ON LM2931CD2TR4G 100 ma, adjustable output, ldo voltage regulator with 60 v load dump protection Datasheet

LM2931, NCV2931 Series
100 mA, Adjustable Output,
LDO Voltage Regulator with
60 V Load Dump Protection
The LM2931 series consists of positive fixed and adjustable output
voltage regulators that are specifically designed to maintain proper
regulation with an extremely low input−to−output voltage differential.
These devices are capable of supplying output currents in excess of
100 mA and feature a low bias current of 0.4 mA at 10 mA output.
Designed primarily to survive in the harsh automotive environment,
these devices will protect all external load circuitry from input fault
conditions caused by reverse battery connection, two battery jump
starts, and excessive line transients during load dump. This series also
includes internal current limiting, thermal shutdown, and additionally,
is able to withstand temporary power−up with mirror−image insertion.
Due to the low dropout voltage and bias current specifications, the
LM2931 series is ideally suited for battery powered industrial and
consumer equipment where an extension of useful battery life is
desirable. The ‘C’ suffix adjustable output regulators feature an output
inhibit pin which is extremely useful in microprocessor−based systems.
Features
•
•
•
•
•
•
•
•
•
•
•
•
Input−to−Output Voltage Differential of < 0.6 V @ 100 mA
Output Current in Excess of 100 mA
Low Bias Current
60 V Load Dump Protection
−50 V Reverse Transient Protection
Internal Current Limiting with Thermal Shutdown
Temporary Mirror−Image Protection
Ideally Suited for Battery Powered Equipment
Economical 5−Lead TO−220 Package with Two Optional Leadforms
Available in Surface Mount SOP−8, D2PAK and DPAK Packages
High Accuracy (±2.5%) Reference (LM2931AC) Available
Pb−Free Packages are Available
FIXED OUTPUT VOLTAGE
TO−92
Z SUFFIX
CASE 29
• Battery Powered Consumer Products
• Hand−held Instruments
• Camcorders and Cameras
Pin 1. Output
2. Ground
3. Input
1
2
3
TO−220
T SUFFIX
CASE 221AB
1
2
3
DPAK
DT SUFFIX
CASE 369A
1
D2PAK
D2T SUFFIX
CASE 936
Pin 1. Input
2. Ground
3. Output
3
1
3
SOT−223
ST SUFFIX
CASE 318H
3
1
ADJUSTABLE OUTPUT VOLTAGE
TO−220
TH SUFFIX
CASE 314A
1
5
TO−220
1
TV SUFFIX
CASE 314B
TO−220
T SUFFIX
CASE 314D
Applications
SOIC−8
D SUFFIX
CASE 751
http://onsemi.com
5
1
Pin 1. Adjust
2. Output
Inhibit
3. Ground
4. Input
5. Output
5
D2PAK
D2T SUFFIX 1
CASE 936A
8
5
1
FIXED
N.C.
5
4
8
1
GND
Input
N.C.
GND
Output
(Top View)
© Semiconductor Components Industries, LLC, 2007
March, 2007 − Rev. 20
ORDERING INFORMATION
ADJUSTABLE
Output
Inhibit
GND
5
4
Input
8
1
Adjust
See detailed ordering and shipping information in the package
dimensions section on page 12 of this data sheet.
GND
Output
DEVICE MARKING INFORMATION
See general marking and heatsink information in the device
marking section on page 15 of this data sheet.
(Top View)
1
Publication Order Number:
LM2931/D
LM2931, NCV2931 Series
Representative Schematic Diagram
Input
6.0
30 k
6.0 k
6.8 V
350
500
Output
Inhibit
Output
30 k
30 k
50 k
30 k *
48 k
180 k
184 k
3.94 k
Adjust
3.0 k
EPI
Bias
92.8 k *
35 k
11.5 k
Ground
*Deleted on Adjustable Regulators
This device contains 26 active transistors.
http://onsemi.com
2
10 k
5.8 V
LM2931, NCV2931 Series
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
VI
40
Vdc
Transient Input Voltage (t ≤ 100 ms)
VI(t)
60
Vpk
Transient Reverse Polarity Input Voltage
1.0% Duty Cycle, t ≤ 100 ms
−VI(t)
−50−
Vpk
−
−
−
2000
200
2000
V
V
V
PD
RqJA
RqJC
Internally Limited
178
83
W
°C/W
°C/W
PD
RqJA
RqJC
Internally Limited
65
5.0
W
°C/W
°C/W
PD
RqJA
RqJC
Internally Limited
242
21
W
°C/W
°C/W
PD
RqJA
RqJC
Internally Limited
92
6.0
W
°C/W
°C/W
PD
RqJA
RqJC
Internally Limited
160
25
W
°C/W
°C/W
PD
RqJA
RqJC
Internally Limited
70
5.0
W
°C/W
°C/W
TA
−40 to +125
°C
Input Voltage Continuous
Electrostatic Discharge Sensitivity (ESD)
Human Body Model (HBM) Class 2, JESD22 A114−C
Machine Model (MM) Class A, JESD22 A115−A
Charged Device Model (CDM), JESD22 C101−C
Power Dissipation
Case 29 (TO−92 Type)
TA = 25°C
Thermal Resistance, Junction−to−Ambient
Thermal Resistance, Junction−to−Case
Case 221A, 314A, 314B and 314D (TO−220 Type)
TA = 25°C
Thermal Resistance, Junction−to−Ambient
Thermal Resistance, Junction−to−Case
Case 318H (SOT−223)
TA = 25°C
Thermal Resistance, Junction−to−Ambient
Thermal Resistance, Junction−to−Case
Case 369A (DPAK) (Note 1)
TA = 25°C
Thermal Resistance, Junction−to−Ambient
Thermal Resistance, Junction−to−Case
Case 751 (SOP−8) (Note 2)
TA = 25°C
Thermal Resistance, Junction−to−Ambient
Thermal Resistance, Junction−to−Case
Case 936 and 936A (D2PAK) (Note 3)
TA = 25°C
Thermal Resistance, Junction−to−Ambient
Thermal Resistance, Junction−to−Case
Operating Ambient Temperature Range
Operating Die Junction Temperature
TJ
+150
°C
Storage Temperature Range
Tstg
−65 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. DPAK Junction−to−Ambient Thermal Resistance is for vertical mounting. Refer to Figure 25 for board mounted Thermal Resistance.
2. SOP−8 Junction−to−Ambient Thermal Resistance is for minimum recommended pad size. Refer to Figure 24 for Thermal Resistance
variation versus pad size.
3. D2PAK Junction−to−Ambient Thermal Resistance is for vertical mounting. Refer to Figure 26 for board mounted Thermal Resistance.
http://onsemi.com
3
LM2931, NCV2931 Series
ELECTRICAL CHARACTERISTICS (Vin = 14 V, IO = 10 mA, CO = 100 mF, CO(ESR) = 0.3 W, TA = 25°C [Note 4])
LM2931−5.0/NCV2931−5.0
Characteristic
Symbol
Min
Typ
Max
LM2931A−5.0/NCV2931A−5.0
Min
Typ
Max
Unit
FIXED OUTPUT
Output Voltage
VO
V
Vin = 14 V, IO = 10 mA, TA = 25°C
4.75
5.0
5.25
4.81
5.0
5.19
Vin = 6.0 V to 26 V, IO ≤ 100 mA,
TA = − 40° to +125°C
4.50
−
5.50
4.75
−
5.25
Line Regulation
Regline
mV
Vin = 9.0 V to 16 V
−
2.0
10
−
2.0
10
Vin = 6.0 V to 26 V
−
4.0
30
−
4.0
30
−
14
50
−
14
50
Load Regulation (IO = 5.0 mA to 100 mA)
Output Impedance
Regload
ZO
IO = 10 mA, DIO = 1.0 mA, f = 100 Hz to
10 kHz
Bias Current
mV
mW
−
200
−
−
200
−
IB
mA
Vin = 14 V, IO = 100 mA, TA = 25°C
−
5.8
30
−
5.8
30
Vin = 6.0 V to 26 V, IO = 10 mA, TA = − 40° to
+125°C
−
0.4
1.0
−
0.4
1.0
Output Noise Voltage (f = 10 Hz to 100 kHz)
Vn
−
700
−
−
700
−
mVrms
Long Term Stability
S
−
20
−
−
20
−
mV/kHR
RR
60
90
−
60
90
−
dB
Ripple Rejection (f = 120 Hz)
Dropout Voltage
VI−VO
V
IO = 10 mA
−
0.015
0.2
−
0.015
0.2
IO = 100 mA
−
0.16
0.6
−
0.16
0.6
Vth(OV)
26
29.5
40
26
29.5
40
V
−VO
−0.3
0
−
−0.3
0
−
V
Over−Voltage Shutdown Threshold
Output Voltage with Reverse Polarity Input
(Vin = −15 V)
4. Low duty cycle pulse techniques are used during test to maintain junction temperature as close to ambient as possible.
5. NCV devices are qualified for automotive use.
http://onsemi.com
4
LM2931, NCV2931 Series
ELECTRICAL CHARACTERISTICS (Vin = 14 V, IO = 10 mA, CO = 100 mF, CO(ESR) = 0.3 W, TA = 25°C [Note 6])
LM2931C/NCV2931C
Characteristic
Symbol
LM2931AC/NCV2931AC
Min
Typ
Max
Min
Typ
Max
1.14
1.08
1.20
−
1.26
1.32
1.17
1.15
1.20
−
1.23
1.25
Unit
ADJUSTABLE OUTPUT
Reference Voltage (Note 7, Figure 18)
IO = 10 mA, TA = 25°C
IO ≤ 100 mA, TA = − 40 to +125°C
Vref
V
Output Voltage Range
VO range
3.0 to
24
2.7 to
29.5
−
3.0 to
24
2.7 to
29.5
−
V
Line Regulation (Vin = VO + 0.6 V to 26 V)
Regline
−
0.2
1.5
−
0.2
1.5
mV/V
Load Regulation (IO = 5.0 mA to 100 mA)
Regload
−
0.3
1.0
−
0.3
1.0
%/V
−
40
−
−
40
−
−
−
−
6.0
0.4
0.2
−
1.0
1.0
−
−
−
6.0
0.4
0.2
−
1.0
1.0
IAdj
−
0.2
−
−
0.2
−
mA
Output Noise Voltage (f = 10 Hz to 100 kHz)
Vn
−
140
−
−
140
−
mVrms/V
Long−Term Stability
S
−
0.4
−
−
0.4
−
%/kHR
RR
0.10
0.003
−
0.10
0.003
−
%/V
−
−
0.015
0.16
0.2
0.6
−
−
0.015
0.16
0.2
0.6
Output Impedance
IO = 10 mA, DIO = 1.0 mA, f = 10 Hz to 10 kHz
ZO
Bias Current
IO = 100 mA
IO = 10 mA
Output Inhibited (Vth(OI) = 2.5 V)
IB
Adjustment Pin Current
Ripple Rejection (f = 120 Hz)
mW/V
mA
Dropout Voltage
IO = 10 mA
IO = 100 mA
VI−VO
Over−Voltage Shutdown Threshold
Vth(OV)
26
29.5
40
26
29.5
40
V
−VO
−0.3
0
−
−0.3
0
−
V
−
−
2.50
3.25
2.15
−
2.26
−
1.90
1.20
−
−
−
−
2.50
3.25
2.15
−
2.26
−
1.90
1.20
−
−
−
30
50
−
30
50
Output Voltage with Reverse Polarity Input
(Vin = −15 V)
Output Inhibit Threshold Voltages
Output “On”:
TA = 25°C
TA = − 40° to +125°C
Output “Off”:
TA = 25°C
TA = − 40° to +125°C
Output Inhibit Threshold Current (Vth(OI) = 2.5 V)
V
Vth(OI)
V
Ith(OI)
6. Low duty cycle pulse techniques are used during test to maintain junction temperature as close to ambient as possible.
7. The reference voltage on the adjustable device is measured from the output to the adjust pin across R1.
http://onsemi.com
5
mA
LM2931, NCV2931 Series
300
Vin −VO , DROPOUT VOLTAGE (mV)
Vin −VO , DROPOUT VOLTAGE (mV)
200
Vin = 14 V
DVout = 100 mV
TJ = 25°C
160
120
80
40
0
0
20
40
60
IO, OUTPUT CURRENT (mA)
80
Vin = 14 V
DVout = 100 mV
100
IO = 50 mA
IO = 10 mA
0
100
0
75
100
125
6.0
TJ = −40°C
VO , OUTPUT VOLTAGE (V)
I O , OUTPUT CURRENT (mA)
50
Figure 2. Dropout Voltage versus
Junction Temperature
350
TJ = 25°C
250
TJ = 85°C
150
Dashed lines below Vin = 5.0 V
are for Adjustable output devices only.
0
5.0
10
15
20
Vin, INPUT VOLTAGE (V)
25
5.0
Vout = 5.0 V
TA = 25°C
4.0
3.0
2.0
RL = 50 W
1.0
0
30
0
Figure 3. Peak Output Current versus Input Voltage
4.0
VO, OUTPUT VOLTAGE
(5.0 V/DIV)
3.0
2.0
Vout = 5.0 V
RL = 500 W
TA = 25°C
1.0
0
−20
−10
0
10
20
30
Vin, INPUT VOLTAGE (V)
40
50
2.0
3.0
4.0
Vin, INPUT VOLTAGE (V)
Vin , INPUT VOLTAGE
(10 V/DIV)
VCC = 15 V
VFB1 = 5.05 V
5.0
1.0
IO = 100 mA
5.0
6.0
Figure 4. Output Voltage versus Input Voltage
6.0
VO , OUTPUT VOLTAGE (V)
25
TJ, JUNCTION TEMPERATURE (°C)
Figure 1. Dropout Voltage versus Output Current
50
IO = 100 mA
200
60
Vout = 5.0 V
RL = 50 W
CO = 100 mF
t = 150 ms
TA = 25°C
0
0
Figure 5. Output Voltage versus Input Voltage
t, TIME (50 ms/DIV)
Figure 6. Load Dump Characteristics
http://onsemi.com
6
LM2931, NCV2931 Series
8.0
10
Vout = 5.0 V
TJ = 25°C
IB, BIAS CURRENT (mA)
IB, BIAS CURRENT (mA)
12
8.0
RL = 50 W
6.0
4.0
RL = 100 W
2.0
Vin = 14 V
Vout = 5.0 V
TJ = 25°C
6.0
4.0
2.0
RL = 500 W
0
0
−20
−10
0
10
20
30
Vin, INPUT VOLTAGE (V)
40
50
60
0
40
60
80
100
IO, OUTPUT CURRENT (mA)
Figure 8. Bias Current versus Output Current
Figure 7. Bias Current versus Input Voltage
2.0
8.0
IO , OUTPUT IMPEDANCE (Ω )
Vin = 14 V
Vout = 5.0 V
IB, BIAS CURRENT (mA)
20
IO = 100 mA
6.0
4.0
IO = 50 mA
2.0
Vin = 14 V
Vout = 5.0 V
IO = 10 mA
DIO = 1.0 mA
CO = 100 mF
TJ = 25°C
1.6
1.2
0.8
CO(ESR) = 0.3 W
Electrolytic
0.4
CO(ESR) = 0.15 W
Tantulum
IO = 0 mA
0
−55
0
−25
0
25
50
75
TJ, JUNCTION TEMPERATURE (°C)
100
10
125
Figure 9. Bias Current versus Junction Temperature
1.0 k
10 k
100 k
f, FREQUENCY (Hz)
1.0 M
10 M
Figure 10. Output Impedance versus Frequency
95
95
RR, RIPPLE REJECTION RATIO (dB)
RR, RIPPLE REJECTION RATIO (dB)
100
85
CO(ESR) = 0.15 W
Tantulum
Vin = 14 V
Vout = 5.0 V
DVin = 100 mV
RL = 500 W
CO = 100 mF
TJ = 25°C
75
65
CO(ESR) = 0.3 W
Electrolytic
55
10
100
1.0 k
10 k
100 k
1.0 M
85
Vin = 14 V
Vout = 5.0 V
f = 120 Hz
TJ = 25°C
75
65
10 M
0
f, FREQUENCY (Hz)
Figure 11. Ripple Rejection versus Frequency
20
40
60
IO, OUTPUT CURRENT (mA)
80
100
Figure 12. Ripple Rejection versus Output Current
http://onsemi.com
7
18.5
14
t, TIME (10 ms/DIV)
Figure 13. Line Regulation
OUTPUT CURRENT, OUTPUT VOLTAGE DEVIATION,
I out (mA)
Δ VO , (2.0 mV/DIV)
Vout = 5.0 V
RL = 500 W
CO = 100 mF
CO(ESR) = 0.3 W
TA = 25°C
V th(on/off) , OUTPUT INHIBIT-THRESHOLDS (V)
INPUT VOLTAGE,
V in, (V)
OUTPUT VOLTAGE DEVIATION,
Δ VO , (2.0 mV/DIV)
LM2931, NCV2931 Series
Vref, REFERENCE VOLTAGE (V)
1.240
LM2931C Adjustable
IO = 10 mA
Vin = Vout + 1.0 V
TA = 25°C
1.220
1.200
1.180
1.160
0
3.0
6.0
9.0
12
15
18
21
24
Vin = 14 V
Vout = 5.0 V
Cin = 1000 mF
100
CO = 100 mF
CO(ESR) = 0.3 W
TA = 25°C
0
t, TIME (10 ms/DIV)
Figure 14. Load Regulation
2.6
LM2931C Adjustable
IO = 10 mA
Vin = Vout + 1.0 V
TA = 25°C
2.5
Output Off"
2.4
2.3
2.2
Output On"
2.1
2.0
0
3.0
VO, OUTPUT VOLTAGE (V)
Figure 15. Reference Voltage versus Output Voltage
6.0
9.0
12
15
18
VO, OUTPUT VOLTAGE (V)
21
24
Figure 16. Output Inhibit−Thresholds
versus Output Voltage
APPLICATIONS INFORMATION
The LM2931 series regulators are designed with many
protection features making them essentially blow−out
proof. These features include internal current limiting,
thermal shutdown, overvoltage and reverse polarity input
protection, and the capability to withstand temporary
power−up with mirror−image insertion. Typical application
circuits for the fixed and adjustable output device are shown
in Figures 17 and 18.
The input bypass capacitor Cin is recommended if the
regulator is located an appreciable distance (≥ 4″) from the
supply input filter. This will reduce the circuit’s sensitivity
to the input line impedance at high frequencies.
This regulator series is not internally compensated and
thus requires an external output capacitor for stability. The
capacitance value required is dependent upon the load
current, output voltage for the adjustable regulator, and the
type of capacitor selected. The least stable condition is
encountered at maximum load current and minimum output
voltage. Figure 22 shows that for operation in the “Stable”
region, under the conditions specified, the magnitude of the
output capacitor impedance |ZO| must not exceed 0.4 W. This
limit must be observed over the entire operating temperature
range of the regulator circuit.
With economical electrolytic capacitors, cold temperature
operation can pose a serious stability problem. As the
electrolyte freezes, around −30°C, the capacitance will
decrease and the equivalent series resistance (ESR) will
increase drastically, causing the circuit to oscillate. Quality
electrolytic capacitors with extended temperature ranges of
−40° to +85°C and −55° to +105°C are readily available.
Solid tantalum capacitors may be a better choice if small size
is a requirement, however, the maximum ⏐ZO⏐ limit over
temperature must be observed.
Note that in the stable region, the output noise voltage is
linearly proportional to ⏐ZO⏐. In effect, CO dictates the high
frequency roll−off point of the circuit. Operation in the area
titled “Marginally Stable” will cause the output of the
regulator to exhibit random bursts of oscillation that decay
in an under−damped fashion. Continuous oscillation occurs
when operating in the area titled “Unstable”. It is suggested
that oven testing of the entire circuit be performed with
maximum load, minimum input voltage, and minimum
ambient temperature.
http://onsemi.com
8
LM2931, NCV2931 Series
Input
Vin
51 k
Cin
0.1
LM2931C
Adjustable
Output
Output
Inhibit
2
Output
Input
Cin
0.1
LM2931−5.0
Fixed
Output
IB
IAdj
GND
Vout
Switch Position 1 = Output On", 2 = Output Off"
CO
GND
ǒ
Ǔ
R
V out + V 1 ) 2 ) I R 2
ref
Adj
R1
22.5k w
R1R 2
R 1 ) R2
Figure 18. Adjustable Output Regulator
D45VH7
68
R2
Output
Figure 17. Fixed Output Regulator
Input
≥ 6.0 V
R1
Adjust
CO
1
IB
Vin
Vout
RSC
Input
R
R
LM2931−5.0
+
+
100
Output
5.0 V @ 5.0 A
LM2931−5.0
+
Output
The LM2931 series can be current boosted with a PNP transistor. The
D45VH7, on a heatsink, will provide an output current of 5.0 A with an input
to output voltage differential of approximately 1.0 V. Resistor R in
conjunction with the VBE of the PNP determines when the pass transistor
begins conducting. This circuit is not short circuit proof.
Figure 20. Current Boost Regulator with
Short Circuit Projection
LM2931C
+
2.0 k
100
8.2 k
CM
#345
+
100
100
The circuit of Figure 19 can be modified to provide supply protection against
short circuits by adding the current sense resistor RSC and an additional PNP
transistor. The current sensing PNP must be capable of handling the short
circuit current of the LM2931. Safe operating area of both transistors must be
considered under worst case conditions.
Figure 19. (5.0 A) Low Differential
Voltage Regulator
Input
6.4 V to 30 V
+
100
100
33 k
6.2 V
0
fosc = 2.2 Hz
Figure 21. Constant Intensity Lamp Flasher
http://onsemi.com
9
100
Unstable
Marginally
Stable
1.0
10 mF
22 mF
47 mF
100
mF
0.40
Unstable
0.50
ESR (Ohms)
10
0.60
Vin = 5.6 V
Vout = 5.0 V
IO = 100 mA
Vnrms 10 Hz to 10 MHz
|ZO| @ 40 kHz
TA = 25°C
0.30
Stable
0.20
0.1
Note − Optimum stability uses a 22 mF
output capacitor. Output capacitor values
below 10 mF are not recommended.
0.10
100
1.0 k
|ZO|, MAGNITUDE OF CAPACITOR IMPEDANCE (mW)
0.00
10 k
10
0
50
30
40
60
70
OUTPUT CURRENT (mA)
20
JUNCTION−TO−AIR (° C/W)
R θ JA, THERMAL RESISTANCE
170
3.2
150
2.8
PD(max) for TA = 50°C
130
110
2.4
ÎÎÎ
ÎÎ
ÎÎÎ
ÎÎÎ
ÎÎ
ÎÎÎÎÎ
ÎÎÎ
2.0
Graph represents symmetrical layout
90
L
70
1.6
2.0 oz.
Copper
L
1.2
3.0 mm
50
0.8
RqJA
30
0
10
0.4
20
30
40
50
L, LENGTH OF COPPER (mm)
100
2.4
PD(max) for TA = 50°C
Free Air
Mounted
Vertically
2.0
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
80
Minimum
Size Pad
70
60
2.0 oz. Copper
L
1.6
L
1.2
0.8
50
0.4
RqJA
40
0
0
5.0
10
15
20
25
30
L, LENGTH OF COPPER (mm)
Figure 25. DPAK Thermal Resistance and Maximum
Power Dissipation versus P.C.B. Copper Length
http://onsemi.com
10
PD, MAXIMUM POWER DISSIPATION (W)
Figure 24. SOP−8 Thermal Resistance and Maximum
Power Dissipation versus P.C.B. Copper Length
90
80
90
100
Figure 23. Output Capacitor ESR Stability vs.
Output Load Current
PD, MAXIMUM POWER DISSIPATION (W)
Figure 22. Output Noise Voltage vs.
Output Capacitor Impedance
JUNCTION−TO−AIR (° C/W)
0.01
10
Stable
R θ JA, THERMAL RESISTANCE
Vn , OUTPUT NOISE VOLTAGE (mVrms)
LM2931, NCV2931 Series
3.5
PD(max) for TA = 50°C
JUNCTION−TO−AIR (° C/W)
R θ JA, THERMAL RESISTANCE
80
70
3.0
Free Air
Mounted
Vertically
60
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
ÎÎÎÎ
2.0 oz. Copper
L
Minimum
Size Pad
50
2.5
2.0
L
40
1.5
RqJA
30
1.0
0
5.0
10
15
20
25
PD, MAXIMUM POWER DISSIPATION (W)
LM2931, NCV2931 Series
30
L, LENGTH OF COPPER (mm)
RqJA, THERMAL RESISTANCE,
JUNCTION−TO−AIR (°CW)
300
1.8
PD(max) for TA = 50°C
250
1.6
1.4
ÎÎÎ
ÎÎÎ
ÎÎÎ
2.0 oz. Copper
L
200
150
L
100
50
0
RqJA
0
5.0
10
15
20
25
L, LENGTH OF COPPER (mm)
1.2
1.0
0.8
0.6
0.4
0.2
0.0
30
PD, MAXIMUM POWER DISSIPATION (W)
Figure 26. 3−Pin and 5−Pin D2PAK
Thermal Resistance and Maximum Power
Dissipation versus P.C.B. Copper Length
Figure 27. SOT−223 Thermal Resistance and Maximum
Power Dissipation vs. P.C.B. Copper Length
DEFINITIONS
Dropout Voltage − The input/output voltage differential
at which the regulator output no longer maintains regulation
against further reductions in input voltage. Measured when
the output decreases 100 mV from nominal value at 14 V
input, dropout voltage is affected by junction temperature
and load current.
Line Regulation − The change in output voltage for a
change in the input voltage. The measurement is made under
conditions of low dissipation or by using pulse techniques
such that the average chip temperature is not significantly
affected.
Load Regulation − The change in output voltage for a
change in load current at constant chip temperature.
Maximum Power Dissipation − The maximum total
device dissipation for which the regulator will operate
within specifications.
Bias Current − That part of the input current that is not
delivered to the load.
Output Noise Voltage − The rms AC voltage at the
output, with constant load and no input ripple, measured
over a specified frequency range.
Long−Term Stability − Output voltage stability under
accelerated life test conditions with the maximum rated
voltage listed in the devices electrical characteristics and
maximum power dissipation.
http://onsemi.com
11
LM2931, NCV2931 Series
ORDERING INFORMATION
Output
Device
LM2931AD−5.0
LM2931AD−5.0G
LM2931AD−5.0R2
LM2931AD−5.0R2G
LM2931ADT−5.0
LM2931ADT−5.0G
LM2931ADT−5.0RK
LM2931ADT−5.0RKG
LM2931AD2T−5.0
LM2931AD2T−5.0G
LM2931AD2T−5.0R4
LM2931AD2T−5R4G
LM2931AT−5.0
LM2931AT−5.0G
LM2931AZ−5.0
LM2931AZ−5.0G
LM2931AZ−5.0RA
LM2931AZ−5.0RAG
LM2931AZ−5.0RP
LM2931AZ−5.0RPG
LM2931D−5.0
LM2931D−5.0G
LM2931D−5.0R2
LM2931D−5.0R2G
LM2931D2T−5.0
LM2931D2T−5.0G
LM2931D2T−5.0R4
LM2931D2T−5.0R4G
Voltage
Tolerance
Package
Shipping †
5.0 V
"3.8%
SOIC−8
98 Units / Rail
5.0 V
"3.8%
SOIC−8
(Pb−Free)
98 Units / Rail
5.0 V
"3.8%
SOIC−8
2500 / Tape & Reel
5.0 V
"3.8%
SOIC−8
(Pb−Free)
2500 / Tape & Reel
5.0 V
"3.8%
DPAK
75 Units / Rail
5.0 V
"3.8%
DPAK
(Pb−Free)
75 Units / Rail
5.0 V
"3.8%
DPAK
2500 / VacPk Reel
5.0 V
"3.8%
DPAK
(Pb−Free)
2500 / VacPk Reel
5.0 V
"3.8%
D2PAK
50 Units / Rail
5.0 V
"3.8%
D2PAK
(Pb−Free)
50 Units / Rail
5.0 V
"3.8%
D2PAK
800 / VacPk Reel
5.0 V
"3.8%
D2PAK
(Pb−Free)
800 / VacPk Reel
5.0 V
"3.8%
TO−220
50 Units / Rail
5.0 V
"3.8%
TO−220
(Pb−Free)
50 Units / Rail
5.0 V
"3.8%
TO−92
2000 / Inner Bag
5.0 V
"3.8%
TO−92
(Pb−Free)
2000 / Inner Bag
5.0 V
"3.8%
TO−92
2000 / Tape & Reel
5.0 V
"3.8%
TO−92
(Pb−Free)
2000 / Tape & Reel
5.0 V
"3.8%
TO−92
2000 / Ammo Pack
5.0 V
"3.8%
TO−92
(Pb−Free)
2000 / Ammo Pack
5.0 V
"5.0%
SOIC−8
98 Units / Rail
5.0 V
"5.0%
SOIC−8
(Pb−Free)
98 Units / Rail
5.0 V
"5.0%
SOIC−8
2500 / Tape & Reel
5.0 V
"5.0%
SOIC−8
(Pb−Free)
2500 / Tape & Reel
5.0 V
"5.0%
D2PAK
50 Units / Rail
D2PAK
50 Units / Rail
5.0 V
"5.0%
(Pb−Free)
5.0 V
"5.0%
D2PAK
800 / VacPk Reel
D2PAK
800 / VacPk Reel
5.0 V
"5.0%
(Pb−Free)
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
*NCV2931: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring
site and change control.
http://onsemi.com
12
LM2931, NCV2931 Series
ORDERING INFORMATION
Output
Device
LM2931DT−5.0
LM2931DT−5.0G
LM2931T−5.0
LM2931T−5.0G
LM2931Z−5.0
LM2931Z−5.0G
LM2931Z−5.0RA
LM2931Z−5.0RAG
LM2931Z−5.0RP
LM2931Z−5.0RPG
LM2931CD
LM2931CDG
LM2931CDR2
LM2931CDR2G
LM2931CD2T
LM2931CD2TG
LM2931CD2TR4
LM2931CD2TR4G
LM2931CT
LM2931CTG
LM2931ACD
LM2931ACDG
LM2931ACDR2
LM2931ACDR2G
LM2931ACD2TR4
LM2931ACD2TR4G
LM2931ACTV
LM2931ACTVG
Voltage
Tolerance
Package
Shipping †
5.0 V
"5.0%
DPAK
75 Units / Rail
5.0 V
"5.0%
DPAK
(Pb−Free)
75 Units / Rail
5.0 V
"5.0%
TO−220
50 Units / Rail
5.0 V
"5.0%
TO−220
(Pb−Free)
50 Units / Rail
5.0 V
"5.0%
TO−92
2000 / Inner Bag
5.0 V
"5.0%
TO−92
(Pb−Free)
2000 / Inner Bag
5.0 V
"5.0%
TO−92
2000 / Tape & Reel
5.0 V
"5.0%
TO−92
(Pb−Free)
2000 / Tape & Reel
5.0 V
"5.0%
TO−92
2000 / Ammo Pack
5.0 V
"5.0%
TO−92
(Pb−Free)
2000 / Ammo Pack
Adjustable
"5.0%
SOIC−8
98 Units / Rail
Adjustable
"5.0%
SOIC−8
(Pb−Free)
98 Units / Rail
Adjustable
"5.0%
SOIC−8
2500 / Tape & Reel
Adjustable
"5.0%
SOIC−8
(Pb−Free)
2500 / Tape & Reel
Adjustable
"5.0%
D2PAK
50 Units / Rail
Adjustable
"5.0%
D2PAK
(Pb−Free)
50 Units / Rail
Adjustable
"5.0%
D2PAK
800 / VacPk Reel
Adjustable
"5.0%
D2PAK
(Pb−Free)
800 / VacPk Reel
Adjustable
"5.0%
TO−220
50 Units / Rail
Adjustable
"5.0%
TO−220
(Pb−Free)
50 Units / Rail
Adjustable
"2.0%
SOIC−8
98 Units / Rail
Adjustable
"2.0%
SOIC−8
(Pb−Free)
98 Units / Rail
Adjustable
"2.0%
SOIC−8
2500 / Tape & Reel
Adjustable
"2.0%
SOIC−8
(Pb−Free)
2500 / Tape & Reel
Adjustable
"2.0%
D2PAK
800 / VacPk Reel
D2PAK
800 / VacPk Reel
Adjustable
"2.0%
(Pb−Free)
Adjustable
"2.0%
TO−220
50 Units / Rail
Adjustable
"2.0%
TO−220
(Pb−Free)
50 Units / Rail
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
*NCV2931: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring
site and change control.
http://onsemi.com
13
LM2931, NCV2931 Series
ORDERING INFORMATION
Output
Device
NCV2931ACDR2*
NCV2931ACDRG*
NCV2931AD−5.0R2*
NCV2931AD−5.0R2G*
NCV2931AST−5.0T3*
NCV2931AST−5.0T3G*
NCV2931CDR2*
NCV2931CDR2G*
NCV2931D−5.0R2*
NCV2931D−5.0R2G*
NCV2931DT−5.0RK*
NCV2931DT−5.0RKG*
NCV2931D2T−5.0R4*
NCV2931D2T5.0R4G*
Voltage
Tolerance
Package
Shipping †
Adjustable
"2.5%
SOIC−8
2500 / Tape & Reel
Adjustable
"2.5%
SOIC−8
(Pb−Free)
2500 / Tape & Reel
5.0 V
"3.8%
SOIC−8
2500 / Tape & Reel
5.0 V
"3.8%
SOIC−8
(Pb−Free)
2500 / Tape & Reel
5.0 V
"3.8%
SOT−223
4000 / Tape & Reel
5.0 V
"3.8%
SOT−223
(Pb−Free)
4000 / Tape & Reel
Adjustable
"5.0%
SOIC−8
2500 / Tape & Reel
Adjustable
"5.0%
SOIC−8
(Pb−Free)
2500 / Tape & Reel
5.0 V
"5.0%
SOIC−8
2500 / Tape & Reel
5.0 V
"5.0%
SOIC−8
(Pb−Free)
2500 / Tape & Reel
5.0 V
"5.0%
DPAK
2500 / Tape & Reel
5.0 V
"5.0%
DPAK
(Pb−Free)
2500 / Tape & Reel
5.0 V
"5.0%
D2PAK
800 / VacPk Reel
5.0 V
"5.0%
D2PAK
(Pb−Free)
800 / VacPk Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.
*NCV2931: Tlow = −40°C, Thigh = +125°C. Guaranteed by design. NCV prefix is for automotive and other applications requiring
site and change control.
http://onsemi.com
14
LM2931, NCV2931 Series
MARKING DIAGRAMS
DPAK
DT SUFFIX
CASE 369A
DPAK
DT SUFFIX
CASE 369A
931A5G
ALYWW
2931G
ALYWW
D2PAK
D2T SUFFIX
CASE 936
D2PAK
D2T SUFFIX
CASE 936
D2PAK
D2T SUFFIX
CASE 936
LM
2931AD2T−5
AWLYWWG
LM
2931AD2T−5.0
AWLYWWG
LM
2931D2T−5
AWLYWWG
*
*
Heatsink surface (shown as terminal 4 in case outline drawing) is connected to Pin 2.
TO−220
T SUFFIX
CASE 221A
TO−220
T SUFFIX
CASE 221A
TO−220
T SUFFIX
CASE 314D
LM
2931AT−5
AWLYWWG
LM
2931T−5.0
AWLYWWG
LM
2931ACTV
AWLYWWG
Heatsink surface connected to Pin 2.
SOIC−8
D SUFFIX
CASE 751
Heatsink surface
connected to Pin 3.
SOIC−8
D SUFFIX
CASE 751
8
SOIC−8
D SUFFIX
CASE 751
8
8
2931A
ALYW
G
2931A
ALYW5
G
1
1
*
D2PAK
D2T SUFFIX
CASE 936A
D2PAK
D2T SUFFIX
CASE 936A
LM
2931ACD2T
AWLYWWG
LM
2931CT
AWLYWWG
Heatsink surface (shown as terminal 6 in
case outline drawing) is connected to Pin 3.
SOIC−8
D SUFFIX
CASE 751
TO−92
Z SUFFIX
CASE 029
TO−92
Z SUFFIX
CASE 029
2931
ALYW5
G
2931A
Z−5.0
ALYWG
G
2931Z
−5.0
ALYWG
G
8
2931C
ALYW
G
*
1
1
SOT−223
ST SUFFIX
CASE 318H
*
ALYW
2931AG
G
1
2
3
A
WL, L
YY, Y
WW, W
G or G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Device
*This marking diagram also applies to NCV2931.
http://onsemi.com
15
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
TO−92 (TO−226)
CASE 29−11
ISSUE AM
1
12
3
STRAIGHT LEAD
BULK PACK
2
3
BENT LEAD
TAPE & REEL
AMMO PACK
A
B
STRAIGHT LEAD
BULK PACK
R
P
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
L
SEATING
PLANE
K
D
X X
G
J
H
V
C
SECTION X−X
1
N
DIM
A
B
C
D
G
H
J
K
L
N
P
R
V
INCHES
MIN
MAX
0.175
0.205
0.170
0.210
0.125
0.165
0.016
0.021
0.045
0.055
0.095
0.105
0.015
0.020
0.500
−−−
0.250
−−−
0.080
0.105
−−− 0.100
0.115
−−−
0.135
−−−
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.407
0.533
1.15
1.39
2.42
2.66
0.39
0.50
12.70
−−−
6.35
−−−
2.04
2.66
−−−
2.54
2.93
−−−
3.43
−−−
N
A
R
BENT LEAD
TAPE & REEL
AMMO PACK
B
P
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. CONTOUR OF PACKAGE BEYOND
DIMENSION R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P
AND BEYOND DIMENSION K MINIMUM.
T
SEATING
PLANE
K
D
X X
G
J
V
1
C
SECTION X−X
N
http://onsemi.com
16
DIM
A
B
C
D
G
J
K
N
P
R
V
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.40
0.54
2.40
2.80
0.39
0.50
12.70
−−−
2.04
2.66
1.50
4.00
2.93
−−−
3.43
−−−
LM2931, NCV2931 Series
TO−220, SINGLE GAUGE
T SUFFIX
CASE 221AB−01
ISSUE O
−T−
B
SEATING
PLANE
C
F
T
S
4
DIM
A
B
C
D
F
G
H
J
K
L
N
Q
R
S
T
U
V
Z
A
Q
1 2 3
U
H
K
Z
L
R
V
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION Z DEFINES A ZONE WHERE ALL
BODY AND LEAD IRREGULARITIES ARE
ALLOWED.
J
G
D
N
http://onsemi.com
17
INCHES
MIN
MAX
0.570
0.620
0.380
0.405
0.160
0.190
0.025
0.035
0.142
0.147
0.095
0.105
0.110
0.155
0.018
0.025
0.500
0.562
0.045
0.060
0.190
0.210
0.100
0.120
0.080
0.110
0.020
0.055
0.235
0.255
0.000
0.050
0.045
−−−
−−− 0.080
MILLIMETERS
MIN
MAX
14.48
15.75
9.66
10.28
4.07
4.82
0.64
0.88
3.61
3.73
2.42
2.66
2.80
3.93
0.46
0.64
12.70
14.27
1.15
1.52
4.83
5.33
2.54
3.04
2.04
2.79
0.508
1.39
5.97
6.47
0.00
1.27
1.15
−−−
−−−
2.04
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
TO−220
TH SUFFIX
CASE 314A−03
ISSUE E
B
−P−
Q
−T−
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION D DOES NOT INCLUDE
INTERCONNECT BAR (DAMBAR) PROTRUSION.
DIMENSION D INCLUDING PROTRUSION SHALL
NOT EXCEED 0.043 (1.092) MAXIMUM.
SEATING
PLANE
C
OPTIONAL
CHAMFER
A
U
E
F
L
K
G
5X
D
0.014 (0.356)
M
T P
5X
M
J
S
DIM
A
B
C
D
E
F
G
J
K
L
Q
S
U
INCHES
MIN
MAX
0.572
0.613
0.390
0.415
0.170
0.180
0.025
0.038
0.048
0.055
0.570
0.585
0.067 BSC
0.015
0.025
0.730
0.745
0.320
0.365
0.140
0.153
0.210
0.260
0.468
0.505
MILLIMETERS
MIN
MAX
14.529 15.570
9.906 10.541
4.318
4.572
0.635
0.965
1.219
1.397
14.478 14.859
1.702 BSC
0.381
0.635
18.542 18.923
8.128
9.271
3.556
3.886
5.334
6.604
11.888 12.827
TO−220
TV SUFFIX
CASE 314B−05
ISSUE J
Q
OPTIONAL
CHAMFER
E
A
U
K
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION D DOES NOT INCLUDE
INTERCONNECT BAR (DAMBAR) PROTRUSION.
DIMENSION D INCLUDING PROTRUSION SHALL
NOT EXCEED 0.043 (1.092) MAXIMUM.
C
B
−P−
S
L
W
V
F
5X
G
5X
0.24 (0.610)
M
J
T
H
D
0.10 (0.254)
M
T P
M
N
−T−
http://onsemi.com
18
SEATING
PLANE
DIM
A
B
C
D
E
F
G
H
J
K
L
N
Q
S
U
V
W
INCHES
MIN
MAX
0.572
0.613
0.390
0.415
0.170
0.180
0.025
0.038
0.048
0.055
0.850
0.935
0.067 BSC
0.166 BSC
0.015
0.025
0.900
1.100
0.320
0.365
0.320 BSC
0.140
0.153
−−− 0.620
0.468
0.505
−−− 0.735
0.090
0.110
MILLIMETERS
MIN
MAX
14.529 15.570
9.906 10.541
4.318
4.572
0.635
0.965
1.219
1.397
21.590 23.749
1.702 BSC
4.216 BSC
0.381
0.635
22.860 27.940
8.128
9.271
8.128 BSC
3.556
3.886
−−− 15.748
11.888 12.827
−−− 18.669
2.286
2.794
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
TO−220
T SUFFIX
CASE 314D−04
ISSUE E
−Q−
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION D DOES NOT INCLUDE
INTERCONNECT BAR (DAMBAR) PROTRUSION.
DIMENSION D INCLUDING PROTRUSION SHALL
NOT EXCEED 10.92 (0.043) MAXIMUM.
SEATING
PLANE
−T−
B
C
E
A
U
1234 5
K
DIM
A
B
C
D
E
G
H
J
K
L
Q
U
L
G
D
5 PL
0.356 (0.014)
T Q
M
J
H
M
INCHES
MIN
MAX
0.572
0.613
0.390
0.415
0.170
0.180
0.025
0.038
0.048
0.055
0.067 BSC
0.087
0.112
0.015
0.025
0.990
1.045
0.320
0.365
0.140
0.153
0.105
0.117
MILLIMETERS
MIN
MAX
14.529 15.570
9.906 10.541
4.318
4.572
0.635
0.965
1.219
1.397
1.702 BSC
2.210
2.845
0.381
0.635
25.146 26.543
8.128
9.271
3.556
3.886
2.667
2.972
SOT−223
ST SUFFIX
CASE 318H−01
ISSUE O
H
E
M
C B
S
C
3
e1
b
D
2
S
e
A
M
A
0.1
B
M
C A
S
B
0.1
4
b2
1
S
A
E1
A1
A
B
ÇÇÇÇÇÇÇ
ÉÉÉÉÉÉÉ
ÉÉÉÉÉÉÉ
ÇÇÇÇÇÇÇ
ÇÇÇ
ÉÉÉ
ÉÉÉ
ÇÇÇ
(b)
(b2)
T
c
c1
b1
b3
SECTION B−B
C A
B
B
S
0.2
0.08
L
SECTION A−A
http://onsemi.com
19
NOTES:
1. DIMENSIONS ARE IN MILLIMETERS.
2. INTERPRET DIMENSIONS AND TOLERANCES
PER ASME Y14.5M, 1994.
3. DIMENSION E1 DOES NOT INCLUDE INTERLEAD
FLASH OR PROTRUSION. INTERLEAD FLASH OR
PROTRUSION SHALL NOT EXCEED 0.23 PER
SIDE.
4. DIMENSIONS b AND b2 DO NOT INCLUDE
DAMBAR PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.08 TOTAL IN EXCESS
OF THE b AND b2 DIMENSIONS AT MAXIMUM
MATERIAL CONDITION.
5. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
6. DIMENSIONS D AND E1 ARE TO BE DETERMINED
AT DATUM PLANE H.
DIM
A
A1
b
b1
b2
b3
c
c1
D
E
E1
e
e1
L
T
MILLIMETERS
MIN
MAX
−−−
1.80
0.02
0.11
0.60
0.88
0.60
0.80
2.90
3.10
2.90
3.05
0.24
0.35
0.24
0.30
6.30
6.70
6.70
7.30
3.30
3.70
2.30
4.60
−−−
0.25
0_
10_
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
DPAK
DT SUFFIX
CASE 369A−13
ISSUE AB
−T−
C
B
V
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
SEATING
PLANE
E
R
4
Z
A
S
1
2
3
U
K
F
J
L
H
D
G
2 PL
0.13 (0.005)
M
T
http://onsemi.com
20
DIM
A
B
C
D
E
F
G
H
J
K
L
R
S
U
V
Z
INCHES
MIN
MAX
0.235
0.250
0.250
0.265
0.086
0.094
0.027
0.035
0.033
0.040
0.037
0.047
0.180 BSC
0.034
0.040
0.018
0.023
0.102
0.114
0.090 BSC
0.175
0.215
0.020
0.050
0.020
−−−
0.030
0.050
0.138
−−−
MILLIMETERS
MIN
MAX
5.97
6.35
6.35
6.73
2.19
2.38
0.69
0.88
0.84
1.01
0.94
1.19
4.58 BSC
0.87
1.01
0.46
0.58
2.60
2.89
2.29 BSC
4.45
5.46
0.51
1.27
0.51
−−−
0.77
1.27
3.51
−−−
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
SOIC−8 NB
CASE 751−07
ISSUE AH
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A AND B DO NOT INCLUDE
MOLD PROTRUSION.
4. MAXIMUM MOLD PROTRUSION 0.15 (0.006)
PER SIDE.
5. DIMENSION D DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.127 (0.005) TOTAL
IN EXCESS OF THE D DIMENSION AT
MAXIMUM MATERIAL CONDITION.
6. 751−01 THRU 751−06 ARE OBSOLETE. NEW
STANDARD IS 751−07.
−X−
A
8
5
S
B
1
0.25 (0.010)
M
Y
M
4
K
−Y−
G
C
N
DIM
A
B
C
D
G
H
J
K
M
N
S
X 45 _
SEATING
PLANE
−Z−
0.10 (0.004)
H
D
0.25 (0.010)
M
Z Y
S
X
M
J
S
SOLDERING FOOTPRINT*
1.52
0.060
7.0
0.275
4.0
0.155
0.6
0.024
1.270
0.050
SCALE 6:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
21
MILLIMETERS
MIN
MAX
4.80
5.00
3.80
4.00
1.35
1.75
0.33
0.51
1.27 BSC
0.10
0.25
0.19
0.25
0.40
1.27
0_
8 _
0.25
0.50
5.80
6.20
INCHES
MIN
MAX
0.189
0.197
0.150
0.157
0.053
0.069
0.013
0.020
0.050 BSC
0.004
0.010
0.007
0.010
0.016
0.050
0 _
8 _
0.010
0.020
0.228
0.244
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
D2PAK
D2T SUFFIX
CASE 936−03
ISSUE B
K
−T−
A
OPTIONAL
CHAMFER
TERMINAL 4
E
U
S
B
F
J
D
0.010 (0.254) M T
1
2
3
H
V
M
G
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. TAB CONTOUR OPTIONAL WITHIN DIMENSIONS
A AND K.
4. DIMENSIONS U AND V ESTABLISH A MINIMUM
MOUNTING SURFACE FOR TERMINAL 4.
5. DIMENSIONS A AND B DO NOT INCLUDE MOLD
FLASH OR GATE PROTRUSIONS. MOLD FLASH
AND GATE PROTRUSIONS NOT TO EXCEED
0.025 (0.635) MAXIMUM.
DIM
A
B
C
D
E
F
G
H
J
K
L
M
N
P
R
S
U
V
L
P
N
R
C
SOLDERING FOOTPRINT*
8.38
0.33
1.016
0.04
10.66
0.42
5.08
0.20
3.05
0.12
17.02
0.67
SCALE 3:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
22
INCHES
MIN
MAX
0.386
0.403
0.356
0.368
0.170
0.180
0.026
0.036
0.045
0.055
0.051 REF
0.100 BSC
0.539
0.579
0.125 MAX
0.050 REF
0.000
0.010
0.088
0.102
0.018
0.026
0.058
0.078
5 _ REF
0.116 REF
0.200 MIN
0.250 MIN
MILLIMETERS
MIN
MAX
9.804 10.236
9.042
9.347
4.318
4.572
0.660
0.914
1.143
1.397
1.295 REF
2.540 BSC
13.691 14.707
3.175 MAX
1.270 REF
0.000
0.254
2.235
2.591
0.457
0.660
1.473
1.981
5 _ REF
2.946 REF
5.080 MIN
6.350 MIN
LM2931, NCV2931 Series
PACKAGE DIMENSIONS
D2PAK
D2T SUFFIX
CASE 936A−02
ISSUE C
−T−
OPTIONAL
CHAMFER
A
U
V
H
1 2 3 4 5
M
D
0.010 (0.254)
TERMINAL 6
E
S
K
B
M
T
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. TAB CONTOUR OPTIONAL WITHIN DIMENSIONS A
AND K.
4. DIMENSIONS U AND V ESTABLISH A MINIMUM
MOUNTING SURFACE FOR TERMINAL 6.
5. DIMENSIONS A AND B DO NOT INCLUDE MOLD
FLASH OR GATE PROTRUSIONS. MOLD FLASH
AND GATE PROTRUSIONS NOT TO EXCEED 0.025
(0.635) MAXIMUM.
L
P
N
G
INCHES
MIN
MAX
0.386
0.403
0.356
0.368
0.170
0.180
0.026
0.036
0.045
0.055
0.067 BSC
0.539
0.579
0.050 REF
0.000
0.010
0.088
0.102
0.018
0.026
0.058
0.078
5 _ REF
0.116 REF
0.200 MIN
0.250 MIN
DIM
A
B
C
D
E
G
H
K
L
M
N
P
R
S
U
V
R
C
SOLDERING FOOTPRINT*
MILLIMETERS
MIN
MAX
9.804
10.236
9.042
9.347
4.318
4.572
0.660
0.914
1.143
1.397
1.702 BSC
13.691
14.707
1.270 REF
0.000
0.254
2.235
2.591
0.457
0.660
1.473
1.981
5 _ REF
2.946 REF
5.080 MIN
6.350 MIN
8.38
0.33
1.702
0.067
10.66
0.42
3.05
0.12
16.02
0.63
SCALE 3:1
1.016
0.04
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
23
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
LM2931/D