Fairchild FEP16CT 16 ampere glass passivated super fast rectifier Datasheet

FEP16AT - FEP16JT
0.185(4.70)
0.175(4.44)
0.412(10.5)
MAX
Features
0.055(1.40)
0.045(1.14)
0.154(3.91)
0.148(3.74)
•
Low forward voltage drop.
•
High surge current capacity.
0.113(2.87)
0.27(6.86)
0.103(2.62)
0.23(5.84)
0.594(15.1)
•
High current capability.
•
High reliability.
0.587(14.9)
TO-220AB
1
2
3
0.16(4.06)
Dimensions are in: inches (mm)
0.14(3.56)
0.11(2.79)
0.10(2.54)
0.56(14.22)
PIN 1
+
PIN 3
CASE
PIN 2
PIN 1
PIN 1
AC
PIN 3
CASE
PIN 2
PIN 3
Positive CT
CASE
PIN 2
Negative CT
Doubler
Suffix “A”
Suffix “D”
0.53(13.46)
0.037(0.94)
0.027(0.68)
0.025(0.64)
0.105(2.67)
0.014(0.35)
0.095(2.41)
16 Ampere Glass Passivated Super Fast Rectifiers
Absolute Maximum Ratings*
Symbol
IO
TA = 25°C unless otherwise noted
Parameter
Value
Units
16
A
200
A
8.33
66
15
W
mW/°C
°C/W
RθJA
Average Rectified Current
.375 " lead length @ TA = 100°C
Peak Forward Surge Current
8.3 ms single half-sine-wave
Superimposed on rated load (JEDEC method)
Total Device Dissipation
Derate above 25°C
Thermal Resistance, Junction to Ambient
RθJL
Thermal Resistance, Junction to Lead
2.2
°C/W
Tstg
Storage Temperature Range
-65 to +150
°C
TJ
Operating Junction Temperature
-65 to +150
°C
if(surge)
PD
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Electrical Characteristics
TA = 25°C unless otherwise noted
Parameter
Device
Units
16AT
16BT
16CT
16DT
16FT
16GT
16HT
16JT
Peak Repetitive Reverse Voltage
50
100
150
200
300
400
500
600
Maximum RMS Voltage
35
70
105
140
210
280
350
420
V
50
100
150
200
300
400
500
600
V
DC Blocking Voltage
(Rated VR)
Maximum Reverse Current
@ rated VR
T A = 25°C
T A = 100°C
Maximum Reverse Recovery Time
IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A
Maximum Forward Voltage @ 8.0A
Typical Junction Capacitance
VR = 4.0. f = 1.0 MHz
1999 Fairchild Semiconductor Corporation
µA
µA
10
500
35
50
0.95
1.3
85
V
1.5
60
nS
V
pF
FEP16AT - FEP16JT, Rev. A
FEP16AT - FEP16JT
Discrete POWER & Signal
Technologies
FEP16AT - FEP16JT
Typical Characteristics
Non-Repetitive Surge Current
12
SINGLE PHASE
HALF WAVE
60HZ
RESISTIVE OR
INDUCTIVE LOAD
.375" (9.0mm) LEAD
LENGTHS
8
4
0
0
25
50
75
100
125
150
AMBIENT TEMPERATURE (º C)
175
200
160
120
80
40
0
1
2
5
10
20
50
NUMBER OF CYCLES AT 60Hz
100
Reverse Characteristics
Forward Characteristics
1000
REVERSE CURRENT ( µ A)
100
FEP16AT-FEP16DT
10
FEP16FT-FEP16JT
1
0.1
TA = 25 º C
Pulse Width = 300µs
2% Duty Cycle
0.01
0.4
0.6
0.8
1
1.2
1.4
FORWARD VOLTAGE (V)
100
T A = 100 ºC
10
1
T A = 25º C
0.1
1.6
0
20
40
60
80
100
120
140
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
1.8
Junction Capacitance
100
90
CAPACITANCE (pF)
FORWARD CURRENT (A)
FORWARD CURRENT (A)
16
PEAK FORWARD SURGE CURRENT (A)
Forward Current Derating Curve
20
80
70
FEP16AT-FEP16DT
60
50 FEP16FT-FEP16JT
40
50Ω
NONINDUCTIVE
1
2
5
10
20
REVERSE VOLTAGE (V)
50Ω
NONINDUCTIVE
50
+0.5A
100
trr
(-)
DUT
50V
(approx)
50Ω
NONINDUCTIVE
Pulse
Generator
(Note 2)
0
-0.25A
(+)
OSCILLOSCOPE
(Note 1)
-1.0A
1.0cm
SET TIME BASE FOR
5/ 10 ns/ cm
Reverse Recovery Time Characterstic and Test Circuit Diagram
FEP16AT - FEP16JT, Rev. A
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
ACEx™
CoolFET™
CROSSVOLT™
E2CMOSTM
FACT™
FACT Quiet Series™
FAST®
FASTr™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
POP™
PowerTrench™
QS™
Quiet Series™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
TinyLogic™
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
2. A critical component is any component of a life
support device or system whose failure to perform can
systems which, (a) are intended for surgical implant into
be reasonably expected to cause the failure of the life
the body, or (b) support or sustain life, or (c) whose
support device or system, or to affect its safety or
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
effectiveness.
reasonably expected to result in significant injury to the
user.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification
Product Status
Definition
Advance Information
Formative or
In Design
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
Preliminary
First Production
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
No Identification Needed
Full Production
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
Obsolete
Not In Production
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Similar pages