LCA120L Single Pole OptoMOS® Relay Load Voltage Load Current Max RON LCA120L 250 150 20 Description LCA120 is a 250V, 150mA, 20Ω 1-Form-A relay. It features enhanced peak load current capability. Current limiting version is available. (“L” suffix) Units V mA Ω Features • Small 6 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Current Limiting Surface Mount and Tape & Reel Versions Available Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified to: • BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 • BS EN 41003:1993 Certificate #: 7344 Ordering Information Part # LBA120L LBA120LS LBA120LSTR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration LCA120 Pinout AC/DC Configuration + Control – Control Do Not Use 1 6 2 5 3 4 Load Do Not Use Load LCA120 Pinout DC Only Configuration + Control – Control Do Not Use 1 6 2 5 3 4 + Load – Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% TON DS-LCA120L-R9 www.clare.com 10%+ TOFF 1 LCA120L Absolute Maximum Ratings (@ 25˚ C) Parameter Min Input Power Dissipation - - 1501 mW Input Control Current Peak (10ms) - - 50 1 mA A Reverse Input Voltage - - 5 V Total Power Dissipation - - 8002 mW 3750 - - VRMS Operational Temperature -40 - +85 °C Storage Temperature -40 - +125 °C - - +260 +220 °C °C Isolation Voltage Input to Output Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 Derate Linearly 1.33 mw/˚C 2 Derate Linearly 6.67 mw/˚C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Typ Max Units Electrical Characteristics Parameter Conditions Symbol Min Typ Max Units Load Voltage (Peak) - VL - - 250 V Load Current (Continuous) AC/DC Configuration DC Configuration - IL IL - - 150 200 mA mA 10ms ILPK - - - mA IL=Load Current IL=Load Current RON - 15 5 20 6 Ω Ω VL=25OV ILEAK - - 1 µA Switching Speeds Turn-On Turn-Off IF=5mA, VL=10V IF =5mA, VL=10V TON TOFF - - 3 3 ms ms Output Capacitance 50V; f=1MHz COUT - 50 - pF ICL 190 235 280 mA Output Characteristics @ 25°C Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Load Current Limiting Input Characteristics @ 25°C Input Control Current IL=Load Current IF 5 - 50 mA Input Dropout Current - IF 0.4 0.7 - mA Input Voltage Drop 2 IF=5mA VF 0.9 1.2 1.4 V Reverse Input Voltage - VR - - 5 V Reverse Input Current VR=5V IR - - 10 µA Input to Output Capacitance - CI/O - 3 - pF Input to Output Isolation - VI/O 3750 - - VRMS www.clare.com Rev. 9 LCA120L PERFORMANCE DATA* LCA120L Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC) Device Count (N) Device Count (N) 30 25 20 15 10 35 35 30 30 25 20 15 10 5 5 0 0 1.17 1.19 1.21 1.23 LCA120L Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Device Count (N) 35 LCA120L Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC 14.0 14.4 14.8 15.2 380 15.6 LCA120L Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC) 25 20 15 10 25 30 20 25 15 10 5 0 0.3 0.5 0.7 LED Current (mA) LCA120L Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC; IF = 5mADC) 35 Load Current (mA) Device Count (N) 30 25 20 15 10 0.9 1.1 1.3 0.14 0.18 0.22 0.26 0.18 200 0.16 150 20mA 10mA 5mA 100 50 Turn-On (ms) Blocking Voltage (VRMS) 395 390 385 380 -20 0 20 40 60 80 100 20 40 -40 -20 0 60 Temperature (°C) 80 100 20 40 60 80 100 Temperature (°C) LCA120L Typical Turn-Off vs. Temperature (Load Current = 170mADC) 0.30 5mA 0.4 10mA 0.3 20mA 0.2 0.25 0.20 0.15 0.10 0.05 0 0 0.10 0.06 120 0.1 375 0.77 0.12 LCA120L Typical Turn-On vs. Temperature (Load Current = 170mADC) 0.5 0.68 0.14 Temperature (°C) 0.6 0.59 0.08 -40 400 0.50 LCA120L Typical Leakage vs. Temperature (Measured across Pins 4 & 6) LCA120L Typical Blocking Voltage vs. Temperature -20 0.41 LCA120L Typical Load Current vs. Temperature 250 0.30 0.32 Turn-On (ms) Turn-Off (ms) -40 10 0.23 Turn-Off (ms) 0.10 15 LED Current (mA) 0 0.06 400 20 1.5 5 0 396 0 1.8 Leakage (µA) 1.6 392 5 5 0 388 LCA120L Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC; IF = 5mADC) Device Count (N) Device Count (N) Device Count (N) 30 1.4 384 Blocking Voltage (V) 35 1.2 10 On-Resistance (Ω) 40 1.0 15 0 1.25 LCA120L Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC) 0.8 20 5 LED Forward Voltage Drop (V) 0.6 25 5mA 0 -40 -20 0 20 40 60 Temperature (°C) 80 100 -40 -20 0 20 40 60 80 100 Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 9 www.clare.com 3 LCA120L PERFORMANCE DATA* 0.40 0.160 1.6 0.35 0.150 1.4 50mA 30mA 20mA 10mA 5mA 1.2 1.0 0.30 0.25 0.20 0 20 40 60 80 100 0 2 4 Temperature (°C) 2.500 40 30 20 14 16 18 0 20 0 80 -20 0 20 40 60 LCA120L Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC LCA120L Energy Rating Curve 200 80 0 -50 -100 0.5 1.0 1.5 2.0 2.5 Load Voltage (V) 16 20 18 1.500 1.000 -20 0 20 40 60 80 100 Temperature (°C) LCA120L Typical Current Limiting vs. Temperature IF = 2mADC 300.00 250.00 0.8 0.6 0.4 200.00 150.00 100.00 50.00 0.2 -150 14 2.000 -40 Current (mA) Load Current (A) 50 12 0 100 1.0 100 10 LCA120L Typical IF for Switch Dropout vs. Temperature (Load Current = 170mADC) 1.2 150 8 0.500 -40 100 6 2.500 Temperature (°C) 0 4 3.000 Temperature (°C) -200 -2.5 -2.0 -1.5 -1.0 -0.5 2 LED Forward Current (mA) 1.000 0 60 12 1.500 0.500 40 10 2.000 10 20 8 LED Current (mA) 50 LED Current (mA) On-Resistance (Ω) 3.000 0 6 LCA120L Typical IF for Switch Operation vs. Temperature (Load Current = 170mADC) 60 -20 0.120 Forward Current (mA) LCA120L Typical On-Resistance vs. Temperature (Load Current = 170mADC; IF = 5mA) -40 0.130 0.100 0.10 120 0.140 0.110 0.15 0.8 -20 Turn-Off (ms) 1.8 -40 Load Current (mA) LCA120L Typical Turn-Off vs. LED Forward Current (Load Current = 170mADC) LCA120L Typical Turn-On vs. LED Forward Current (Load Current = 170mADC) Turn-On (ms) LED Forward Voltage Drop (V) LCA120L Typical LED Forward Voltage Drop vs. Temperature 0 10µs 100µs 1ms 10ms 100ms 0 1s Time 10s 100s -40 -20 0 20 40 60 80 100 Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 9 LCA120L MECHANICAL DIMENSIONS 6 Pin Power DIP Through Hole (Standard) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 6-.800 DIA. (6-.031 DIA.) 7.620 ± .127 (.300 ± .005) 6.350 ± .127 (.250 ± .005) 5.080 ± .127 (.200 ± .005) 6 Pin Power DIP Surface Mount (“S” Suffix) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 8.305 ± .127 (.327 ± .005) 1.905 ± .127 (.075 ± .005) 1.499 ± .127 (.059 ± .005) Tape and Reel Packaging for 6 Pin Power DIP Surface Mount Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 – .102 (.265) (.069 – .004) .406 MAX. (.016) 2.007 – .102 1.498 – .102 3.987 – .102 (.079 – .004) (.059 – .004) (.157 – .004) 7.493 – .102 (.295 – .004) 1 6 12.090 (.476) 10.300 (.405) 4.877 (.192) Top Cover Tape Embossed Carrier Embossment 16.002 – .305 (.630 – .012) .050R TYP. 11.989 – .102 (.472 – .004) 10.300 – .102 (.405 – .004) 1.549 – .102 (.061 – .004) User Direction of Feed Dimensions mm (inches) Rev. 9 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS EUROPE ASIA/PACIFIC Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 Clare Switch Division 4315 N. Earth City Expressway Earth City, MO 63045 Tel: 1-314-770-1832 Fax: 1-314-770-1812 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare 603 Apache Court Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 http://www.clare.com Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LCA120L-R9 ©Copyright 2001, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 7/17/01