AZ7709 SPST SUBMINIATURE POWER RELAY FEATURES • • • • • • 4 kV dielectric strength Proof tracking index (PTI/CTI) 250 5 Amp switching capability (version “T” 10 Amp) Epoxy sealed version available UL, CUR file E365652 TÜV file B150188793002 CONTACTS Arrangement SPST (1 Form A) Ratings Resistive load: Max. switched power: (Version “T”: Max. switched current: (Version “T”: Max. switched voltage: 150 W or 1250 VA 300 W or 2500 VA) 5A 10 A) 30 VDC* or 250 VAC * Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR Standard coil 5 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3] 5 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3] 1/6 HP at 125/250 VAC, 85°C, 100k cycles [1][2][3] Sensitive coil 3 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3] 3 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3] High capacity version “T” - Standard coil 10 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3] 10 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3] 1/6 HP at 125/250 VAC, 85°C, 100k cycles [1][2][3] High capacity version “T” - Sensitive coil 8 A at 250 VAC, resistive, 85°C, 100k cycles [1][2][3] 8 A at 30 VDC, resistive, 85°C, 100k cycles [1][2][3] TÜV Standard coil 5 A at 250 VAC, 100k cycles [1][2] 5 A at 30 VDC, 100k cycles [1][2] Resistance Life Expectancy Mechanical Minimum operations 1 x 107 Standard version Electrical 1 x 105 at 5 A 250 VAC Res. High capacity version “T” Electrical 1 x 105 at 10 A 250 VAC Res. Operate Time (max.) 8 ms at nominal coil voltage Release Time (max.) 4 ms at nominal coil voltage (with no coil suppression) Dielectric Strength (at sea level for 1 min.) 4000 Vrms coil to contact 1000 Vrms between open contacts Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Insulation (according to DIN VDE 0110, IEC 60664-1) C250 Overvoltage category: III Pollution dregree: 3 Nominal voltage: 250 VAC Dropout Greater than 5% of nominal coil voltage Sensitive coil 3 A at 250 VAC, 100k cycles [1][2] 3 A at 30 VDC, 100k cycles [1][2] Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 85°C (185°F) Vibration 1.65 mm DA at 10–55 Hz High capacity version “T” - Standard coil 10 A at 250 VAC, 100k cycles [1][2] 10 A at 30 VDC, 100k cycles [1][2] Shock 10 g operating, 100 g damage Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 6 grams High capacity version “T” - Sensitive coil 8 A at 250 VAC, 100k cycles [1][2] 8 A at 30 VDC, 100k cycles [1][2] Material GENERAL DATA Silver cadmium oxide [1], silver tin oxide [2], silver tin oxide indium oxide [3], gold plating available < 100 milliohms initially ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2015-04-09 AZ7709 NOTES COIL Power 1. All values at 20°C (68°F) 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. At Pickup Voltage (typical) 220 mW (standard coil) 113 mW (sensitive coil) Max. Continuous Dissipation 760 mW at 20°C (68°F) ambient Temperature Rise (at nominal voltage) 41°C (74°F) standard coil 22°C (40°F) sensitive coil Temperature Max. 105°C (221°F) Class A Max. 155°C (311°F) Class F RELAY ORDERING DATA STANDARD COIL COIL SPECIFICATIONS ORDER NUMBER* Nominal Coil VDC Must Operate VDC Max. Continuous VDC Coil Resistance Ohm ± 10 Form A (SPST) 3 2.1 3.9 20 AZ7709-1A-3D 5 3.5 6.5 55 AZ7709-1A-5D 6 4.2 7.8 80 AZ7709-1A-6D 9 6.3 11.7 180 AZ7709-1A-9D 12 8.4 15.6 320 AZ7709-1A-12D 18 12.6 23.4 720 AZ7709-1A-18D 24 16.8 31.2 1,280 AZ7709-1A-24D 48 33.6 62.4 5,120 AZ7709-1A-48D SENSITIVE COIL COIL SPECIFICATIONS Nominal Coil VDC Must Operate VDC ORDER NUMBER* Max. Continuous VDC Coil Resistance Ohm ± 10% Form A (SPST) 3 2.25 3.9 45 AZ7709-1A-3DS 5 3.75 6.5 125 AZ7709-1A-5DS 6 4.50 7.8 180 AZ7709-1A-6DS 9 6.75 11.7 400 AZ7709-1A-9DS 12 9.00 15.6 720 AZ7709-1A-12DS 18 13.50 23.4 1,600 AZ7709-1A-18DS 24 18.00 31.2 2,800 AZ7709-1A-24DS * “1A” denote silver cadmium contacts. Substitute “1AE” in place of “1A” for silver tin oxide contacts. Substitute “1AB” in place of “1A“ for silver tin oxide indium oxide contacts. Substitute “AZ7709T” in place of “AZ7709” for high capacity version. Add suffix “E” at the end of order number for sealed version. Add suffix “G” at the end of order number for gold plated contacts. Add suffix “F” at the end of order number for Class F version. ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2015-04-09 AZ7709 MECHANICAL DATA PC BOARD LAYOUT .403 Max [10.7] .718 Max [18.9] 4 x ø .05 [ø 1.3] .618 Max [15.7] .50 ±.004 [12.7 ±.1] .10 ±.004 [2.54 ±.1] .30 ±.004 [7.62 ±.1] .161±.02 [4.1 ±.3] .018 x .018 [0.45 x 0.45] 2 x .012 [0.3] .50 ±.008 [12.7 ±.2] .10 ±.008 [2.54 ±.2] .039 [1.0] Viewed toward terminals WIRING DIAGRAMS 1 3 .30 ±.008 [7.62 ±.2] 2 4 .067 [1.71] Viewed toward terminals Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" ZETTLER electronics GmbH Junkersstr. 3, D-82178 Puchheim, Germany - A ZETTLER GROUP Company phone: +49 89 800 97-0 [email protected] fax: +49 89 800 97-200 www.ZETTLERelectronics.com This product specification to be used only together with the application notes which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf 2015-04-09