CAR1248FP Series 1200 Watt 48V Front End Power Supply Features: ∎ 1200 Watts in 1U ∎ Ultra High Power Density of 19W/in3 ∎Active Current Sharing (Single Wire) ∎Remote on/off, Remote Sense, Voltage Program & Current Share Control Circuits ∎Constant Current ∎Current, Voltage, AC OK, DC OK & Temperature OK ∎ Microprocessor based design allows for I2C communication ∎ Optional Universal / 5-Bay 19” Rack Delivers 6kW of Total Power ∎ International Safety Approvals - UL, CSA, CE Mark (LVD), TUV FEATURES BENEFITS KEY MARKETS & APPLICATIONS High Power Density 19W/in3 System Scalability up to 6000W 1U x 2U High Form Factor Load Sharing & Fault Tolerant 5VSB Standby Voltage I 2C Digital Control & Monitoring Leaves plenty of room for your applications Allows flexibility with minimum investment Minimize space required for power needs Excellent reliability in N+1 operation Voltage for external housekeeping and monitoring circuitry Ideal for monitoring, housekeeping and control ∎ Distributed Power ∎ Blade Servers ∎ Mid-end servers ∎ Network Equipment ∎Network Attached Storage ∎ Automatic Test Equipment ∎ Storage Area Networks SPECIFICATIONS 1200 Watt +48V Front End Power Supply Input Voltage Range Input Current Maximum Inrush Current Input Protection Power Factor Efficiency Output Power Output Voltage Range Output Current Voltage Programming Standby Bias Voltage Voltage Regulation Ouput Ripple & Noise Transient Response Switching Frequency Hold-Up Time Remote On/Off Current Limit Protection Short Circuit Protection Over Voltage Protection Operating Temperature Over Temperature Protection EMI LED Indicators Analog Status & Control 85-264 VAC, 47-63 Hz 12.75A @ 100VAC, 7.9A @ 180 VAC, full load 40A max. cold start (per ETS 300 132-1 and bellcore specifications) Dual Fused (Line & Neutral) 20 Amp / 250 VAC Type 3AB Axial 0.99 typical complies with IEC555, EN60555-2, EN61000-3-2 91% typical at 230 VAC Full Load Operation, 85% Typical @ 90 VAC Full Load Operation 1200W at High Line Operation (230 VAC), Derate to 1000 W at Low Line Operation (90 VAC) +48 VDC (±10%) 25A @ +48 VDC for High Line Operation (230 VAC), reduced to 20.8A at Low Line Operation (90VAC) Vout = 43.2V + 3.3x (Vprog - 0.364)V where 0.364 < Vprog < 3.27V 5VSB@500mA, reference to +48VDC Return ±2% of Vnom for any combination of line, load and temperature ETS300 132-2, 32dBnrc. Bandwidth: 25Hz - 20kHz. 2mVrms pk-pk with 0.1µF ceramic and 10µF electrolytics caps 5% max deviation Recovery time 300µs @ 50% load step and di/dt < 1A/µs 200kHz (input) / 400kHz (output) 20ms at 1KW (typical) @ 90VAC ON if >3V or open; OFF if <1V (max. sink 1mA) Open collector type 110-130% of Iout Nominal Self protected with auto recovery +60 VDC max, latched. Reset condition by recycling AC Input or toggling remote on/off -10°C to +70°C. power derating above 55°C at 2.5% per °C Non latching; protection active at 110°C internal temperature, restart at 95°C (typical) FCC-B & EN55022-B with specified filter or at rack level, GR-1089-CORE Green = AC OK & DC OK, Red = Fault Voltage Programming (V Prog), Load sharing (I Share), Remote ON/OFF, Current Monitor (I Monitor), Over temperature (Temp Warning), Fault, PS Present, Module Enable I 2C Option, see detailed specification for details IEC68-2-27, MIL-STD-810E, Telcordia GR-63-CORE 11.02 x 3.44 x 1.65” / 284.5 x 87.4 x 41.9mm 2.8 lbs IEC 950 per EN60950, UL60950, CSA 22.2-950, CE Mark (LVD), TUV I 2C Signals, Bezel Digital Status & Control Shock & Vibration Dimensions Weight Safety Approvals Options rev 100506 www.lineagepower.com/oem Lineage Power Lineage Power Lineage Power (China) 3000 Skyline Dr. Mesquite, TX 75149 Phone: (972) 284-2000 2841 Dow Avenue Tustin, CA 92780 USA Phone: (714) 544-6665 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Shanghai, 201401 China Phone: 021 6710 8910 CAR1248FP Series 1200 Watt 48V Front End Power Supply OUTLINE DRAWING PART NUMBER DEFINITION GUIDE CAR 12 48 F P x xx -1A Series 12=1200W Output Current 48=48V Output Voltage Rev. Blank=Non-compliant YO=5 of 6 Compliant ZO=6 of 6 Compliant RoHS B=Bezel Option Blank=None Options F=Front End Type P=Positive Examples: Polarity CAR1248FPZO-1A 1200W/48V Front End, 6 of 6 RoHS CAR1248FPBYO-1A 1200W/48V Front End, Bezel, 5 of 6 RoHS CAR1248FPB-1A 1200W/48V Front End, Bezel PIN OUT INFORMATION A1 VSB 5V B4 PS Present D1 V Prog P4 Vout A2 VSB 5V Return B5 Serial Data Line D2 OVP Test Point P5 Vout Return A3 Signal RTN B6 Serial Data Clock D3 Remote On/Off A4 Write Protect C1 I Share D4 DC OK A5 Remote Sense (+) C2 N/C D5 AC OK A6 Remote Sense (-) C3 Temp Warning D6 Interrupt B1 Fault C4 I2C Address (A0) P1 Line B2 I Monitor C5 I2C Address (A1) P2 Neutral B3 Module Enable C6 I2C Address (A2) P3 Chassis D1 D2 D3 D4 D5 D6 P1 P2 P3 C1 C2 C3 C4 C5 C6 B1 B2 B3 B4 B5 B6 P4 A1 A2 A3 A4 A5 A6 rev 100506 P5 Connector is FCI / Berg Part # 51939-070 Mates with FCI / Berg Part # 51915-050 www.lineagepower.com/oem Lineage Power Lineage Power Lineage Power (China) 3000 Skyline Dr. Mesquite, TX 75149 Phone: (972) 284-2000 2841 Dow Avenue Tustin, CA 92780 USA Phone: (714) 544-6665 1353 Chenqiao Road, Shanghai Sengpu Industrial Park Shanghai, 201401 China Phone: 021 6710 8910