AZ AZ673 MINIATURE POWER RELAY FEATURES • Compact size for dense PCB layouts • High power contacts (10A) for use in consumer appliances, HVAC, TV • Withstands surges of up to 10,000 volts • Epoxy sealed version available • Insulation Class B standard • UL/CUR file E44211 • TÜV file R2134653 GENERAL DATA CONTACTS Arrangement SPST – N.O., SPDT Ratings Non - inductive load: Max. switched power: 300 W or 2500 VA Max. switched current: 10A Max. switched voltage: 150* VDC or 250 VAC *Note: If switching voltage is greater than 30 VDC, special precautions must be taken. Please contact the factory. Rated Load UL, CUR, Life Expectancy Mechanical Electrical 1 x 107 1 x 105 at 10 A 240 VAC Res. Operate Time (typical) 15 ms at nominal coil voltage Release Time (typical) 5 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1000 Vrms contact to contact (at sea level for 1 min.) 4000 Vrms N.O. contact to coil 3000 Vrms N.C. contact to coil 10,000 V surge contact to coil 10 A at 250 VAC, general use, 100k 10 A at 30 VDC resistive, 100K 1/8 HP at 125 VAC 1/4 HP at 250 VAC TV-5 at 125 VAC (1 Form A only) 10 A at 250 VAC resistive, 100k 10 A at 30 VDC resistive, 100k Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout 5% of nominal coil voltage Material Silver cadmium oxide or silver tin oxide Ambient Temperature Operating Resistance < 100 milliohms initially (6 V, 1A voltage drop method) TÜV COIL Power Storage -40°C (-40°F) to 80°C (176°F) -40°C (-40°F) to 105°C (221°F) sensitive coil -40°C (-40°F) to 130°C (266°F) Vibration 1.5mm DA at 10–55 Hz Shock 10 g Enclosure Plastic At Pickup Voltage (typical) 300 mW standard coil 140 mW sensitive coil Terminals PC, tinned Max. Continuous Dissipation 1.2 W at 20°C (68°F) ambient Max. Solder Temp. 250°C (482°F) Temperature Rise 48°C (86°F) at nominal coil voltage, std. coil 22°C (40°F) at nominal coil voltage, sens. coil Max. Solder Time 5 seconds Max. Solvent Temp. 80°C Max. Immersion Time 30 seconds Weight 12 grams Temperature Max. 130°C (266°F) NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. 4. Specifications subject to change without notice. 3/24/04W AZ AZ673 RELAY ORDERING DATA COIL SPECIFICATIONS — STANDARD COIL ORDER NUMBER* Nominal Coil VDC 5 Must Operate VDC 3.75 Max. Continuous VDC 7.5 6 4.50 9.0 9 6.75 13.6 12 9.00 18.0 Coil Resistance ±10% 47 1 Form A 1 Form C AZ673–1A–5D AZ673–1C–5D 68 AZ673–1A–6D AZ673–1C–6D 155 AZ673–1A–9D AZ673–1C–9D 270 AZ673–1A–12D AZ673–1C–12D 18 13.5 27.3 620 AZ673–1A–18D AZ673–1C–18D 24 18.0 36.0 1080 AZ673–1A–24D AZ673–1C–24D 48 36.0 72.7 4400 AZ673–1A–48D AZ673–1C–48D COIL SPECIFICATIONS — SENSITIVE COIL ORDER NUMBER* Nominal Coil VDC 5 Must Operate VDC 3.75 6 4.50 13.2 145 AZ673–1A–6DS 9 6.75 19.7 325 AZ673–1A–9DS 9.00 12 Max. Continuous VDC 11.0 Coil Resistance ±10% 100 1 Form A AZ673–1A–5DS 26.3 575 AZ673–1A–12DS 18 13.5 39.5 1300 AZ673–1A–18DS 24 18.0 52.6 2310 AZ673–1A–24DS *For epoxy sealed version add suffix “E”. For silver tin oxide contacts add suffix “A”. MECHANICAL DATA PC BOARD LAYOUT A B C .650 [16.5] 5 x ø.051 [ø1.3] D .295 [7.5] .984 [25.0] .020 [0.5] OMIT FOR FORM A VERSION .138 [3.5] .138 [3.5] VIEWED TOWARD TERMINALS 5 x .158 [4.0] CIRCUIT DIAGRAM 5 x .031 [0.8] 2 x .012 [0.3] 5 3 x .016 [0.4] 4 5 4 TABLE I FORM C VERSION SHOWN DIM. LETTER A B C D DIM. SEALED INCHES .965 .413 .093 .059 MM 24.5 10.5 2.4 1.5 DIM. UNSEALED INCHES .937 .374 .079 .039 MM 23.8 9.5 2.0 1.0 1 2 3 1 FORM C 3 FORM A VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" 3/24/04W