MIG200Q2CSB1X Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 Compact IPM Series Dual Module 200 Amperes/1200 Volts A J P N D Q K E W E2 C1 F B S C C2E1 R DETAIL "A" E H L L M X AA Y Z SIGNAL TERMINAL T 1 2 3 4 V U FO(L) GND(L) IN(L) VD(L) 5 6 7 8 FO(H) GND(H) IN(H) VD(H) G 1 2 3 4 5 6 7 8 8 6 IN VD FO GND CC BB 3 1 OUT VS GND FO IN VD OUT VS GND GND 7 5 CC 4 2 CC E2 C2/E1 C1 DETAIL "A" Outline Drawing and Circuit Diagram Dimensions Inches A 4.21±0.04 B 2.16±0.04 C 1.42±0.03 D 3.66±0.01 E 0.37±0.03 F 2.05±0.02 G 4.09±0.02 H 0.29±0.03 J 0.47 K 0.35 L 0.87±0.03 M 1.15±0.03 N 0.28 P 1.32+0.04/-0.02 Rev. 8/05 Millimeters 107.0±1.0 55.0±1.0 36.0±0.8 93.0±0.3 9.5±0.8 52.0±0.5 104.0±0.5 7.5±0.8 12.0 9.0 22.0±0.8 29.24±0.8 7.0 33.5+1.0/-0.5 Dimensions Inches Millimeters Q 1.24±0.03 31.5±0.8 R 0.22 Dia. 5.5 Dia. S 0.6 15.24 T 0.87+0.04/-0.01 22.0+1.0/-0.3 U 0.73±0.03 18.5±0.8 V 0.89+0.04/-0.024 22.0+1.0/-0.6 W 0.55 13.9 X M5 Metric M5 Y 0.12 Dia. 3.0 Dia. Z 0.025 Sq. 0.64 Sq. AA 0.28 7.0 BB 1.0±0.024 25.4±0.6 CC 0.1 2.54 Description: Powerex Dual Compact IPM Series Modules are designed for use in switching applications. Each module consists of two IGBT Transistors in a half-bridge configuration, with each transistor having a reverse-connected super-fast recovery free-wheel diode. All components and interconnects are isolated from the heat sinking baseplate, offering simplified system assembly and thermal management. Features: £ Over-Current and Over-Temperature Protection £ Low VCE(sat) £ Isolated Baseplate for Easy Heat Sinking Applications: £ AC Motor Control £ Motion/Servo Control £ UPS £ Welding Power Supplies £ Laser Power Supplies Ordering Information: MIG200Q2CSB1X is a 1200V (VCES), 200 Ampere Compact IPM Series Dual Module. 1 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 MIG200Q2CSB1X Compact IPM Series Dual Module 200 Amperes/1200 Volts Absolute Maximum Ratings, Tj = 25°C unless otherwise specified Characteristics Power Device Junction Temperature Symbol MIG200Q2CSB1X Units Tj -20 to 150 °C Storage Temperature Tstg -40 to 125 °C Operating Temperature TC -20 to 100 °C Mounting Torque, M5 Mounting Screws — 31 in-lb Module Weight (Typical) — 278 Grams VISO 2500 Volts Isolation Voltage, AC 1 minute, 60Hz Sinusoidal IGBT Inverter Sector Supply Voltage (P-N Power Terminal) VCC 900 Volts Collector-Emitter Voltage VCES 1200 Volts Collector Current (TC = 25°C, DC) IC 200 Amperes Forward Current (TC = 25°C, DC) IF 200 Amperes Collector Power Dissipation (TC = 25°C) PC 2200 Watts VD 20 Volts IGBT Control Sector Control Supply Voltage (VD-GND Terminal) 2 Input Voltage (IN-GND Terminal) VIN 20 Volts Fault Output Voltage (FO-GND (L) Terminal) VFO 20 Volts Fault Output Current (FO Sink Current) IFO 14 mA Rev. 8/05 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 MIG200Q2CSB1X Compact IPM Series Dual Module 200 Amperes/1200 Volts Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units IGBT Inverter Sector Collector Cut-off Current Collector-Emitter ICEX VCE(sat) Saturation Voltage Forward Voltage VF VCE = 1200V, Tj = 25°C — — 1 mA VCE = 1200V, Tj = 125°C — — 10 mA VD = 15V, IC = 200A, VIN = 15V to 0V, Tj = 25°C — 2.2 2.6 Volts VD = 15V, IC = 200A, VIN = 15V to 0V, Tj = 125°C — — 3.0 Volts IF = 200A, Tj = 25°C ton Switching Time — 2.4 2.8 Volts — 2.0 3.0 µs tc(on) VCC = 600V, IC = 200A, — 0.3 — µs trr VD = 15V, VIN = 15V ↔ to 0V, — 0.3 — µs toff Tj = 25°C, Inductive Load tc(off) — 1.5 2.5 µs — 0.3 — µs — 13 17 mA Control Sector Control Circuit Current ID(H) High Side, VD = 15V ID(L) Low Side, VD = 15V — 13 17 mA Input-ON Signal Voltage VIN(on) VD = 15V 1.4 1.6 1.8 Volts Input-OFF Signal Voltage VIN(off) VD = 15V 2.2 2.5 2.8 Volts Fault Output Current IFO(on) Protection Current, VD = 15V 8 10 12 mA IFO(off) Normal Current, VD = 15V — — 0.1 mA Over-Current Protection Trip Level OC VD = 15V, Tj ≤ 125°C 320 — — Amperes Short-Circuit Current SC VD = 15V, Tj ≤ 125°C 320 — — Amperes Protection Trip Level Over-Current Cut-off Time toff(OC) — — 5 — µs Over-Temperature OT Trip Level Case Temperature 110 118 125 °C Protection OTr Reset Level Case Temperature — 98 — °C Control Supply Under UV Trip Level 11.0 12.0 12.5 Volts UVr Reset Level 12.0 12.5 13.0 Volts td(FO) VD = 15V 1 2 3 ms Voltage Protection Fault Output Pulse Width Rev. 8/05 3 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 MIG200Q2CSB1X Compact IPM Series Dual Module 200 Amperes/1200 Volts Thermal Characteristics Characteristic Symbol Condition Min. Typ. Max. Units Junction to Case Rth(j-c)Q IGBT (Per 1/2 Module) — — 0.062 °C/Watt Thermal Resistance Rth(j-c)D FWDi (Per 1/2 Module) — — 0.136 °C/Watt Rth(c-f) — — 0.017 — °C/Watt Symbol Condition Min. Typ. Max. Units VCC P-N Power Terminals — 600 800 Volts Control Supply Voltage VD VD-GND Signal terminal 13.5 15 16.5 Volts Switching Frequency fC PMW Control — — 20 kHz tDEAD — 5 — — µs Contact Thermal Resistance Recommended Conditions for Use Characteristic Supply Voltage Dead Time* *The table lists Dead Time requirements for the module input, excluding photocoupler delays. When specifying Dead Time requirements for the photocoupler input, please add photocoupler delays to the Dead Time given above. 4 Rev. 8/05 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 MIG200Q2CSB1X Compact IPM Series Dual Module 200 Amperes/1200 Volts OUTPUT CHARACTERISTICS (TYPICAL) 400 400 13V 200 100 0 1 2 3 4 0 1 2 3 4 200 100 0 5 0 1 2 3 4 FORWARD VOLTAGE, VF, (VOLTS) TURN-OFF TIME VS. COLLECTOR CURRENT (TYPICAL) TURN-ON TIME VS. COLLECTOR CURRENT (TYPICAL) TURN-OFF DELAY TIME VS. COLLECTOR CURRENT (TYPICAL) 50 100 150 200 0 50 100 150 200 SWITCHING TIME, tc(off), (µs) VCC = 600V VD = 15V Tj = 25°C Tj = 125°C 100 10-1 250 0 50 100 150 200 COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) TURN-ON DELAY TIME VS. COLLECTOR CURRENT (TYPICAL) SWITCHING LOSS (OFF) VS. COLLECTOR CURRENT (TYPICAL) SWITCHING LOSS (ON) VS. COLLECTOR CURRENT (TYPICAL) 102 100 50 100 150 200 COLLECTOR CURRENT, IC, (AMPERES) Rev. 8/05 VCC = 600V VD = 15V Tj = 25°C Tj = 125°C 10-1 250 VCC = 600V VD = 15V Tj = 25°C Tj = 125°C 0 100 250 101 VCC = 600V VD = 15V Tj = 25°C Tj = 125°C 100 250 102 0 50 100 150 200 COLLECTOR CURRENT, IC, (AMPERES) 250 SWITCHING LOSS, Eon, (mJ/PULSE) 0 SWITCHING TIME, ton, (µs) VCC = 600V VD = 15V Tj = 25°C Tj = 125°C 5 101 101 SWITCHING LOSS, Eoff, (mJ/PULSE) SWITCHING TIME, toff, (µs) 100 300 COLLECTOR-EMITTER VOLTAGE, VCE(sat), (VOLTS) 101 SWITCHING TIME, tc(on), (µs) 13V 200 Tj = 25°C Tj = 125°C COLLECTOR-EMITTER VOLTAGE, VCE(sat), (VOLTS) 100 10-1 VD = 17V 15V 0 5 101 10-1 300 FORWARD CURRENT, IF, (AMPERES) 15V VD = 17V 300 400 Tj = 125°C COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) Tj = 25°C 0 FREE-WHEEL CHARACTERISTICS (TYPICAL) OUTPUT CHARACTERISTICS (TYPICAL) 101 VCC = 600V VD = 15V Tj = 25°C Tj = 125°C 100 0 50 100 150 200 250 COLLECTOR CURRENT, IC, (AMPERES) 5 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 MIG200Q2CSB1X Compact IPM Series Dual Module 200 Amperes/1200 Volts 103 Tj = 25°C Tj = 125°C 0 50 100 150 200 102 101 250 0 50 CONTROL CIRCUIT CURRENT, ID(H), (mAMPERES) OVER CURRENT PROTECTION TRIP LEVEL, OC, (AMPERES) OVER CURRENT PROTECTION TRIP LEVEL VS. CASE TEMPERATURE (TYPICAL) 500 400 300 200 100 VD = 15V 0 0 25 50 75 100 125 150 200 100 VD = 15V Tj ≤ 125°C 0 250 0 400 800 1200 1600 HIGH SIDE CONTROL CIRCUIT CURRENT VS. CARRIER FREQUENCY (TYPICAL) LOW SIDE CONTROL CIRCUIT CURRENT VS. CARRIER FREQUENCY (TYPICAL) VD = 15V Tj = 25°C 40 30 20 10 0 200 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) 50 5 0 10 15 25 20 CARRIER FREQUENCY, fC, (kHz) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (FWDi) 50 VD = 15V Tj = 25°C 40 30 20 10 0 0 5 10 15 20 25 CARRIER FREQUENCY, fC, (kHz) 100 TC = 25°C TC = 25°C TRANSIENT IMPEDANCE, Rth(j-c) TRANSIENT IMPEDANCE, Rth(j-c) 150 CASE TEMPERATURE, TC, (°C) 100 10-1 10-2 10-3 SINGLE PULSE STANDARD VALUE = Rth(j-c)Q = 0.062°C/W 10-4 10-3 10-2 10-1 TIME, (s) 6 100 OC 300 FORWARD CURRENT, IF, (AMPERES) FORWARD CURRENT, IF, (AMPERES) 600 COLLECTOR CURRENT, IC, (AMPERES) 102 400 Tj = 25°C Tj = 125°C CONTROL CIRCUIT CURRENT, ID(L), (mAMPERES) 103 101 REVERSE BIAS SAFE OPERATION AREA (TYPICAL) REVERSE RECOVERY TIME (TYPICAL ) REVERSE RECOVERY TIME, trr, (ns) PEAK REVERSE RECOVERY CURRENT, Irr, (AMPERES) REVERSE RECOVERY CURRENT (TYPICAL ) 100 101 10-1 10-2 10-3 SINGLE PULSE STANDARD VALUE = Rth(j-c)D = 0.136°C/W 10-4 10-3 10-2 10-1 100 101 TIME, (s) Rev. 8/05