M1F - M7F SURFACE MOUNT SILICON RECTIFIER DIODES VOLTAGE RANGE: 50 - 1000V CURRENT: 1.0 A Features ! Diffused junction ! For surface mounted applications ! Low reverse leakage current ! Low forward voltage drop ! ! High current capability Plastic material has UL flammability classification 94V-0 B C E Mechanical Data ! Case: SMAF,Molded Plastic ! Terminals: Solder Plated, Solderable ! ! ! per MIL-STD-750, Method 2026 Polarity:Color band denotes cathode end Mounting Position:Any Weight:0.0018 ounce, 0.064 grams SMAF Dim Min Max Typ A 4.75 4.85 4.80 B 3.68 3.72 3.70 C 2.57 2.63 2.60 D 0.097 1.03 1.00 E 1.38 1.42 1.40 H 0.13 0.17 0.15 L 0.63 0.67 0.65 All Dimensions in mm D H L E A Maximum Ratings and Electrical Characteristics TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbol Characteristic M1F M2F M3F M4F M5F M6F M7F Unit Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TL=100 ℃ I(AV) 1.0 A IFSM 30 A VF 1.1 V Peak Forward Surge Current 8.3ms Single Half Sine-Wave Super Imposed On Rated Load (JEDEC Method) Maximum Forward Voltage at 1.0A DC Maximum DC Reverse Current @TJ=25℃ at Rated DC Blocking Voltage @TJ=100℃ Typical Junction Capacitance (Note1) Typical Thermal Resistance (Note2) Operating Temperature Range Storage Temperature Range 5.0 IR 100 uA 10 pF 30 ℃/W TJ -55 to +125 ℃ TSTG -55 to +125 ℃ CJ R JC NOTES:1.Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 2.Thermal resistance junction to lead. 1 of 2 www.sunmate.tw FIG. 1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT AMPERES 1.0 0.8 0.6 0.4 0.2 0 25 50 75 100 125 150 FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 30 20 10 PULSE WIDTH 8.3ms SINGLE HALF-SINE-WAVE (JEDEC METHOD) 0 1 175 2 5 10 20 50 100 NUMBER OF CYCLES AT LEAD TEMPERATURE ℃ SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.3-TYPICAL FORWARD CHARACTERISTICS 1000 INSTANTANEOUS REVERSE CURRENT, (uA ) INSTANTANEOUS FORWARD CURENT,(A) 10 1.0 0.1 T J=25℃ PULSE WIDTH 300US 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 100 0 T J=125℃ 10 1.0 T J=25℃ 0.1 0.01 0 1.8 20 40 60 80 100 120 PERCENT RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS FORWARD VOLTAGE,VOLTS 2 of 2 www.sunmate.tw 140