Click on Series name for product info on aimtec.com Series AM2DS-Z 2 Watt | DC-DC Converter To be added soon FEATURES: • RoHS compliant SIP7 package • High efficiency up to 80% • I/O Isolation 5200 VDC • • • Low Ripple and Noise Continuous Short Circuit Protection Low coupling capacity Models Single output Model AM2DS-0503SH52Z AM2DS-0505SH52Z AM2DS-0509SH52Z AM2DS-0512SH52Z AM2DS-0515SH52Z AM2DS-1203SH52Z AM2DS-1205SH52Z AM2DS-1209SH52Z AM2DS-1212SH52Z AM2DS-1215SH52Z AM2DS-1503SH52Z AM2DS-1505SH52Z AM2DS-1509SH52Z AM2DS-1512SH52Z AM2DS-1515SH52Z AM2DS-2403SH52Z AM2DS-2405SH52Z AM2DS-2409SH52Z AM2DS-2412SH52Z AM2DS-2415SH52Z Input Voltage (V) Output Voltage (V) Output Current Max (mA) Max Capacitive Load (uF) Efficiency (%) 5 5 5 5 5 12 12 12 12 12 15 15 15 15 15 24 24 24 24 24 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 3.3 5 9 12 15 500 400 222 167 133 500 400 222 167 133 500 400 222 167 133 500 400 222 167 133 1000 470 470 220 220 1000 470 470 220 220 1000 470 470 220 220 1000 470 470 220 220 70 70 75 77 78 71 71 76 78 79 70 70 75 75 79 70 70 75 78 80 Models Dual output Model AM2DS-0505DH52Z AM2DS-0509DH52Z AM2DS-0512DH52Z AM2DS-0515DH52Z AM2DS-051509DH52Z AM2DS-1205DH52Z AM2DS-1209DH52Z AM2DS-1212DH52Z AM2DS-1215DH52Z AM2DS-121509DH52Z AM2DS-1505DH52Z AM2DS-1509DH52Z AM2DS-1512DH52Z AM2DS-1515DH52Z AM2DS-151509DH52Z AM2DS-2405DH52Z AM2DS-2409DH52Z AM2DS-2412DH52Z AM2DS-2415DH52Z AM2DS-241509DH52Z www.aimtec.com F 051e R6 Input Voltage (V) Output Voltage (V) Output Current max (mA) Max Capacitive Load (uF) Efficiency (%) 5 5 5 5 5 12 12 12 12 12 15 15 15 15 15 24 24 24 24 24 ±5 ±9 ±12 ±15 +15/-9 ±5 ±9 ±12 ±15 +15/-9 ±5 ±9 ±12 ±15 +15/-9 ±5 ±9 ±12 ±15 +15/-9 ±200 ±111 ±83 ±67 +67/-111 ±200 ±111 ±83 ±67 +67/-111 ±200 ±111 ±83 ±67 +67/-111 ±200 ±111 ±83 ±67 +67/-111 ±220 ±220 ±100 ±100 +100/-220 ±220 ±220 ±100 ±100 +100/-220 ±220 ±220 ±100 ±100 +100/-220 ±220 ±220 ±100 ±100 +100/-220 71 75 77 78 76 72 76 78 79 77 71 75 78 79 76 71 75 77 78 75 Tel: +1 514 620 2722 1 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2DS-Z 2 Watt | DC-DC Converter Input Specifications Parameters Voltage range Filter Startup time Absolute Maximum Rating (1sec max) Quiescent Current Input Reflected Ripple current Nominal Typical Maximum 5 12 15 24 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Capacitor Vnom, constant resistive load 20 5 Vin 12 Vin 15 Vin 24 Vin 5 Vin 40 12 Vin 25 15 Vin 20 24 Vin 15 See the suggested circuit 20 Units VDC ms 0-9 0-18 0-20 0-30 VDC mA mA p-p Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical Rated Units 5200 VDC MOhm pF Maximum Units 60 sec >1000 10 Output Specifications Parameters Voltage accuracy Short Circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Ripple and Noise* Conditions Typical ±5 Continuous Auto recovery ±1.2 ±10 ±0.03 For 1% change of V in From 20 to 100% load % 100 % % o %/ C mV p-p Maximum Units 20MHz Bandwidth *Output ripple and noise are measured with external connection of 10uF electrolytic capacitor and 1uF ceramic capacitor. General Specifications Parameters Switching frequency Operating temperature Storage temperature Maximum case temperature Cooling Humidity Case material Soldering temperature Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load, depending of the model With derating above 65°C 50 - 100 KHz o C o C o C -40 to +85 -55 to +125 95 Free air convection 95 Non-conductive black plastic, epoxy encapsulated (UL94V-0 rated) 1.5mm from case for 10 sec. 260 2.5 0.77 x 0.39 x 0.28 inches 19.5 x 10.0 x 7.2 mm o >2 390 000 hrs (MIL-HDBK-217 F at +25 C) % RH o C g NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Standards www.aimtec.com F 051e R6 Designed to meet IEC/EN 60950-1, EN 55022, Class B, with external filter & EN 55024: 2010 IEC 61000-4-2, Criteria A IEC 61000-4-3, Criteria A IEC 61000-4-4, Criteria A, with external filter IEC 61000-4-6, Criteria A IEC 61000-4-8, Criteria A Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2DS-Z 2 Watt | DC-DC Converter Pin Out Specifications Pin Dimensions 5200 VDC Single + V Input - V Input - V Output No pin + V Output 19.50 (0.76) Dual + V Input - V Input - V Output Common + V Output 7.20 (0.28) PRINTED FACE 10.00 (0.39) 9.50 (0.37) 0.50 (0.02) 1 2 5 6 7 3.05 (0.12) 2.54 (0.10) 15.20 (0.60) 0.50 (0.02) 7.20 (0.28) 0.50 (0.02) NOTE: Unit:mm [inch] Pin Diameter: 0.50 ± 0.05mm [0.02 ± 0.002 inch] Pin Pitch tolerance: ±0.35mm [ ±0.014 inch] Case tolerance: ±0.50mm [ ±0.02 inch] 0.25 (0.01) 1.25 (0.05) Input Reflected Ripple Current Test Circuit L1 (12 µh) Vin+ Test Point + C1 (47 µf) Vin- - Vo+ Aimtec DC-DC Converter RL (Full Load) Vo- * Tested at full load, and nominal input EMI Filter Circuit recommendation L1 + C2 C1 Vin- - Vo+ Aimtec DC-DC Converter Load Vin+ Vo- C3 Vin C1 5, 12, 15 V 470 µF / 100V 24 V 470 µF / 100V * Electrolytic type L1 C2 C3 18 µH 18 µH 2.2 µF / 100V 470 pF / 2kV NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6 Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only