Embedded Power for Business-Critical Continuity Rev. 10.01.08_124 DA4 Series of 3 DA4 Series 4 Watts DA4-050EU DA4-050US Total Power: Input Voltage: # of Outputs: DA4-050CH 4 Watts 90-264 VAC Single RoHS Electrical Specifications Special Features Input Input range 90-264 VAC (wide range) • Switching wallmount power supply • Available in multiple AC plug configurations • CE Mark EMC & LVD • Universal AC input • Regulated output • Overload and short circuit protection • Constant voltage, constant current • High MTBF • Built in EMI filter (CISPR 22 Class B) • LED power good indicator Frequency EMI/RFI 47-63 Hz FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B &EMC89/336/EEC Safety ground leakage current 100 µA @ 50/60 Hz, 230 VAC input Output Voltage (Vo) 5.5V (5.0V - 6.0V) Maximum Power (Po) 4W Hold-up time Overvoltage protection 15 ms. typical at full load @ 115 VAC 25% above nominal output maximum Latching type Output short circuit protection auto recover Overload protected > 800mA DC cable with 2.5 mm x 5.5 mm barrel plug DC plug center +V; DC plug outer -V DC plug center -V; DC plug outer +V Overload protection Output cable/ connector barrel polarity Reverse polarity -0001 suffix Environmental Specifications Operating temperature: Safety UL CSA TUV NEMKO CB CE CCC 60950 / 6500 60950 60950 60950 Certificate and report EMC & LVD Mark 0° to 50°C ambient -40°C to +85°C Storage temperature: Electromagnetic susceptibility: Designed to meet EN55082-1 Humidity: Operating; non-condensing 20% to 90% RH Vibration: Per IEC 60068-2-6 Embedded Power for Business-Critical Continuity Rev.10.01.08_124 DA4 Series of 3 Ordering Information Model Number Maximum Power Output Voltage Minimum Load Maximum Load Peak Load Ripple P/P (PARD)1 DA4-050US 4W 5.5V 0 0.75A 0.80A 150mV DA4-050EU 4W 5.5V 0 0.75A 0.80A 150mV DA4-050CH 4W 5.5V 0 0.75A 0.80A 150mV 1. Peak-to-peak with 1 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. 2. Output should not be crounded for EMI purpose. 3. Add -0001 suffix to the part number for reverse polarity, for example DA4-050US-0001. Mechanical Drawing DA4-050US CASE TOP 1.80" (45.8) 1.57" (39.8) 78.7" (2000.0) CASE BOTTOM 1.02" (26.0) 2.36" (60.0) DA4-050EU 1.57" (39.8) 78.7" (2000.0) 2.36" (60.0) 2.23" (58.3) CASE TOP 1.02" (26.0) CASE BOTTOM Embedded Power for Business-Critical Continuity Americas Mechanical Drawing Rev. 10.01.08_124 DA4 Series of 3 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone: +1 760 930 4600 Facsimile: +1 760 930 0698 DA4-050CH CASE TOP 2.36" (60.0) 1.80" (45.8) 1.57" (39.8) 78.7" (2000.0) Europe (UK) 1.02" (26.0) CASE BOTTOM Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.astecpower.com www.artesyn.com [email protected] [email protected] Notes: While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. 1. Specifications subject to change without notice. 2. all dimensions in inches (mm), tolerance is ±.02” 3. Warranty: 2 year 4. Weight: 0.181 lb. / 0.082 kg. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2007 Emerson Electric Co.