CMR60 Series • Ratings from 35A to 65A @ 660 VAC • 45mm (width) package • SCR output for heavy industrial loads • LED input status indicator • AC or DC control • Zero-crossing (resistive loads) or random-fire (inductive loads) output PRODUCT SELECTION Description 4-32 VDC Control 35 A 45 A 55 A 65 A CMRD6035 CMRD6045 CMRD6055 CMRD6065 90-140 VAC Control CMRA6035 CMRA6045 CMRA6055 CMRA6065 18-36 VAC Control CMRA6035E CMRA6045E CMRA6055E CMRA6065E AVAILABLE OPTIONS OUTPUT SPECIFICATIONS (1) Description Operating Voltage (47-63Hz) [Vrms] Transient Overvoltage [Vpk] 35A 45A 55A 65A 48-660 48-660 48-660 48-660 1200 1200 1200 1200 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 1.0 1.0 1.0 1.0 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (2) 500 500 500 500 Maximum Load Current [Arms] 35 45 55 65 Minimum Load Current [Arms] 0.15 0.15 0.25 0.25 239/250 597/625 954/1000 1145/1200 1.7 1.7 1.7 1.7 Maximum 1 Cycle Surge Current (50/60Hz) [Apk] Maximum On-State Voltage Drop @ Rated Current [Vpk] Thermal Resistance Junction to Case (Rjc) [°C/W] Maximum 1/2 Cycle I² t for Fusing (50/60Hz) [A² sec] Minimum Power Factor (with Maximum Load) 1.02 0.63 0.31 0.28 285/259 1779/1621 4555/4150 6560/5976 0.5 0.5 0.5 0.5 INPUT SPECIFICATIONS (1) Description CMRD60xx CMRA60xx 4-32 VDC 90-140 Vrms Minimum Turn-On Voltage 4.0 VDC 90 Vrms Minimum Turn-Off Voltage 1.0 VDC 10 Vrms Maximum Reverse Voltage 32 VDC - Control Voltage Range Maximum Input Current 30 mA (4) - 14 mA @ 5 VDC 15 mA @ 120 Vrms Maximum Turn-On Time [msec] (3) 1/2 Cycle 10 Maximum Turn-Off Time [msec] 1/2 Cycle 40 Typical Input Current (4) GENERAL SPECIFICATIONS Description Parameters Dielectric Strength, Input/Output/Base (50/60Hz) 4000 Vrms Minimum Insulation Resistance (@ 500 V DC) 10 9 Ohms Maximum Capacitance, Input/Output 8 pF Ambient Operating Temperature Range -40 to 80˚C Ambient Storage Temperature Range -40 to 125˚C Status Indicator Display Weight (typical) Encapsulation Terminals Maximum Wire Size: Recommended Terminal Screw Torque Range: Green LED 16.8 oz. (476g) Themally Conductive Epoxy Cage Type Output: AWG 8 (4.8mm) Input: AWG 12(2.5mm) Output:10-15 in lb(1.1-1.7 Nm) Input: 5-6 in lb (0.6-0.7 Nm) GENERAL NOTES 1) All parameters at 25°C unless otherwise specified. 2) Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3) Turn-on time for DC control random turn-on versions is 0.02 msec 4) Input circuitry version incorporates active current limiter. MECHANICAL SPECIFICATIONS THERMAL DERATE INFORMATION AGENCY APPROVALS Designed in accordance with the requirements of IEC 62314 E116950 LR81689 126921 UG Rev110211 ANNEX - ENVIROMENTAL INFORMATION