LED Display Product Data Sheet LTL-2300JD Spec No.: DS30-2001-352 Effective Date: 04/03/2002 Revision: A LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien 1 Road, Chung Ho, New Taipei City 23585, Taiwan, R.O.C. Tel: 886-2-2222-6181 Fax: 886-2-2221-1948 / 886-2-2221-0660 http://www.liteon.com/opto LITE-ON ELECTRONICS, INC. Property of Lite-On Only FEATURES ＊LARGE, BRIGHT, UNIFORM LIGHT EMITTING AREAS. ＊LOW POWER REQUIREMENT. ＊EXCELLENT ON-OFF CONTRAST. ＊CAN BE USED WITH PANEL AND LEGEND MOUNT. ＊WIDE VIEWING ANGLE. ＊SOLID STATE RELIABILITY. ＊CATEGORIZED FOR LIGHT OUTPUT. DESCRIPTION The LTL-2300JD is a rectangular light source display that is designed for a variety of applications where a large bright source of light is required. This device utilizes AlInGaP Hyper Red LED chips, which are made from AlInGaP on a non-transparent GaAs substrate, and has white bar color. DEVICE PART NO. DESCRIPTION AlInGaP Hyper Red Universal Rectangular Bar LTL-2300JD PART NO.: LTL-2300JD BNS-OD-C131/A4 PAGE: 1 of 5 LITE-ON ELECTRONICS, INC. Property of Lite-On Only PACKAGE DIMENSIONS NOTES: All dimensions are in millimeters. Tolerances are 0.25-mm (0.01“) unless otherwise noted. INTERNAL CIRCUIT DIAGRAM PART NO.: LTL-2300JD BNS-OD-C131/A4 PAGE: 2 of 5 LITE-ON ELECTRONICS, INC. Property of Lite-On Only PIN CONNECTION PART NO.: LTL-2300JD BNS-OD-C131/A4 No. CONNECTION 1 CATHODE A 2 ANODE A 3 CATHODE B 4 ANODE B PAGE: 3 of 5 LITE-ON ELECTRONICS, INC. Property of Lite-On Only ABSOLUTE MAXIMUM RATING AT Ta=25oC PARAMETER MAXIMUM RATING UNIT Power Dissipation Per Bar 70 mW Peak Forward Current Per Bar ( 1/10 Duty Cycle, 0.1ms Pulse Width ) 90 mA 25 0.28 mA mA/0C Continuous Forward Current Per Bar Derating Linear From 250C Per Bar Reverse Voltage Per Bar 5 V 0 0 Operating Temperature Range -35 C to +105 C Storage Temperature Range -350C to +1050C Solder Temperature 1/16 inch Below Seating Plane for 3 Seconds at 2600C ELECTRICAL / OPTICAL CHARACTERISTICS AT Ta=25oC PARAMETER SYMBOL MIN. TYP. MAX. UNIT TEST CONDITION Average Luminous Intensity IV Peak Emission Wavelength 320 950 ucd IF=1mA p 650 nm IF=20mA Spectral Line Half-Width 20 nm IF=20mA Dominant Wavelength d 639 nm IF=20mA Forward Voltage. Per Bar VF 2.0 2.6 V IF=20mA Reverse Current, Per Bar IR 100 A VR=5V Note: Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (Commision Internationale De L’Eclariage) eye-response curve. PART NO.: LTL-2300JD BNS-OD-C131/A4 PAGE: 4 of 5 LITE-ON ELECTRONICS, INC. Property of Lite-On Only TYPICAL ELECTRICAL / OPTICAL CHARACTERISTIC CURVES (25oC Ambient Temperature Unless Otherwise Noted) PART NO.: LTL-2300JD BNS-OD-C131/A4 PAGE: 5 of 5