LB-302FP Series LED displays High efficiency, two-digit numeric displays LB-302FP Series !External dimensions (Units : mm) 15.5 0.7 (10.16) 0.7 !Features 1) Height of character : 7.62 mm 2) High efficiency in a compact package. 3) Common anode and common cathode configurations are available for red, orange and green. 4) The package surface is painted black and the segments are milky white. 7.62 15.0 10° 7.0 C0.5 7.2 3.94 φ0.5 (2.54) (10.16) 5.3±0.5 The LB-302FP series were designed to meet the need for multi-digit numeric displays. These two-digit LED numeric displays have a character height of 7.62 mm. Tolerances are ±0.25 unless otherwise noted: !Selection guide Emitting color Red Orange Green Anode LB-302VF LB-302DF∗ LB-302MF Cathode LB-302VP LB-302DP∗ LB-302MP Common ∗Order-based production. !Pin assignments 10 9 8 7 6 + + + + + a a f f b b g e g e c d + Pin No. 1 c d Dig.1 + + + 2 3 4 Dig.2 + 5 Pin No. Function 1 2 3 4 5 6 7 8 9 10 Segment "g" D.P Segment "a" Segment "f" Digit 2 Common Segment "d" Segment "e" Segment "c" Segment "b" Digit 1 Common LB-302FP Series LED displays !Internal circuit schematic (example of common cathode) Pin No. 10 Dig.1 5 Dig.2 Pin No. 3 9 b a 8 c 6 d 7 e 4 f 1 g 2 D.P !Absolute maximum ratings (Ta = 25°C) Parameter Symbol Red Orange Green LB-302VF / VP LB-302DF / DP LB-302MF / MP Unit Power dissipation PD 800 800 960 mW Power dissipation PD / seg 50 50 60 mW Forward current IF 15 15 20 mA Peak forward current IFP 60∗ 60∗ 60∗ mA VR 5 5 5 Reverse voltage V Operating temperature Topr −25~+75 °C Storage temperature Tstg −30~+85 °C ∗ Pulse width 1ms duty 1 / 5 ! Electrical and optical characteristics (Ta = 25°C) Parameter Symbol Conditions Red Min. Orange Typ. Max. Min. Green Typ. Max. Min. Typ. Max. Unit Forward voltage VF IF = 10mA − 2.0 2.8 − 2.0 2.8 − 2.1 2.8 V Reverse current IR VR = 5V − − 100 − − 100 − − 100 µA Peak wavelength λP IF = 10mA − 650 − − 610 − − 563 − nm Spectral line half width ∆λ IF = 10mA − 40 − − 40 − − 40 − nm Not designed for radiation resistance. ! Luminous intensity Color λP Type Min. Typ. Max. Unit Red 650 LB-302VF / VP 2.2 6.3 − mcd Orange 610 LB-302DF / DP 2.2 6.3 − mcd Green 563 LB-302MF / MP 2.2 6.3 − mcd Note : Measured at IF = 10mA Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.0