 2.10 1.92 3.00 3.50 0.91 1.43 0.54 0.89 1.25 2.00 3.60 4.10 5.65 7.72 8.90 0.13 0.27 0.37 17.0 15.0 12.0 8.5 6.0 6.5 8.0 4.8 3.5 16.0 10.0 6.0 30.0 21.0 17.0 16.0 10.0 14.0 10.0 11.0 8.0 15.0 10.0 10.0 16.0 13.0 27.0 23.0 18.0 12.0 10.0 9.0 6.5 5.6 6.0 40.0 40.0 40.0 Part Number Heating(2) Current Amps Isat (3) Saturation Current Amps mΩ Typ. mΩ Max. Height Inch/mm Max. 38.0 38.0 1.40 1.20 1.65 1.40 .138/3.50 .124/3.15 2 1 23.0 23.0 1.80 2.10 .138/3.50 2 23.0 19.2 14.9 14.9 10.9 12.7 11.8 6.0 6.0 20.0 12.0 8.0 40.8 35.3 26.7 27.7 22.0 23.0 22.9 12.0 16.1 17.0 16.0 15.6 18.8 16.4 30.1 25.8 16.0 15.0 13.7 12.4 7.8 7.3 6.9 44.7 40.8 40.0 23.0 23.0 28.0 15.0 18.0 11.0 11.0 4.8 6.0 30.0 12.0 7.0 51.0 40.0 35.0 30.0 34.0 23.0 25.0 16.0 13.0 20.0 18.0 16.0 32.0 22.0 40.0 34.0 30.0 24.0 18.0 14.0 16.0 16.0 10.0 80.0 73.0 61.0 1.80 2.70 4.50 5.20 8.40 6.20 7.20 26.00 26.00 2.70 3.50 7.00 0.60 0.80 1.40 1.30 2.00 2.00 1.90 6.50 3.85 3.35 4.50 4.80 2.80 3.70 1.10 1.50 1.90 4.40 5.70 6.50 16.60 18.80 20.80 0.50 0.60 0.65 2.10 3.16 5.20 7.00 9.20 8.30 8.30 30.00 30.00 3.20 4.00 7.30 0.70 0.90 1.55 1.50 2.20 2.30 2.20 7.80 4.60 4.00 5.00 5.30 3.30 4.40 1.40 1.85 2.30 5.10 7.20 8.30 25.00 26.00 26.00 0.55 0.75 1.00 .124/3.15 .158/4.00 .158/4.00 .158/4.00 .126/3.20 .177/4.50 .177/4.50 .197/5.00 .197/5.00 .197/5.00 .177/4.50 .177/4.50 .185/4.70 .158/4.00 .158/4.00 .220/5.60 .220/5.60 .232/5.90 .216/5.50 .177/4.50 .216/5.50 .224/5.70 .287/7.30 .288/7.30 .177/4.50 .177/4.50 .216/5.50 .216/5.50 .216/5.50 .216/5.50 .216/5.50 .216/5.50 .197/5.00 .197/5.00 .197/5.00 .256/6.50 .256/6.50 .256/6.50 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 1 1 1 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc DC Resistance Figure BI Technologies A-1445, Jalan Tanjung Api 25050 Kuantan Pahang Darul Makmur Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 http://www.ttelectronics.com/magnetics/customer-service-enquiry Rev. 02 8.17 Shielded Low Profile Surface Mount Inductors MODEL HM73 Specifications @ 25°C (continued) Part Number Inductance 100 kHz 0.1V @ 0 Adc @ Irated μH Typ. μH ± 20% Irated (1) Rated Current Amps Heating(2) Current Amps Isat (3) Saturation Current Amps DC Resistance mΩ Typ. mΩ Max. Height C Inch/mm Max. Figure HM73-40R50LF HM73-40R90LF 0.50 0.90 0.46 0.80 40.0 25.0 40.0 28.8 49.0 40.0 0.80 1.20 1.00 1.40 .256/6.50 .256/6.50 1 1 HM73-402R2LF 2.20 1.90 15.0 20.8 27.0 2.30 2.60 .256/6.50 1 HM73-403R0LF HM73-403R3LF HM73-509R1LF HM73-50100LF HM73-50120LF HM73-50140LF HM73-5015R5LF HM73-5020R9LF HM73-5026R5LF HM73-601R0LF HM73-602R02LF 3.00 3.30 9.10 10.0 12.0 14.0 15.5 20.9 26.5 1.00 2.02 2.40 2.64 7.40 8.00 10.59 12.00 13.00 17.00 22.50 0.80 1.62 17.0 17.0 8.0 8.0 7.0 5.5 5.0 4.5 4.6 30.0 20.0 19.0 21.0 10.5 10.2 8.7 9.5 9.9 8.0 7.0 38.0 28.0 23.0 24.0 15.0 15.0 13.0 10.0 10.0 8.0 8.8 45.0 28.0 3.90 3.30 9.10 9.60 13.00 11.00 15.00 16.00 21.00 1.00 1.85 4.70 4.20 10.80 11.40 15.00 13.20 18.20 19.00 25.20 1.20 2.22 .256/6.50 .276/7.00 .295/7.50 .295/7.50 .295/7.50 .335/8.50 .315/8.00 .335/8.50 .355/9.00 .287/7.30 .323/8.20 1 1 1 1 1 1 1 1 1 1 1 Notes: (1) The rated current is the approximate current at which inductance will be decreased by 20% from its initial (zero DC) value. (2) The Heating Current is the DC current which causes the component temperature to increase by approximately 50°C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the component for 30 minutes. (3) Isat is the saturation current at which inductance rolls off approximately 30% from its initial unbiased inductance value. (4) PC Board layout, proximity of other components, trace size and airflow will affect temperature rise and must be considered when selecting an inductor. Packaging Embossed Tape and Reel (1) Case size 10, 10L & 12 Reel: Diameter: Capacity: (2) Standard: = 7”(177.8mm) 13” (330.2mm) 250 Units 1000 Units Other case sizes Reel: Diameter: Case size 15, 20, 30, 31, 40, 50, 60 = 13” (330.2mm) Capacity: Case size 20, 30, 31, 40 * = 400 Units Case size 15 = 500 Units Case size 50, 60 = 250 Units * Except for HM73-403R3LFTR13 which is 300 units per reel. Ordering Information HM73 - S 12 1R0 LF TR13 Model Series Type S _ Low loss core material (No code used for normal material) Case Size: 10, 31 = Figure 2 10, 10L, 12, 15, 20, 30, 40, 50, 60 = Figure 1 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc Tape & Reel Packing 7 – 7” reel 13 – 13” reel Lead Free Inductance Code: First 2 digits are significant. Last digit denotes the number of trailing zeros. For values below 10μH, “R“ denotes the decimal point. BI Technologies A-1445, Jalan Tanjung Api 25050 Kuantan Pahang Darul Makmur Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 http://www.ttelectronics.com/magnetics/customer-service-enquiry Rev. 02 8.17 Shielded Low Profile Surface Mount Inductors MODEL HM73 Outline Dimensions (Inch/mm) Figure 1 Top View Figure 2 Top View Bottom View Side View Bottom View Side View Refer to Refer to Recommended Solder Pad Layout F Typ. E Typ. F Typ. Case size Inductance Code Fig. 10 All Models 2 10 & 10L All Models 1 12 All Models 1 15 All Models 1 20 All Models 1 30 All Models 1 31 All Models 2 R15, R40 & 3R3 1 R30, R50 R90, 2R2 & 3R0 1 50 All Models 1 60 All Models 1 40 A .295 7.50 .285 7.23 .295 7.50 .461 11.70 .531 13.5 .552 14.0 .512 13.0 .575 14.6 .556 14.1 .531 13.5 .591 15.0 B .271 6.90 .265 6.73 .265 6.73 .413 10.50 .512 13.0 .512 13.0 .512 13.0 .512 13.0 .512 13.0 .512 13.0 .512 13.0 D .138 3.50 .086 2.20 .086 2.20 .098 2.50 .158 4.00 .158 4.00 .295 7.50 .158 4.00 .158 4.00 .158 4.00 .165 4.20 E .138 3.50 .098 2.50 .098 2.50 .177 4.50 .236 6.00 .236 6.00 .236 6.00 .236 6.00 .236 6.00 .236 6.00 .236 6.00 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc F .098 2.50 .098 2.50 .098 2.50 .142 3.60 .158 4.00 .167 4.25 .177 4.50 .177 4.50 .167 4.25 .158 4.00 .197 5.00 G .079 ± .020 2.0 ± 0.5 .079 ± .020 2.0 ± 0.5 .079 ± .020 2.0 ± 0.5 .09 ± .020 2.3 ± 0.5 .118 ± .020 3.0 ± 0.5 .118 ± .020 3.0 ± 0.5 .118 ± .020 3.0 ± 0.5 .118 ± .020 3.0 ± 0.5 .118 ± .020 3.0 ± 0.5 .118 ± .020 3.0 ± 0.5 .118 ± .020 3.0 ± 0.5 H .126 ± .020 3.2 ± 0.5 .126 ± .020 3.2 ± 0.5 .126 ± .020 3.2 ± 0.5 .197 ± .020 5.0 ± 0.5 .240 ± .020 6.1 ± 0.5 .240 ± .020 6.1 ± 0.5 .240 ± .020 6.1 ± 0.5 .240 ± .020 6.1 ± 0.5 .240 ± .020 6.1 ± 0.5 .240 ± .020 6.1 ± 0.5 .250 ± .020 6.35 ± 0.5 I .118 ± .020 3.0 ± 0.5 .053 ± .020 1.35 ± 0.5 .053 ± .020 1.35 ± 0.5 .079 ± .020 2.0 ± 0.5 .091 ± .020 2.3 ± 0.5 .091 ± .020 2.3 ± 0.5 .217 ± .020 5.5 ± 0.5 .091 ± .020 2.3 ± 0.5 .091 ± .020 2.3 ± 0.5 .091 ± .020 2.3 ± 0.5 .094 ± .020 2.4 ± 0.5 BI Technologies A-1445, Jalan Tanjung Api 25050 Kuantan Pahang Darul Makmur Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 http://www.ttelectronics.com/magnetics/customer-service-enquiry Rev. 02 8.17