CMD4A Model Replacement for Plastic SMD Crystal Frequency Range: Calibration Tolerance: Frequency Stability: Temperature Range: (Option) (Option) Storage: Shunt Capacitance: Drive Level: ESR: 3.5MHz to 32MHz (fund) 27MHz to 86MHz (3rd O/T) ±10ppm to ±100ppm ±10ppm to ±100ppm 0°C to 70°C e Fre -20°C to 70°C ad HS t e L Ro plian -40°C to 85°C m Co -55°C to 120°C 7.0pF Max 100uW Typical see table 1 Designed as a drop in replacement for older style plastic crystal packages. Resistance at series resonance 1K Tape and Reel <3ppm 1st/yr Max Packaging: Aging: **Not recommended for new designs 0.400 (10.16) #4 Freq. (MHz) Max ESR 3.5 - 4.0 4.1 - 4.9 5.0 - 5.9 6.0 - 11.9 12.0 - 14.9 15.0 - 30.0 30.1 - 86.0 150 120 100 90 70 50 100 Table 1 0.150 (3.81) #3 Terminals #1 #4 Crystal #2 #3 GND 0.008 ±0.004 (0.20 ±0.10) 0.516 (13.10) #4 #1 See Options #2 0.086 (2.20) #3 0.197 (5.00) 0.142 (3.60) 0.094 (2.40) 0.063 (1.60) 0.370 (9.40) 0.039 (1.00) 0.181 (4.60) 0.094 (2.40) #2 Dimensions inches (mm) #1 All dimensions are Max unless otherwise specified. 0.374 (9.50) 0.063 (1.60) 0.118 (3.00) CMD4X X X X X - Freq Frequency Tolerance at 25°C 1 2 3 4 5 6 7 ±10 ppm ±15 ppm ±20 ppm ±25 ppm ±30 ppm ±50 ppm ±100 ppm Frequency Stability over Temp Range A B C D E F G H I ±10 ppm (0 to 70°C) ±15 ppm (0 to 70°C) ±20 ppm (0 to 70°C) ±25 ppm (0 to 70°C) ±30 ppm (0 to 70°C) ±50 ppm (0 to 70°C) ±100 ppm (0 to 70°C) ±15 ppm (-20 to 70°C) ±20 ppm (-20 to 70°C) J K L M N O P Q ±30ppm ±50 ppm ±100 ppm ±20 ppm ±25 ppm ±30 ppm ±50 ppm ±100 ppm Load Capacitance (-20 to 70°C) (-20 to 70°C) (-20 to 70°C) (-40 to 85°C) (-40 to 85°C) (-40 to 85°C) (-40 to 85°C) (-40 to 85°C) 1 2 3 4 5 6 7 8 Series 14 pF 16 pF 18 pF 20 pF 22 pF 25 pF 32 pF Options Can Height A 4.0mm B 4.5mm C 5.5mm Mode Example: CMD44F51B-20.000 = ±25ppm at 25°C, ±50ppm 0 to 70°C, 20pF Load Cap, Fundamental, 4.5mm, 20.000MHz 1 Fundamental 3.5-32MHz 3 3rd Overtone 27-86MHz Specifications subject to change without notice. TD-02075 Rev.D 41