Axial Lead Transient Voltage Suppressors (TVS) SAC Series 6.5 To 90 V 1500W Low Capacitance Uni-directional Description Bi-directional The SAC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features u Glass passivated chip u 1500W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle): 0.01% u Low leakage u Excellent clamping capability u Very fast response time u RoHS compliant Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in Telecom, Computer, Industrial and Consumer electronic applications. Maximum Ratings (TA=25℃ unless otherwise noted) Parameter Symbol Value Unit PPPM 1500 Watts Peak Pulse Current with a 10/1000µs waveform.(Fig.2) (1) IPP See Next Table Amps Power Dissipation on Infinite Heat Sink at TL=75°C (Fig.2) PM(AV) 6.5 Watt TJ , TSTG -55 to +150 °C Peak Pulse Power Dissipation with a 10/1000µs waveform (1) Operating junction and Storage Temperature Range Notes: 1. Non-repetitive current pulse , per Fig. 3 and derated above TA= 25°C per Fig. 2 UN Semiconductor Co., Ltd. Revision October 18, 2013 www.unsemi.com.tw 1/5 @ UN Semiconductor Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Axial Lead Transient Voltage Suppressors (TVS) SAC Series 6.5 To 90 V Electrical Characteristics Part Number Reverse Stand-Off Voltage VRWM (V) LCE6.5 LCE6.5A LCE7.0 LCE7.0A LCE7.5 LCE7.5A LCE8.0 LCE8.0A LCE8.5 LCE8.5A LCE9.0 LCE9.0A LCE10 LCE10A LCE11 LCE11A LCE12 LCE12A LCE13 LCE13A LCE14 LCE14A LCE15 LCE15A LCE16 LCE16A LCE17 LCE17A LCE18 LCE18A LCE20 LCE20A LCE22 LCE22A LCE24 LCE24A LCE26 LCE26A LCE28 LCE28A LCE30A LCE33A LCE36A LCE40A LCE43A LCE45A LCE48A LCE51A LCE54A LCE58A LCE60A LCE64A LCE70A LCE75A LCE85A LCE90A 6.5 6.5 7.0 7.0 7.5 7.5 8.0 8.0 8.5 8.5 9.0 9.0 10.0 10.0 11..0 11.0 12.0 12.0 13.0 13.0 14.0 14.0 15.0 15.0 16.0 16.0 17.0 17.0 18.0 18.0 20.0 20.0 22.0 22.0 24.0 24.0 26.0 26.0 28.0 28.0 30.0 33.0 36.0 40.0 43.0 45.0 48.0 51.0 54.0 58.0 60.0 64.0 70.0 75.0 85.0 90.0 1500W Low Capacitance (TA=25℃ unless otherwise noted) Breakdown Voltage VBR @IT (V) Min Max 7.22 7.22 7.78 7.78 8.33 8.33 8.89 8.89 9.44 9.44 10.00 10.00 11.10 11.10 12.20 12.20 13.30 13.30 14.40 14.40 15.60 15.60 16.70 16.70 17.80 17.80 18.90 18.90 20.00 20.00 22.20 22.20 24.40 24.40 26.70 26.70 28.90 28.90 31.10 31.10 33.30 36.70 40.00 44.40 47.80 50.00 53.30 56.70 60.00 64.40 66.70 71.10 77.80 83.30 94.40 100.00 8.82 7.98 9.51 8.60 10.20 9.21 10.90 9.83 11.50 10.40 12.20 11.10 13.60 12.30 14.90 13.50 16.30 14.70 17.60 15.90 19.10 17.20 20.40 18.50 21.80 19.70 23.10 20.90 24.40 22.10 27.10 24.50 29.80 26.90 32.60 29.50 35.30 31.90 38.00 34.40 36.80 40.60 44.20 49.10 52.80 55.30 58.90 62.70 66.30 71.20 73.70 78.60 86.00 92.10 104.00 111.00 Test Current IT (mA) Maximum Reverse Leakage IR @VRWM (μA) Maximum Clamping Voltage VC @IPP (V) Maximum Peak Pulse Current IPP (A) Maximum Junction Capacitance @0V (pF) Working Inverse Blocking Voltage VWIB (V) Inverse Blocking Leakage Current IIB @VWIB(mA) Peak Inverse Voltage VPIB (V) 10 10 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1000 1000 500 500 250 250 100 100 50 50 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 12.3 11.2 13.3 12.0 14.3 12.9 15.0 13.6 15.9 14.4 16.9 15.4 18.8 17.0 20.1 18.2 22.0 19.9 23.8 21.5 25.8 23.2 26.9 24.4 28.8 26.0 30.5 27.6 32.2 29.2 35.8 32.4 39.4 35.5 43.0 38.9 46.6 42.1 50.1 45.5 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 129.0 146.0 100 100 100 100 100 100 100 100 94 100 89 97 80 88 74 82 68 75 63 70 58 65 56 61 52 57 49 54 46 51 42 46 38 42 35 39 32 36 30 33 31 28 26 23 22 21 19 18 17 16 16 15 13 12 12 10 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 100 100 100 100 125 125 125 125 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 125 125 125 125 150 150 150 150 UN Semiconductor Co., Ltd. Revision October 18, 2013 www.unsemi.com.tw 2/5 @ UN Semiconductor Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Axial Lead Transient Voltage Suppressors (TVS) SAC Series 6.5 To 90 V 1500W Low Capacitance Ratings and Characteristic Curves (TA=25°C unless otherwise noted) Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve 100 Percentage of Rated Power (IPP) PPPM - Peak Pulse Power (kW) 100 10 1 Power Dissipation 80 60 Peak Power (Single Pulse) TJ=Initial Temperature 40 20 0 0.1 0.1 1 10 100 td - Pulse Width (μs) 1000 10000 0 25 50 75 100 125 TL - Lead temperature(°C) 150 175 Figure 4 – AC Line Protection Application Figure 3 - Pulse Waveform IPPM - Peak Pulse Current, % IRSM 150 tr=10µsec Peak Value IPPM TJ=25°C Pulse Width(td) is defined as the point where the peak current decays to 50% of IPPM Low Capacitance 100 TVS Half Value IPPM (IPPM/2) 50 10/1000µsec. Waveform as defined by R.E.A Application Note: Device must be used with two units in parallel, opposite in polarity as shown in circuit for AC signal line protection. tc 0 0 1.0 2.0 t - Time (ms) 3.0 4.0 UN Semiconductor Co., Ltd. Revision October 18, 2013 www.unsemi.com.tw 3/5 @ UN Semiconductor Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Axial Lead Transient Voltage Suppressors (TVS) SAC Series 6.5 To 90 V 1500W Low Capacitance Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued) Environmental Specifications Physical Specifications Weight 0.032 ounce, 0.9 gram Case JEDEC DO-201 Molded Plastic over glass passivated junction Polarity Color band denotes cathode except Bipolar Terminal Matte Tin-plated leads, Solderable per JESD22-B102D Temperature Cycle JESD22-A104 Pressure Cooker JESD22-A102 High Temp. Storage JESD22-A103 HTRB JESD22-A108 Thermal Shock JESD22-A106 Soldering Parameters Reflow Condition Lead–free assembly TP Critical Zone TL to TP Ramp-up Temperature TL TS(max) Pre Heat Ramp-down TS(min) Preheat -Temperature Min (Ts(min)) 150°C -Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 -180 Seconds Average ramp up rate ( Liquidus Temp TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max 25 Time to peak temperature (t 25℃ to peak) Time - Temperature (TL) (Liquidus) 217°C - Time (min to max) (ts) 60 -150 Seconds Reflow Peak Temperature (TP) Time within 5°C Temperature (tp) 260 +0/-5°C of actual peak 20 -40 Seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max Do not exceed 280°C Dimensions Inches DO-201 Min Max Min Max A 1.000 - 25.40 - B 0.285 0.375 7.24 9.53 C 0.038 0.042 0.97 1.07 D 0.189 0.209 4.79 5.30 Cathode Band UN Semiconductor Co., Ltd. Revision October 18, 2013 Millimeters Dimensions www.unsemi.com.tw 4/5 @ UN Semiconductor Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Axial Lead Transient Voltage Suppressors (TVS) SAC Series 6.5 To 90 V 1500W Low Capacitance Part Numbering LCE×××A 5% VBR VOLTAGE TOLERANCE VR VOLTAGE SERIES Packaging Part Number Component Package LCEXXX Packaging Dimensions Quantity Packaging Option 1000 Box DO-201 Unit: Inches (Millimeters) 2.56 (65.00) 0.25 (6.35) 0.40±0.020 (10.16±0.508) UN Semiconductor Co., Ltd. Revision October 18, 2013 www.unsemi.com.tw 5/5 @ UN Semiconductor Co., Ltd. 2013 Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.