SAW Components SAW 2in1 filter TD-SCDMA 2100 / TD-SCDMA 1900 Series/type: Ordering code: B9816 B39202B9816P810 Date: Version: March 22, 2011 2.0 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B9816 2017.5/ 1900.0 MHz SAW 2in1 filter Data Sheet Application ■ ■ ■ ■ 2in1 RF filter for mobile telephone TD-SCDMA 2100 and TD-SCDMA 1900 systems Usable passband: Filter 1 (TD-SCDMA 2100): 15 MHz Filter 2 (TD-SCDMA 1900): 40 MHz Unbalanced to unbalanced operation for both filters Low amplitude ripple No matching network required for operation at 50Ω Features 0.21 1 2 3 0.18 4 10 5 9 8 7 6 0.39 0.49 bottom view 0.075 0.45 max. Package size 1.5 x1.1 x 0.4 mm3 RoHS compatible Approx. weight 0.003g Package for Surface Mount Technology (SMT) Ni, gold-plated terminals Electrostatic Sensitive Device (ESD) Moisture Sensitive Level 3 0.21 ■ ■ ■ ■ ■ ■ ■ 0.075 0.18 0.175 ■ Low-loss side view 1.1 1.5 top view Pin configuration ■ ■ ■ ■ ■ ■ 1 4 6 9 7,8 2,3,5,10 9 1 Input [Filter 1] Input [Filter 2] Output [Filter 2] Output [Filter 1] To be grounded Case-ground t.b.d. 6 4 2,3,5,10 Please read cautions and warnings and important notes at the end of this document. 2 March 22, 2011 8 7 SAW Components B9816 2017.5/ 1900.0 MHz SAW 2in1 filter Data Sheet Characteristics of Filter 1 (TD-SCDMA 2100) T = ZS = ZL = Temperature range for specification: Terminating source impedance: Terminating load impedance: -30 ˚C to +85 ˚C 50 Ω 50 Ω min. typ. @ 25˚C max. — 2017.5 — MHz — 1.7 2.6 dB MHz — 0.2 1.0 dB 2010.0 ... 2025.0 MHz — 1.3 2.0 2010.0 ... 2025.0 MHz — 1.3 2.0 Group delay ripple (p-p) 2010.0 ... 2025.0 MHz — 4 20 ns 38 33 14 4 3 15 23 28 28 34 25 44 39 22 11 18 19 27 32 36 40 37 — — — — — — — — — — — dB dB dB dB dB dB dB dB dB dB dB fC Center frequency Maximum insertion attenuation 2010.0 ... 2025.0 Amplitude ripple (p-p) 2010.0 ... 2025.0 αmax MHz ∆α Input VSWR Output VSWR α Attenuation 0 1840.0 1950.0 1980.0 2045.0 2050.0 2085.0 2120.0 2160.0 2500.0 4000.0 ... ... ... ... ... ... ... ... ... ... ... 1840.0 1950.0 1980.0 1990.0 2050.0 2085.0 2120.0 2160.0 2500.0 4000.0 6000.0 Please read cautions and warnings and important notes at the end of this document. MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz 3 March 22, 2011 SAW Components B9816 2017.5/ 1900.0 MHz SAW 2in1 filter Data Sheet Maximum ratings of Filter 1 Operable temperature range T –40/+85 ˚C Storage temperature range Tstg –40/+85 ˚C DC voltage VDC 3 V ESD voltage VESD 501) V 6 dBm Input Power at 2010.0...2025.0MHz 1) PIN machine model, 1 pulse continuous wave acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse. Please read cautions and warnings and important notes at the end of this document. 4 March 22, 2011 SAW Components B9816 2017.5/ 1900.0 MHz SAW 2in1 filter Data Sheet Transfer function Filter 1 (TD-SCDMA 2100) Transfer function Filter 1 (TD-SCDMA 2100) - Wideband Please read cautions and warnings and important notes at the end of this document. 5 March 22, 2011 SAW Components B9816 2017.5/ 1900.0 MHz SAW 2in1 filter Data Sheet Smith charts of Filter 1 S11 function S22 function Please read cautions and warnings and important notes at the end of this document. 6 March 22, 2011 SAW Components B9816 2017.5/ 1900.0 MHz SAW 2in1 filter Data Sheet Characteristics of Filter 2 (TD-SCDMA 1900) T = ZS = ZL = Temperature range for specification: Terminating source impedance: Terminating load impedance: fC Center frequency -30 ˚C to +85 ˚C 50Ω 50Ω min. typ. @ 25˚C max. — 1900.0 — MHz — 1.4 2.0 dB dB αmax Maximum insertion attenuation 1880.0 ... 1920.0 MHz Amplitude ripple (p-p) 1880.0 ... 1920.0 MHz — 0.4 0.8 1880.0 ... 1920.0 MHz — 1.5 2.0 1880.0 ... 1920.0 MHz — 1.5 2.0 Group delay ripple (p-p) 1880.0 ... 1920.0 MHz — 6 14.0 ns 28 35 28 28 15 15 28 25 42 42 31 33 31 27 32 30 — — — — — — — — dB dB dB dB dB dB dB dB ∆α Input VSWR Output VSWR α Attenuation 0.0 925.0 960.0 1805.0 1840.0 1980.0 2005.0 5000.0 ... ... ... ... ... ... ... ... 925.0 960.0 1805.0 1840.0 1850.0 2005.0 5000.0 6000.0 Please read cautions and warnings and important notes at the end of this document. MHz MHz MHz MHz MHz MHz MHz MHz 7 March 22, 2011 SAW Components B9816 2017.5/ 1900.0 MHz SAW 2in1 filter Data Sheet Maximum ratings of Filter 2 Operable temperature range T –40/+85 ˚C Storage temperature range Tstg –40/+85 ˚C DC voltage VDC 3 V ESD voltage VESD 501) V 5 dBm Input Power at 1880.0 ... 1920.0 MHz PIN machine model, 1 pulse continuous wave Tx bands 1) acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse. Please read cautions and warnings and important notes at the end of this document. 8 March 22, 2011 SAW Components B9816 2017.5/ 1900.0 MHz SAW 2in1 filter Data Sheet Transfer function Filter 2 (TD-SCDMA 1900) Transfer function Filter 2 (TD-SCDMA 1900) - Wideband Please read cautions and warnings and important notes at the end of this document. 9 March 22, 2011 SAW Components B9816 2017.5/ 1900.0 MHz SAW 2in1 filter Data Sheet Smith charts of Filter 2 S11 function S22 function Please read cautions and warnings and important notes at the end of this document. 10 March 22, 2011 SAW Components B9816 2017.5/ 1900.0 MHz SAW 2in1 filter Data Sheet References Type B9816 Ordering code B39202B9816P810 Marking and package C61157-A8-A18 Packaging F61074-V8227-Z000 Date codes L_1126 B9816_UB_NB.s2p, B9816_UB_WB.s2p S-parameters B9816_LB_NB.s2p, B9816_LB_WB.s2p see file header for port/pin assignment table Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See http://www.tdk.co.jp/tefe02/coil.htm#aname1 http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Surface Acoustic Wave Components Division P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2011. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 11 March 22, 2011 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 12 March 22, 2011