PRELIMINARY NJW1168 AUDIO PROCESSOR with Input Selector and Subwoofer Output ■ GENERAL DESCRIPTION The NJW1168 is a sound processor with subwoofer output includes all of functions processing audio signal for TV, such as input selector, tone control, balance, volume, mute, and AGC functions. Also the NJW1168 includes the LPF for subwoofer output and bass boost function. The eala reproduces a natural surround sound with clear vocal orientation. And also, voice enhancement gives clear sound such as dialogs. 2 All of internal status and variables are controlled by I C BUS interface. ■ PACKAGE OUTLINE NJW1168L ■ FEATURES ● Operating Voltage 7.5 to 13V ● 3ch Output(Lch, Rch, Subwoofer ch) / 2ch Output(Lch, Rch) ● 4ch Input Selector ● LPF Filter (Adjustable cut off frequency by external parts) ● AGC Circuit (It reduces volume difference among input sources.) 2 Adjustable AGC compression level by I C BUS ● eala(NJRC Original Surround System) ● Simulated Stereo ● Voice Enhancement System 2 ● I C BUS Interface ● Bi-CMOS Technology ● Package Outline SDIP42 ■ BLOCK DIAGRAM 2 I C Bus Interface eala & Simulated Stereo Voice Enhancement AGC VOL1 VOL2 Tone VOL1 LPF Tone VOL2 Trimmer LPF VOL2 Bias -1- PRELIMINARY NJW1168 ■ PIN FUNCTION 22 42 21 1 No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 -2- SYMBOL IN1a IN2a IN3a IN4a MONa CMON LF1 OUTw VE-FIL3 VE-FIL2 VE-FIL1 CVE TONE-Ha TONE-La OUTa CVa AUX0 AUX1 SDA SCL GND FUNCTION A ch Input 1 A ch Input 2 A ch Input 3 A ch Input 4 A ch Input Selector Monitor Output MONa/b switching noise rejection Capacitor Low Pass Filter Capacitor 1 Sub Woofer Output Voice Enhancement Filter Capacitor 3 Voice Enhancement Filter Capacitor 2 Voice Enhancement Filter Capacitor 1 VE switching noise rejection Capacitor Ach TONE Treble Filter Capacitor Ach TONE Bass Filter Capacitor Ach Output Ach Volume switching noise rejection Capacitor Auxiliary Output 0 Auxiliary Output 1 I2C Data Input I2C Clock Input Ground No. 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 SYMBOL V+ VREF CTL CTH CVw CVb OUTb TONE-Lb TONE-Hb CSR eala-FIL AGC DCC2 DCC1 LF2 LF3 MONb IN4b IN3b IN2b IN2b FUNCTION Power Supply Reference Voltage stabilizing Capacitor Tone Control Bass switching noise rejection Capacitor Tone Control Treble switching noise rejection Capacitor SWch Trimmer switching noise rejection Capacitor Bch Volume switching noise rejection Capacitor Bch Output Bch TONE Bass Filter Capacitor Bch TONE Treble Filter Capacitor eala switching noise rejection Capacitor eala Filter Capacitor AGC Smoothing Filter Capacitor Coupling Capacitor 2 Coupling Capacitor 1 Low Pass Filter Capacitor 2 Low Pass Filter Capacitor 3 B ch Input Selector Monitor Output B ch Input 4 B ch Input 3 B ch Input 2 B ch Input 1 PRELIMINARY NJW1168 ■ ABSOLUTE MAXIMUM RATING (Ta=25°C) PARAMETER SYMBOL RATING UNIT + Supply Voltage V 15 V Power Dissipation PD 700 mW Operating Temperature Range Topr -20 to +75 °C Storage Temperature Range Tstg -40 to +125 °C ■ ELECTRICAL CHARACTERISTICS ( Ta=25°C, V+=9V, RL=47kΩ, Vin=100mVrms/1kHz unless otherwise specified) Condition PARAMETER SYMBOL Input INa INb + Operating Voltage Supply Current V ICC No Signal Reference Voltage VREF No Signal Maximum Input Voltage VIM VOL=-20dB,THD=1% Maximum Output Voltage VOM VOL=0dB, THD=1% Monitor Output Gain GVMON MON OUT Channel Balance Balance Boost A GCB BABST Balance Cut A BACUT Balance Boost B BBBST Balance Cut B BBCUT Trimmer Boost TRBST Trimmer Cut TRCUT VOL=0dB CHS=”0”,BAL=”111111” CHS=”1”, BAL=”111111” Vin = 1Vrms CHS=”1”,BAL=”111111” CHS=”0”, BAL=”111111” Vin = 1Vrms VOL=0dB, f=50Hz TRIM = +30dB VOL=0dB, f=50Hz TRIM = -6dB Vo=0.5Vrms, BW=400Hz to 30kHz Total Harmonic Distortion THD Maximum Gain GVMAX Minimum Gain GVMIN Cross Talk Channel Separation CT CS Output Noise Voltage 1 VNO1 Output Noise Voltage 2 VNO2 Output Noise Voltage 3 VNO3 VOL=0dB VOL=MUTE Vin=1Vrms Vin=1Vrms BW=400Hz to 30kHz Selected Input : No signal Unselected Inputs : Signal Vin=1Vrms BW=400Hz to 30kHz VOL=0dB A-Weighted VOL=MUTE A-Weighted VOL=MUTE, TRIM=MUTE A-Weighted Output MIN. TYP. MAX. UNIT - - - 7.5 - 9.0 13 13.0 25 V mA Vin Vin Vin Vin - OUTa OUTb OUTb OUTa 4.0 4.5 5.0 V 2.8 3.0 - Vrms - Vin OUTb - 2.5 - Vrms Vin Vin Vin Vin OUTa OUTb OUTa - 2.5 - dB -1.5 -2.0 0.0 0.0 1.5 2.0 dB dB Vin Vin OUTa - - -70 dB Vin Vin OUTb -2.0 0.0 2.0 dB Vin Vin OUTb - - -70 dB Vin Vin OUTw 28.0 30.0 32.0 dB Vin Vin OUTw -11.0 -6.0 -1.0 dB Vin Vin Vin - Vin Vin Vin OUTa OUTb OUTa OUTb OUTa OUTb - - 0.5 % -2.0 0.0 2.0 dB - - -80 dB Vin - OUTa - - -70 dB - Vin OUTb Vin - Vin OUTb OUTa - -80 -70 dB - - - - - - - - -90 (31.6) -106 (5.0) -85 (56.2) -96 (15.8) dBV (µVrms) dBV (µVrms) - - - - -100 (10.0) -90 (30.0) dBV (µVrms) BW : Band Width -3- PRELIMINARY NJW1168 ■ ELECTRICAL CHARACTERISTICS (Ta=25°C, V+=9V, RL=47kΩ, Vin=100mVrms/1kHz unless otherwise specified) Condition PARAMETER SYMBOL Input INa INb Output MIN. TYP. MAX. UNIT 12.5 15.0 17.5 dB -2.0 0.0 2.0 dB -17.5 -15.0 -12.5 dB 12.5 15.0 17.5 dB -2.0 0.0 2.0 dB -17.5 -15.0 -12.5 dB 1.0 3.0 5.0 dB 4.0 6.0 8.0 dB -2.5 0.0 2.5 dB -2.5 0.0 2.5 dB -2.5 0.0 2.5 dB -2.5 0.0 2.5 dB -14 -10 -6.0 dB 6.3 8.3 10.3 dB 2.1 4.1 6.1 dB 10.7 12.7 14.7 dB 8.4 10.4 12.4 dB 14.0 16.0 18.0 dB 1.0 1.0 3.0 3.0 5.0 5.0 dB dB ♦TONE High Frequency Boost HFBST BCT=”1” TREB=+15dB, f=10kHz High Frequency Flat HFFLT TREB=0, f=10kHz High Frequency Cut HFCUT BCT=”0” TREB=-15dB, f=10kHz Low Frequency Boost LFBST BCB=”1” BASS=+15dB, f=100Hz Low Frequency Flat LFFLT BASS=0, f=100Hz Low Frequency Cut LFCUT BCB=”0” BASS=-15dB, f=100Hz Vin Vin Vin Vin Vin Vin - Vin Vin Vin Vin Vin Vin OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb OUTa OUTb Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin OUTa OUTb OUTb OUTa OUTa OUTb OUTb OUTa OUTa OUTb OUTa OUTb ◆AGC Vin=100mVrms, f=1kHz AGC=”10010” Vin=100mVrms,f=1kHz AGC=”10110” AGC Boost1 AGCBST1 AGC Boost2 AGC BST2 AGC Flat1 AGCFLT1 AGC Flat2 AGCFLT2 AGC Flat3 AGCFLT3 Vin=500mVrms, f=1kHz AGC=”10010” AGC Flat4 AGCFLT4 Vin=650mVrms, f=1kHz AGC=”10011” AGC Cut AGCCUT Vin=2Vrms, f=1kHz AGC=”10000” Vin=200mVrms, f=1kHz AGC=”10000” Vin=350mVrms, f=1kHz AGC=”10001” ◆SURROUND Surround Gain1 SRGAIN1 Surround Gain2 SRGAIN2 Surround Gain3 SRGAIN3 Surround Gain4 SRGAIN4 Surround Gain5 SRGAIN5 Simulated Stereo1 Simulated Stereo2 SRSIM1 SRSIM2 -4- f=100Hz, SUR1 Surround Effect1 f=100Hz, SUR1 Surround Effect1 f=100 Hz, SUR1 Surround Effect2 f=100Hz, SUR1 Surround Effect2 f=100Hz, SUR1 Surround Effect3 f=1kHz, Simulated Stereo f=1kHz, Simulated Stereo PRELIMINARY NJW1168 ◆ VOICE ENHANCEMENT Condition PARAMETER SYMBOL Voice Enhancement Gain 1 VEGAIN1 Voice Enhancement Gain 2 VEGAIN2 Voice Enhancement Gain 3 VEGAIN3 Input INa INb Output f=5kHz, VE1 Vin Vin OUTa Voice Enhancement Effect 1 Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin OUTb OUTa OUTb OUTa OUTb - - - - - - f=5kHz, VE2 Voice Enhancement Effect 2 f=5kHz, VE3 Voice Enhancement Effect 3 MIN. TYP. MAX. UNIT 3.5 6.0 8.5 dB 7.5 10.0 12.5 dB 11.5 13.0 15.5 dB 4.5 2.0 0 3.5 0 - 5.5 3.0 0.5 V+ 0.5 ◆ AUX AUX0 Output Voltage VAUX0 AUX1 Output Voltage VAUX1 Logic Output : High Logic Output : Mid Logic Output : Low Logic Output : High Logic Output : Low V V -5- PRELIMINARY NJW1168 2 ■ I C BUS BLOCK CHARACTERISTICS (SDA,SCL) PARAMETER SYMBOL MIN. TYP. MAX. UNIT High Level Input Voltage VIH 3.0 - 5.0 V Low Level Input Voltage VIL 0 - 1.5 V High Level Input Current IIH - - 10 µA Low Level Input Current IIL - - 10 µA Low Level Output Voltage (3mA at SDA pin) VOL 0 - 0.4 V Maximum Output Current IOL -3.0 - - mA Maximum Clock Frequency fSCL - - 100 kHz Data Change Minimum Waiting Time tBUF 4.7 - - µs tHD:STA 4.0 - - µs Low Level Clock Pulse Width tLOW 4.7 - - µs High Level Clock Pulse Width tHIGH 4.0 - - µs Minimum Start Preparation Waiting Time tSU:STA 4.7 - - µs Minimum Data Hold Time tHD:DAT 5.0 - - µs Minimum Data Preparation Time tSU:DAT 250 - - ns Rise Time tR - - 1.0 µs Fall Time tF - - 300 ns tSU:STO 4.0 - - µs Data Transfer Start Minimum Waiting Time Minimum Stop Preparation Waiting Time 2 I C BUS Load Condition: Pull up resistance 4kΩ (Connected to +5V) Load capacitance 200pF (Connected to GND) SDA tBUF tR tF tHD:STA SCL tHD:STA tLOW P -6- S tHD:DAT tHIGH tSU:STA tSU:DAT Sr tSU:STO P PRELIMINARY NJW1168 ■ APPLICATION CIRCUIT C1 C2 C3 C4 0.47µF 1 INa1 INb1 42 2 INa2 INb2 41 3 INa3 INb3 40 4 INa4 INb4 39 5 MONa MONb 38 6 CMON LF3 37 7 LF1 LF2 36 8 OUTw 9 VE-FIL3 10 VE-FIL2 11 VE-FIL1 0.47µF 0.47µF 0.47µF C5 4.7µF + C6 4.7µF + C7 0.033µF + C9 1nF C10 1nF C11 4.7µF + C12 12 CVE 13 TONE-Ha 14 TONE-La 15 OUTa 16 CVa 17 2.2nF C13 100nF C14 4.7µF + C15 4.7µF + R16 220Ω R17 4.7kΩ R18 100Ω R19 220Ω NJW1168 C8 4.7µF C39 0.47µF C38 0.47µF C37 0.47µF C36 0.47µF C35 4.7 µF C34 0.022 µF C33 0.047µF + DCC1 35 C32 AGC C31 0.33µF C30 22nF 33 eala-FIL 32 C29 CSR 31 + 4.7µF C28 2.2nF C27 100nF TONE - Hb 30 TONE - Lb 29 C26 4.7uF OUTb 28 + C25 CVb 27 AUX0 CVw 26 18 AUX1 CTH 25 19 SDA CTL 24 20 SCL Vref 23 21 GND V+ 22 + 4.7µF +C24 4.7µF C23 4.7µF C22 4.7µF C21 4.7µF + + + + (✳) 4.7µF DCC2 34 C20 22µF 2 Separate the I C bus line and Signal line from the following terminals for avoiding digital noise problem and cross talk. Pin No. 7 9 10 11 Symbol LF1 VE-FIL3 VE-FIL2 VE-FIL1 Pin No. 13 14 29 30 Symbol TONE-Ha TONE-La TONE-Lb TONE-Hb Pin No. 32 36 37 Symbol eala-FIL LF2 LF3 -7- PRELIMINARY NJW1168 ■ TERMINAL DESCRIPTION PIN NO. SYMBOL 1 2 3 4 42 41 40 39 INa1 INa2 INa3 INa4 INb1 INb2 INb3 INb4 15 28 8 5 OUTa OUTb Outw MONa 38 MONb 35 DCC1 Ach Output Bch Output SWch Output A ch Input Selector Monitor Output B ch Input Selector Monitor Output Coupling Capacitor 1 32 ealaFIL eala Filter Capacitor FUNCTION TERMINAL VOLTAGE EQUIVALENT CIRCUIT Ach Input 1 Ach Input 2 Ach Input 3 Ach Input 4 Bch Input 1 Bch Input 2 Bch Input 3 Bch Input 4 20k V+/2 80k FB V+/2 100 FB V+/2 8k (eala) 24k(simulated) 13 TONE-Ha 30 TONE-Hb Ach TONE Treble Filter Capacitor Bch TONE Treble Filter Capacitor FB -8- V+/2 18k PRELIMINARY PIN NO. SYMBOL FUNCTION 14 TONE-La 29 TONE-Lb Ach TONE Bass Filter Capacitor Bch TONE Bass Filter Capacitor EQUIVALENT CIRCUIT NJW1168 TERMINAL VOLTAGE 12k FB 12k 33 AGC V+/2 AGC Smoothing Filter Capacitor 12k 400 1.4V 400 17 AUX0 Auxiliary Output 0 Low ; 0 V Mid ; 2.5 V High ; 5V FB 18 AUX1 Auxiliary Output 1 Low ; 0V High ; 3.5 V to V+ 12k -9- PRELIMINARY NJW1168 PIN NO. SYMBOL 19 20 SDA SCL FUNCTION EQUIVALENT CIRCUIT TERMINAL VOLTAGE 2 I C Data Input 2 I C Clock Input D1 D2 D13 D14 - 4k D15 8k 21 22 GND V+ Ground Power Supply - 23 Vref - Reference Voltage stabilizing Capacitor 200k V+/2 200k 31 CSR 12 CVE eala switching noise rejection Capacitor VE switching noise rejection Capacitor 0V 32k -10- PRELIMINARY PIN NO. SYMBOL 25 CTH 24 CTL FUNCTION EQUIVALENT CIRCUIT NJW1168 TERMINAL VOLTAGE Tone Control Treble switching noise rejection Capacitor Tone Control Bass switching noise rejection Capacitor V+/2 36k 16 CVa 27 CVb 26 CVw 36 LF2 37 LF3 Ach Volume switching noise rejection Capacitor Bch Volume switching noise rejection Capacitor SWch Trimmer switching noise rejection Capacitor 8k Low Pass Filter Capacitor 2 Low Pass Filter Capacitor 3 V+/2 4k + V /2+0.7V 7 LF1 Low Pass Filter Capacitor 1 V+/2 24k -11- PRELIMINARY NJW1168 PIN NO. SYMBOL 6 CMON FUNCTION EQUIVALENT CIRCUIT TERMINAL VOLTAGE MONa/b switching noise rejection Capacitor 36k 0V, 5V 34 DCC2 Coupling Capacitor 2 14k V+/2 9 VE-FIL3 Voice Enhancement Filter Capacitor 3 FB V+/2 10 VE-FIL2 Voice Enhancement Filter Capacitor 2 V+/2 48k -12- PRELIMINARY PIN NO. SYMBOL 11 VE-FIL1 FUNCTION NJW1168 EQUIVALENT CIRCUIT TERMINAL VOLTAGE Voice Enhancement Filter Capacitor 1 FB V+/2 24k -13- PRELIMINARY NJW1168 ■ LPF Characteristics Secondary LPF GmAmp2 Buffer2 Primary LPF GmAmp3 LF2 C2 Buffer3 R1 24k LF3 C3 LF1 C1 The NJW1168 includes the LPF for subwoofer output and bass boost function. The LPF consists of primary and secondary LPF and it is enable to adjust “cut off frequency”, “Q” and “Roll off”. The expression of LPF characteristics is as follows. <Primary LPF> f c1 = 1 1 = 2π * R * C1 2π * 24 *10 3 * C1 Q1 = 0.5 <Secondary LPF> f c2 = 42.9 ∗10 −6 Q 2 = 1.46 * 2π C 2 ∗ C 3 C3 C2 <LPF Frequency Response> C2 = 47nF, C3 = 22nF C1 = 33nF, C3 = 22nF 5 5 C1=22nF 0 -15 C2=68nF Gain[dB] Gain[dB] Gain[dB] -10 -5 C2=100nF -10 -15 0.1 Frequency [kHz] 1 -20 C3=33nF 0 C2=47nF C1=47nF C1=68nF -14- C2=33nF 0 C1=33nF -20 C3=47nF C2=22nF C1=15nF -5 C1 = 33nF, C2 = 47nF 5 -5 C3=22nF C3=15nF C3=10nF -10 -15 0.1 Frequency [kHz] 1 -20 0.1 Frequency [kHz] 1 PRELIMINARY NJW1168 2 ■ DEFINITION OF I C REGISTER 2 ♦I C BUS FORMAT MSB S LSB Slave Address 1bit 8bit MSB LSB A Select Address 1bit 8bit MSB LSB A 1bit Data A P 8bit 1bit 1bit S: Starting Term A: Acknowledge Bit P: Ending Term ♦SLAVE ADDRESS Slave Address Hex MSB 1 0 0 0 0 0 0 LSB - 0 80(h) ♦CONTROL REGISTER TABLE The select address sets each function (Volume, Balance, Trimmer, Bass Boost Select, Tone Control, Surround, AGC, Voice Enhancement, Input Selector, Monitor Out, AUX). The auto increment function cycles the select address as follows. 00H→01H→02H→03H→04H→05H→06H→00H <Write Mode> Select Address 00H 01H 02H 03H 04H 05H 06H BIT D7 D6 D4 D5 D3 D2 D1 D0 VOL BAL CHS ✴ BBSW TRIM BASS TREB BCB BCT ✴ ✴ SUR VE AGC MOSW AUX1 AUX0 SEL ✴ : Don’t Care ♦CONTROL REGISTER DEFAULT VALUE Control register default value is all “0”. BIT Select Address D7 D6 D5 D4 D3 D2 D1 D0 00H 01H 02H 03H 04H 05H 06H 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -15- PRELIMINARY NJW1168 INSTRUCTION CODE a) MASTER VOLUME SETTING Select Address BIT D7 D6 D5 D4 D3 D2 D1 D0 00H VOL •VOL Attenuation level : 0 to –80dB(0.33dB/step) , MUTE The attenuator is consisted of both the VOL1(0.165dB/step)and VOL2(0.165dB/step) and is enable to adjust 0.33dB/step. The attenuation for both the VOL1and VOL2 are always synchronized to have the same attenuation levels for each other, and are not controllable independently for each other. ex) VOL(-30dB) = VOL1(-15dB) + VOL2(-15dB) b) BALANCE SETTING BIT Select Address D7 01H CHS D6 D5 D4 D3 D2 D1 BAL D0 Don’t Care •CHS : Channel select for balance control “0” : Ach “Bch is attenuated” “1” : Bch “Ach is attenuated” •BAL : Balance control for both Ach and Bch Balance Level : 0 to –60dB (0.5dB/Step) , MUTE c) TRIMMER LEVEL AND BASS BOOST FUNCTION SETTING Select Address BIT D7 D6 D5 D4 D3 D2 D1 02H TRIM •TRIM : Trimmer Level Trimmer Level : +30 to –6dB (0.5dB/Step) , MUTE •BBSW : Bass Boost ON/OFF Switch “0” = Bass Boost OFF “1” = Bass Boost ON D0 BBSW d) TONE CONTROL BASS SETTING BIT Select Address D7 03H BCB D6 D5 D4 D3 D2 D1 BASS D0 Don’t Care •BCB : Boost cut select for Bass control “0” : Cut “1” : Boost •BASS : BASS Level Setting Cut Level : -15 to 0dB(0.5dB/Step) Boost Level : 0 to +15dB(0.5dB/Step) e) TONE CONTROL TREBLE SETTING BIT Select Address D7 04H BCT D6 D5 •BCT : Boost cut select for Treble control “0” : Cut “1” : Boost •TREB : TREBLE Level Setting Cut Level : -15 to 0dB(0.5dB/Step) Boost Level : 0 to +15dB(0.5dB/Step) -16- D4 TREB D3 D2 D1 D0 Don’t Care PRELIMINARY NJW1168 f) Surround, AGC LEVEL SETTING Select Address BIT D7 D6 05H D4 D5 D3 D2 SUR D1 D0 AGC <SUR : Surround Level Setting> Surround Setting Bypass Simulated Stereo eala Effect1 eala Effect2 eala Effect3 D7 0 0 0 0 1 D6 0 0 1 1 0 D5 0 1 0 1 0 Remarks Bypass Simulated Stereo Surround Effect Low(8.3dB typ.) Surround Effect Mid(12.7dB typ.) Surround Effect High(16dB typ.) <AGC : AGC Setting> •AGC ON/OFF AGC OFF ON D4 0 1 •AGCBST1 : AGC Boost Start Point AGCBST1 Low (20mVrms Input) High (100mVrms Input) D3 0 1 •AGCBST2 : AGC Boost Gain AGCBST2 Low (3dB) High (6dB) D2 0 1 •AGCFLT : AGC Flat Level AGCFLT 200mV 350mV 500mV 650mV D1 0 0 1 1 D0 0 1 0 1 g) Input Selector, Monitor Out Switch, AUXILIARY SETTING Select Address BIT D7 05H D5 D4 MOSW AUX1 D6 VE D3 D2 AUX0 D1 D0 SEL <VE : Voice Enhancement Setting> VE Setting By-Pass VE Effect 1 VE Effect 2 D7 0 0 1 D6 0 1 0 Remarks Bypass Voice Enhancement Effect Low(9dB typ.) Voice Enhancement Effect Mid(10dB typ.) VE Effect 3 1 1 Voice Enhancement Effect High(13dB typ.) <MOSW : Monitor Output Setting> MOSW Setting Signal Output Mute D5 0 1 -17- PRELIMINARY NJW1168 <AUX1 : AUX1 Terminal Setting> Auxiliary Setting Low (0.0V) High (5.0V) D4 0 1 <AUX0 : AUX0 Terminal Setting> Auxiliary Setting Low (0.0V) Mid (2.5V) High (5.0V) D3 0 1 D2 0 1 1 SEL Setting Input 1 Input 2 Input 3 D1 0 0 1 D0 0 1 0 Input 4 1 1 <SEL : Input Selector Setting> -18- PRELIMINARY NJW1168 ■Master Volume (Select Address : 00H) VOL Gain(dB) HEX D7 D6 D5 D4 D3 D2 D1 D0 0 -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 -22 -23 -24 -25 -26 -27 -28 -29 -30 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 FF FC F9 F6 F3 F0 ED EA E7 E4 E1 DE DB D8 D5 D2 CF CC C9 C6 C3 C0 BD BA B7 B4 B1 AE AB A8 A5 A2 9F 9C 99 96 93 90 8D 8A 87 84 81 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 -19- PRELIMINARY NJW1168 VOL Gain(dB) HEX D7 D6 D5 D4 D3 D2 D1 D0 -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 -56 -57 -58 -59 -60 -61 -62 -63 -64 -65 -66 -67 -68 -69 -70 -71 -72 -73 -74 -75 -76 -77 -78 -79 -80 MUTE✴ 7E 7B 78 75 72 6F 6C 69 66 63 60 5D 5A 57 54 51 4E 4B 48 45 42 3F 3C 39 36 33 30 2D 2A 27 24 21 1E 1B 18 15 12 0F 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 1 1 1 1 1 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 1 1 0 0 0 1 1 0 0 0 1 1 1 0 0 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 1 0 1 0 0 1 0 1 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 ✴ : Default Value -20- PRELIMINARY NJW1168 ■Balance Setting (Select Address : 01H) Channel Setting (CHS) D7 Decrease Bch Gain Decrease Ach Gain 0 1 Gain(dB) BAL D6 D5 D4 D3 D2 D1 0✴ -1 -2 -3 -4 -5 -6 -7 -8 -9 -10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 -11 -12 -13 -14 -15 -16 -17 -18 -19 -20 -21 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 1 0 1 -22 -23 0 0 1 1 0 0 1 1 1 1 0 1 -24 -25 -26 -27 -28 -29 -30 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 1 1 1 0 0 1 1 0 0 1 0 1 0 1 0 1 0 ✴ : Default Value -21- PRELIMINARY NJW1168 Gain(dB) -22- BAL D5 D4 D3 D2 D1 -31 -32 -33 -34 -35 -36 -37 -38 -39 -40 -41 -42 -43 -44 -45 -46 -47 -48 -49 -50 -51 -52 -53 -54 -55 D6 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 -56 -57 1 1 1 1 1 1 0 0 0 0 0 1 -58 -59 -60 MUTE 1 1 1 1 1 1 1 1 1 1 1 1 0 0 1 1 1 1 0 1 0 1 0 1 PRELIMINARY NJW1168 ■Trimmer Setting (Select Address: 02H) TRIM Gain(dB) D7 D6 D5 D4 D3 D2 D1 +30.0 +29.5 +29.0 +28.5 +28.0 +27.5 +27.0 +26.5 +26.0 +25.5 +25.0 +24.5 +24.0 +23.5 +23.0 +22.5 +22.0 +21.5 +21.0 +20.5 +20.0 +19.5 +19.0 +18.5 +18.0 +17.5 +17.0 +16.5 +16.0 +15.5 +15.0 +14.5 +14.0 +13.5 +13.0 +12.5 +12.0 +11.5 +11.0 +10.5 +10.0 +9.5 +9.0 +8.5 +8.0 +7.5 +7.0 +6.5 +6.0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 -23- PRELIMINARY NJW1168 TRIM Gain(dB) D7 D6 D5 D4 D3 D2 D1 +5.5 +5.0 +4.5 +4.0 +3.5 +3.0 +2.5 +2.0 +1.5 +1.0 +0.5 0.0 -0.5 -1.0 -1.5 -2.0 -2.5 -3.0 -3.5 -4.0 -4.5 -5.0 -5.5 -6.0 MUTE✴ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 0 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 ✴ : Default value ■Bass Boost Setting (Select Address: 02H) Bass Boost Setting (BBSW) D0 Bass Boost Off Bass Boost On 0 1 ✴ ✴ : Default Value -24- PRELIMINARY NJW1168 ■Tone Control(Bass Setting) (Select Address : 03H) Bass Cut or Boost BCB D7 Cut Boost 0 1 BASS Cut Gain(dB) Boost Gain(dB) D6 D5 D4 D3 D2 -15.0 -14.5 -14.0 -13.5 -13.0 -12.5 -12.0 -11.5 -11.0 -10.5 -10.0 -9.5 -9.0 -8.5 -8.0 -7.5 -7.0 -6.5 -6.0 -5.5 -5.0 -4.5 -4.0 -3.5 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0✴ 15.0 14.5 14.0 13.5 13.0 12.5 12.0 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0✴ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 1 0 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0 ✴ : Default value -25- PRELIMINARY NJW1168 ■Tone Control(Treble Setting) (Select Address : 04H) Treble Cut or Boost BCT D7 Cut Boost 0 1 TREB Cut Gain(dB) Boost Gain(dB) D6 D5 D4 D3 D2 -15.0 -14.5 -14.0 -13.5 -13.0 -12.5 -12.0 -11.5 -11.0 -10.5 -10.0 -9.5 -9.0 -8.5 -8.0 -7.5 -7.0 -6.5 -6.0 -5.5 -5.0 -4.5 -4.0 -3.5 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5 0.0✴ 15.0 14.5 14.0 13.5 13.0 12.5 12.0 11.5 11.0 10.5 10.0 9.5 9.0 8.5 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0✴ 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 0 0 0 1 0 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 0 0 0 0 ✴ : Default value -26- PRELIMINARY NJW1168 ■TYPICAL CHARACTERISTICS fig.2 Supply Current vs Temperature fig.1 Supply Current vs Supply Voltage Rg=600Ω Ω ,RL=47k Ω 20 V =9V,Rg=600 Ω ,R =47k Ω + L 20 o Ta = 75 C 15 15 o o Ta = -20 C 10 Icc [mA] Icc [mA] Ta = 25 C 10 5 5 0 0 0 5 10 -40 15 0 40 60 80 100 120 fig.4 Reference Voltage vs Temperature Rg=600Ω Ω ,R =47k Ω L 10 20 Ta [o C] V+ [V] fig.3 Reference Voltage vs Supply Voltage V =9V,Rg=600 Ω,R Ω, =47k Ω + L 5 8 4.8 6 o o 4.6 o Ta = -20 C, 25 C, 75 C Vref [V] Vref [V] -20 4 2 4.4 4.2 0 0 5 10 4 15 -40 + V [V] fig.5 Voltage Gain vs Volume Control -20 0 20 40 60 80 100 120 Ta [o C] fig.6 Voltage Gain vs Balance Control V =9V, Vin(Ach)=1Vrms, f=1kHz, Rg=600 Ω, Vout(Ach), R =47k Ω ,BW=400Hz-30kHz + + V =9V, Vin(A+Bch)=1Vrms, f=1kHz, Ω , BW=400Hz-30kHz Rg=600Ω Ω, R =47kΩ L L 0 0 Ach+Bch in -> Ach out Ach+Bch in -> Bch out -20 -20 Ach+Bch in -> Ach out Ach+Bch in -> Bch out -40 Gv [dB] Gv [dB] -40 -60 -80 o o o o o Ta = -20 C, 25 C, 75 C -60 o Ta = -20 C, +25 C, +75 C -80 -100 -100 0 50 100 150 200 250 0 Volume Control [dec] 20 40 60 80 100 120 Balance Control [dec] -27- PRELIMINARY NJW1168 ■TYPICAL CHARACTERISTICS fig.8 THD+N vs Input Voltage(Ach,Bch) fig.7 Voltage Gain vs Trimmer Control V =9V, Vin(Ach), f=1kHz, Rg=600 Ω , Vout(Ach), R =47k Ω , BW=400Hz-30kHz, VOL=-20dB + + V =9V, Vin(A+Bch)=0.05Vrms, f=50Hz, Rg=600Ω Ω, R L=47k Ω, BW=10Hz-30kHz 100 L 20 10 THD+N [%] Gv [dB] 0 -20 o o o Ta =-20 C, +25 C, +75 C -40 1 o Ta=25 C o Ta=-20 C o Ta=75 C 0.1 -60 -80 0 20 40 60 80 100 0.01 0.01 120 10 Vi [Vrms] fig.10 THD+N vs Input Voltage (Ach, Bch) V =9V, Vin(A+Bch), f=50Hz, Rg=600 Ω , Vout(Wch), R =47k Ω , BW=10Hz-30kHz, VOL=-20dB, TRIM =+18dB L Ta=25 C, V =9V, Vin(Ach), f=1kHz, Rg=600 Ω , Vout(Ach), R =47k Ω , BW=400Hz-30kHz o + L 100 10 10 1 THD+N [%] THD+N [%] 1 Trimmer Control [dec] fig.9 THD+N vs Input Voltage (Wch) + 100 0.1 o Ta=25 C o Ta=-20 C VOL=0dB VOL=-30dB VOL=-10dB, -20dB, -30dB VOL=-20dB 1 VOL=-10dB VOL=0dB o Ta=75 C 0.1 0.01 0.01 0.1 0.01 0.01 10 0.1 1 10 Vi [Vrms] fig.11 THD+N vs Input Voltage (Wch) Vi [Vrms] fig.12 THD+N vs Output Voltage (Ach, Bch) Ta=25 C, V =9V, Vin(A+Bch), f=50Hz, Rg=600 Ω , Vout(Wch), R =47k Ω, BW=10Hz-30kHz, VOL=-20dB V =9V, Vin(Ach), f=1kHz, Rg=600 Ω , Vout(Ach), R =47k Ω , BW=400Hz-30kHz, VOL=0dB o 100 1 0.1 + + 10 L L TRIM=+30dB 10 TRIM=+10dB, +20dB 1 TRIM=+10dB THD+N [%] THD+N [%] 1 o Ta=-20 C o Ta=25 C 0.1 TRIM=+20dB o Ta=75 C 0.1 TRIM=+30dB 0.01 0.01 0.1 1 Vi [Vrms] -28- 10 0.01 0.01 0.1 1 Vo [Vrms] 10 PRELIMINARY NJW1168 ■TYPICAL CHARACTERISTICS fig.13 THD+N vs OutPut Voltage (Wch) fig.14 Maximum Input Voltage vs Supply Voltage V =9V, Vin(A+Bch), f=50Hz, Rg=600 Ω , Vout(Wch), R =47k Ω , BW=10Hz-30kHz, VOL=0dB, TRIM=+18dB Vin(Ach) f=1kHz, Vout(Ach), Rg=600Ω Ω , BW=400Hz-30kHz, THD=1%, VOL=-20dB + 100 6 L o o o Ta = -20 C, 25 C, 75 C 5 Vinmax [Vrms] THD+N [%] 10 1 4 3 2 o Ta=-20,25,75 C 0.1 1 0 0.01 0.01 0.1 1 0 10 5 Vin(Ach) f=1kHz, Vout(Ach), Rg=600Ω Ω , BW=400Hz-30kHz, THD=1%, VOL=0dB + V =9V, Vin(Ach) f=1kHz, Vout(Ach), Rg=600 Ω , BW=400Hz-30kHz, THD=1%, VOL=-20dB 6 5 5 Vomax [Vrms] 4 Vinmax [Vrms] 15 V+ [V] fig.16 Maximum Output Voltage vs Supply Voltage Vo [Vrms] fig.15 Maximum Input Voltage vs Temperature 6 10 3 2 4 o o o Ta = -20 C, 25 C, 75 C 3 2 1 1 0 0 -40 -20 0 20 40 60 80 100 0 120 5 10 15 + V [V] fig.18 AGC Characteristics (Flat level) Ta [o C] fig.17 Maximum Output Voltage vs Temperature V =9V, Vin(A+Bch), f=1kHz, Rg=600 Ω , Vout(Ach), R =47k Ω , BW=400Hz-30kHz, VOL=0dB, + + V =9V, Vin(Ach) f=1kHz, Vout(Ach), Rg=600Ω Ω , BW=400Hz-30kHz, THD=1%, VOL=0dB 6 L o AGC Bst1=Low, AGC Bst2=+3dB, Ta=25 C 10 AGC_off 5 AGC Flat level=650mV AGC Flat level=500mV AGC Flat level=350mV Vo [Vrms] Vomax [Vrms] 1 4 3 AGC Flat level=200mV 0.1 2 0.01 1 0 -40 -20 0 20 40 Ta [oC] 60 80 100 120 0.001 0.001 0.01 0.1 1 Vi [Vrms] -29- PRELIMINARY NJW1168 ■TYPICAL CHARACTERISTICS fig.20 AGC Characteristics (Bst2) fig.19 AGC Characteristics (Bst1) V =9V, Vin(A+Bch), f=1kHz, Rg=600Ω , Vout(Ach), RL=47kΩ Ω , BW=400Hz-30kHz, VOL=0dB, AGC Flat=500mV, + + V =9V, Vin(A+Bch), f=1kHz, Rg=600 Ω , Vout(Ach), R =47k Ω, BW=400Hz-30kHz, VOL=0dB, L 10 AGC Bst1=Low, Ta=25oC 10 o AGC Flat=500mV, AGC Bst2=+3dB, Ta=25 C AGC_off AGC_off 1 AGC Bst2=+6dB AGC Bst2=+3dB Vo [Vrms] Vo [Vrms] 1 AGC Bst1=High 0.1 0.1 AGC Bst1=Low 0.01 0.01 0.001 0.001 0.001 0.001 0.01 0.1 0.01 0.1 1 1 Vi [Vrms] fig.22 AGC Characteristics (Attack) Vi [Vrms] fig.21 AGC Characteristics (Ta) V+=9V, Vin(A+Bch)=1Vrms, f=10kHz, Rg=600Ω , Vout(Ach), R =47kΩ Ω, V +=9V, Vin(A+Bch), f=1kHz, Rg=600Ω, Vout(Ach), R =47kΩ, Ω, L L VOL=0dB, R BW=400Hz-30kHz, VOL=0dB, AGC Flat=500mV, AGC Bst1=Low, AGC Bst2=+3dB =100kΩ Ω , C =330nF , AGC level=200mV, Ta=25oC EXT EXT 3 10 AGC_off 2 1 o o o Ta=-25 C, +25 C, +75 C Vo [Vrms] Vo [Vrms] 1 0.1 0 -1 0.01 -2 -3 0.001 0.001 0.01 0.1 0 1 2 6 8 Vi [Vrms] time [msec] fig.23 AGC Characteristics (Recovery) fig.24 Crosstalk vs Frequency L L =100kΩ Ω , C =330nF , AGC level=200mV, Ta=25oC EXT EXT VOL=0dB, R 100 o 80 0.1 o o o Crosstalk [dB] Ta=-20 C, +25 C, +75 C 0.05 0 -0.05 -0.1 Rg=600Ω Ω 60 40 20 -0.15 0 -0.2 0 0.1 0.2 0.3 time [sec] -30- 0.4 0.5 o Ta=-20 C, +25 C Rg=0Ω Ω o Ta=+75 C 0.15 Vo [Vrms] 10 V+=9V, Vin(Ach IN2,IN3,IN4)=1Vrms, SEL=IN1 Ω , VOL=0dB Vout(Ach), R =47kΩ V+=9V, Vin(A+Bch)=1Vrms, f=10kHz, Rg=600Ω , Vout(Ach), R =47kΩ Ω, 0.2 4 0.1 1 Frequency [kHz] 10 PRELIMINARY NJW1168 ■TYPICAL CHARACTERISTICS fig.25 Channel Separation vs Frequency fig.26 Voltage Gain vs Frequency (MUTE) V =9V, Vin(Ach)=1Vrms, Rg=600Ω Ω, Ω , VOL=0dB Vout(Bch), R =47kΩ + V +=9V, Vin(A+Bch)=1Vrms, Rg=600Ω , Ω , VOL=MUTE Vout(Ach),(Wch), R =47kΩ L L 0 100 o o o -20 80 -40 60 Gv [dB] Channel Separation [dB] Ain-Bout, Bin-Aout, Ta=-20 C, +25 C, +75 C -60 40 Wch, o o o Ta=-20 C, +25 C, +75 C -80 Ach, 20 o o o Ta=-20 C, +25 C, +75 C -100 0 0.1 1 0.1 10 o o o 10 Frequency [kHz] Ta=-20 C, +25 C, +75 C Frequency [kHz] fig.27 Output Noise vs Temperature fig.28 Wch Voltage Gain v s Frequency (Trimmer) + V =9V, Vin(A+Bch)=0.05Vr ms, Rg=600 Ω , Vout(Wch), R L=47kΩ Ω, V +=9V, Rg=600Ω Ω , R =47kΩ Ω, L Vo=(Ach),(Wch),(MONAch), filter : A-Weighted o C VOL=0dB, C1=33nF, C2=47nF, C3=22nF, Ta=25 40 0 TRIMMER=+30dB 20 TRIMMER=+20dB TRIMMER=+10dB -20 0 TRIMMER=0dB -40 Gv [dB] Output Noise [dBV] 1 MONAch, MONSW = MUTE, -60 Wch, VOL=0dB, TRIM=+30dB -20 -40 Ach, VOL=0dB -80 -60 TRIMMER=MUTE Ach, VOL=MUTE MONAch -100 -80 Wch, VOL=MUTE, TRIM=+30dB -120 -40 -20 0 20 40 60 80 100 -100 0.1 120 1 10 Frequency [kHz] fig.30 LPF Characteristics (C1) Ta [o C] fig.29 Wch Voltage Gain v s Frequency (Ta) + V =9V, Vin(A+Bch)=0.1Vrms, Rg=600 Ω , Vout(Wch), R =47k Ω , L V =9V, Vin(A+Bch)=0.05Vr ms, Rg=600 Ω , Vout(Wch), R =47kΩ Ω, + VOL=0dB, TRIM=0dB, C2=47nF, C3=22nF, Ta=25 L 40 VOL=0dB, TRIM=+30dB, C1=33nF, C2=47nF, C3=22nF C C1=15nF C1=22nF Ta=-20 o C, +25 o C, +75 oC 20 o 5 0 0 -20 Gv [dB] Gv [dB] C1=33nF -40 -5 C1=47nF C1=68nF -10 -60 -15 -80 -100 0.1 1 10 -20 0.1 Frequency [kHz] 1 Frequency [kHz] -31- PRELIMINARY NJW1168 ■TYPICAL CHARACTERISTICS fig.32 LPF Characteristcs (C3) fig.31 LPF Characteristics (C2) V +=9V, Vin(A+Bch)=0.1Vrms, Rg=600 Ω , Vout(Wch), R =47kΩ Ω, V +=9V, Vin(A+Bch)=0.1Vrms, Rg=600 Ω , Vout(Wch), R =47k Ω , L L o C VOL=0dB, TRIM=0dB, C1=33nF, C2=47nF, Ta=25 o VOL=0dB, TRIM=0dB, C1=33nF, C3=22nF, Ta=25 C 5 5 C3=33nF C3=47nF C3=22nF C2=22nF 0 0 C2=47nF -5 Gv [dB] Gv [dB] C2=33nF C2=68nF C2=100nF -10 -5 C3=10nF -10 -15 -15 -20 -20 0.1 0.1 1 1 Frequency [kHz] Frequency [kHz] fig.33 Voltage Gain vs Frequency (Tone) fig.34 Voltage Gain vs Frequency (Tone) V =9V, Vin(A)=0.1Vrms, Rg=600Ω Ω , Vout(Ach), + V+=9V, Vin(A)=0.1Vrms, Rg=600Ω Ω , Vout(Ach), RL=47kΩ Ω , VOL=0dB Ω , VOL=0dB, Ta=25o C R =47kΩ L 20 20 BASS=TREB=+15dB 15 10 10 BASS=TREB=+9dB BASS=TREB=+6dB BASS=TREB=+3dB BASS=TREB=0dB 0 BASS=TREB=-3dB -5 BASS=TREB=+15dB Ta=-20oC 5 Gv [dB] 5 o Ta=+25 C Ta=+75oC 15 BASS=TREB=+12dB Gv [dB] C3=15nF BASS=TREB=0dB 0 -5 BASS=TREB=-6dB BASS=TREB=-9dB -10 -10 BASS=TREB=-12dB BASS=TREB=-15dB -15 BASS=TREB=-15dB -15 o 0.1 1 0.1 10 o o Ta=-20 C, +25 C, +75 C -20 -20 1 10 Frequency [kHz] fig.36 Voltage Gain vs Frequency (eala effect2) Frequency [kHz] fig.35 Voltage Gain vs Frequency (eala effect1) V +=9V, Vin=0.1Vrms, Rg=600Ω Ω, RL=47kΩ Ω , VOL=0dB V +=9V, Vin=0.1Vrms, Rg=600Ω Ω, RL=47kΩ Ω , VOL=0dB 20 20 Vin(Ach) -> Vout(Ach) Vin(Ach) -> Vout(Ach) 10 10 Vin(Ach) -> Vout(Bch) o o o o Vin(Ach) -> Vout(Bch) o o 0 -10 -10 -20 -20 o o o Ta=-20 C, +25 C, +75 C -30 -30 0.1 1 Frequency [kHz] -32- o Ta=-20 C, +25 C, +75 C Gv [dB] Gv [dB] Ta=-20 C, +25 C, +75 C 0 10 0.1 o Ta=-20 C, +25 C, +75 C o 1 Frequency [kHz] 10 PRELIMINARY ■TYPICAL CHARACTERISTICS NJW1168 fig.38 Voltage Gain vs Frequency (Simulated Stereo) fig.37 Voltage Gain vs Frequency (eala effect3) V+=9V, Vin=0.1Vrms, Rg=600Ω Ω, RL=47kΩ Ω , VOL=0dB V +=9V, Vin=0.1Vrms, Rg=600Ω Ω, R =47kΩ Ω , VOL=0dB L 20 20 Vin(Ach) ->Vout(Ach) Vin(Ach) -> Vout(Bch) 10 o o 10 o Ta=-20 C, +25 C, +75 C Vin(A+Bch) -> Vout(Ach) o o Gv [dB] Gv [dB] Vin(A+Bch) -> Vout(Bch) 0 o Ta=-20 C, +25 C, +75 C -10 -20 o o o o o Ta=-20 C, +25 C, +75 C 0 -10 -20 -30 0.1 1 -30 10 0.1 1 10 Frequency [kHz] fig.39 Phase vs Frequency (Simulated Stereo) Frequency [kHz] fig.40 Voltage Gain vs Frequency (Voice Enhancement) V +=9V, Vin=0.1Vrms, Rg=600Ω Ω, Ω , VOL=0dB R =47kΩ V +=9V, Vin(A+B)=0.1Vrms, Vout(Ach), Rg=600Ω , RL=47kΩ Ω , VOL=0dB, Ta=25o C L 200 20 Vin(A+Bch) -> Vout(Bch) 150 o o 15 o VE effect 3 Ta=-20 C, +25 C, +75 C VE effect 2 10 100 VE effect 1 Vin(A+Bch) -> Vout(Ach) o o 5 o Ta=-20 C, +25 C, +75 C Gv [dB] Phase [deg] o Ta=-20 C, +25 C, +75 C 50 0 Bypass -5 0 -10 -50 -15 -100 0.1 1 -20 10 0.1 Frequency [kHz] 1 10 Frequency [kHz] fig.41 Voltage Gain vs Frequency (Voice Enhancement) 20 V +=9V, Vin(A+B)=0.1Vrms, Vout(Ach), Rg=600Ω , Ω , VOL=0dB, VE effect 3 R =47kΩ L o 15 o o Ta=-20 C, +25 C, +75 C 10 Gv [dB] 5 0 Bypass -5 -10 -15 -20 0.1 1 10 Frequency [kHz] -33- NJW1168 PRELIMINARY ■NOTE 2 Purchase of I C components of New Japan Radio Co., Ltd or one of its sublicensed Associated Companies 2 2 conveys a license under the Philips I C Patent Rights to use these components in an I C system, provided that 2 the system conforms to the I C Standard Specification as defined by Philips. [CAUTION] The specifications on this databook are only given for information , without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. -34-