™ ANT-DB1-VDP-xxx DATA SHEET Product Dimensions 0.87” (22.0) Description The VDP Series is a compact, center-fed antenna that achieves efficient operation at any or all of three frequency bands. Its durable, unobtrusive housing attaches permanently with integral adhesive to flat, non-conductive surfaces such as windows, drywall, ceiling tiles, plastic, etc. The antenna is supplied with 9.8 feet (3m) of RG-174 cable that enters from the bottom to facilitate vertical orientation. It can be terminated in a TNC, standard SMA, or FCC Part 15 compliant RP-SMA connector. 0.18” (4.52) Features • • • • • • • • 4.53” (115.0) Tri-band (824-960MHz, 1.71-1.99GHz, and 2.401-2.483GHz) Center-fed from the bottom Surface-mount Low VSWR Excellent performance Omni-directional pattern Fully weatherized, durable, & unobtrusive TNC, SMA or RP-SMA connector Electrical Specifications • Recm. Freq. Range • Wavelength • VSWR • Impedance • Connector • Cable 0.55” (14.0) 0.31” (7.9) TNC Connector SMA, RP-SMA Connector Band 1 824-960MHz Band 2 1.71-1.99GHz Band 3 2.40-2.48GHz 1/2-wave Band 1 ≤1.5 typ. at center Band 2 ≤1.9 typ. at center Band 3 ≤1.9 typ. at center 50 ohms TNC, SMA or RP-SMA 9.8’ RG-174 coax Ordering Information • ANT-DB1-VDP-TNC (with TNC connector) • ANT-DB1-VDP-SMA (with SMA connector) • ANT-DB1-VDP-RPS (with RP-SMA connector) VSWR Graph S11 SWR 1.530 CENTER 910.000MHz CENTER 1 825.000MHz CENTER 2 450.000MHz 2.028 2.024 SPAN 200.000MHz Typical VSWR Antenna Factor 159 Ort Lane Merlin, OR 97532 www.antennafactor.com 541-956-0931 (phone) 541-471-6251 (fax) Rev 8-17-10