Microdc A1209XMS 1w, fixed input, isolated unregulated dual/single output,superminiature sip package Datasheet

A-XMS&B-XLMS Series
1W, FIXED INPUT, ISOLATED&UNREGULATED DUAL/SINGLE OUTPUT,SUPERMINIATURE SIP PACKAGE
SELECTION GUIDE
Input
FEATURES
Output
Switching
Frequency
(KHz,Typ)
Nominal
Range
A0505XMS
5
4.5-5.5
±5
±100
±10
70
84
A0509XMS
5
4.5-5.5
±9
±56
±6
75
81
Voltage(VDC)
Current
Efficiency
(%,Typ)
Voltage
(VDC)
Order code
Max
Min
A0512XMS
5
4.5-5.5
±12
±42
±5
78
82
◆
RoHS compliant
A0515XMS
5
4.5-5.5
±15
±33
±4
79
83
◆
Efficiency up to 80%
A1205XMS
12
10.8-13
±5
±100
±10
72
180
A1209XMS
12
10.8-13
±9
±56
±6
75
150
◆
Miniature SIP Package Style
A1212XMS
12
10.8-13
±12
±42
±5
77
84
Wide temperature performance at full 1
A1215XMS
12
10.8-13
±15
±33
±4
79
83
Watt load,-40°C to 85 °C
B0505XLMS
5
4.5-5.5
5
200
20
70
82
◆
UL 94V-0 package material
B0509XLMS
5
4.5-5.5
9
111
12
75
83
No heatsink required
B0512XLMS
5
4.5-5.5
12
83
9
79
83
◆
B0515XLMS
5
4.5-5.5
15
67
7
80
80
◆
Industry standard pinout
B1205XLMS
12
10.8-13
5
200
20
72
84
◆
Power sharing on output
B1209XLMS
12
10.8-13
9
111
12
75
81
1KVDC isolation
B1212XLMS
12
10.8-13
12
83
9
77
82
◆
B1215XLMS
12
10.8-13
67
7
79
83
Continuous Short Circuit Protection
15
◆
B2405XLMS
24
21.6-26
5
200
20
70
82
◆
Internal SMD construction
B2409XLMS
24
21.6-26
9
111
12
73
83
No external components required
B2412XLMS
24
21.6-26
12
83
9
75
83
B2415XLMS
24
21.6-26
15
67
7
78
80
B2424XLMS
24
21.6-26
24
42
5
77
84
◆
◆
MODEL SELECTION
①
②
③
④
⑤
B 05 05 X LMS
LMS
①Product Series
③Output Voltage
⑤Package Style
②Input Voltage
④Fixed Input
ISOLATION SPECIFICATIONS
Parameter
Isolation test voltage
Isolation resistance
APPLICATIONS
The A_XMS&B_XLMS Series are specially
designed for applications where a group of
polar power supplies are isolated from the input
power supply in a distributed power supply
system on a circuit board.
These products apply to:
1) Where the voltage of the input power supply
is fixed (voltage variation ≤ ±10%);
2) Where isolation is necessary between input
and output (isolation voltage ≤1000VDC);
3) Where the regulation of the output voltage
and the output ripple noise are not demanding.
Such as: purely digital circuits, ordinary low
frequency analog circuits, and IGBT power
device driving circuits.
Test at Viso=500VDC
Min.
Typ.
Max.
Units
1000
VDC
1000
MΩ
OUTPUT SPECIFICATIONS
Parameter
Test conditions
Output power
Line regulation
Load regulation
Min.
Typ.
0.1
For Vin change of 1%
Max
Unit
1
W
1.2
10% to 100% full load(5V output)
10
15
10% to 100% full load(9V output)
8.3
10
10% to 100% full load(12V output)
6.8
10
10% to 100% full load(15V output)
6.3
10
5
10
10% to 100% full load(24V output)
Output voltage
%
See tolerance envelope graph
Temperature drift
100% full load
Output Ripple&Noise*
20MHz Bandwidth(A-XMS)
50
75
MV
20MHz Bandwidth(B-XLMS)
75
100
p-p
100% load, nominal input(5V,12V)
100
100% load, nominal input(24V)
500
Switching frequency
MICRODC R ESERVES THE COPYRIGHT
Test conditions
Flash tested for 1 minute and 1mA max
0.03
%/°C
Khz
* Test ripple and noise by "parallel cable" method. See detailed operation instructions at Testing of Power
Converter section, application notes.
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 1 of 2
A-XMS&B-XLMS Series
Overload Protection
COMMON SPECIFICATIONS
Parameter
Conditions
Min.
Typ.
Storage humidity range
Max.
Units
95
%
Operating temperature
-40
85
Storage temperature
-55
125
Lead temperature
1.5mm from case for 10 seconds
℃
300
Temp.rise at full load
15
Free air convection
Case material
Plastic(UL94-V0)
Short circuit protection*
Continuous
1
3500
Weight
Recommended testing and application circuit
If you want to further decrease the input/output ripple, an “LC” filtering network
may be connected to the input and output ends of the DC/DC converter, see
(Figure 1).
25
Cooling
MTBF
Under normal operating conditions, the output circuit of these products has no
protection against overload. The simplest method is to connect a self-recovery
fuse in series at the input end or add a circuit breaker to the circuit.
s
K hours
2.1
g
*Supply voltage must be discontinued at the end of short circuit duration.
TYPICAL CHARACTERISTICS
It should also be noted that the inductance and the frequency of the “LC”
filtering network should be staggered with the DC/DC frequency to avoid
mutual interference. However, the capacitance of the output filter capacitor
must be proper. If the capacitance is too big, a startup problem might arise.
For every channel of output, provided the safe and reliable operation is
ensured, the greatest capacitance of its filter capacitor sees (Table 1).
Temperature Derating Graph
Vin
(VDC)
5
12
24
--
OUTLINE DIMENSIONS & PIN CONNECTIONS
EXTERNAL CAPACITOR TABLE (TABLE 1)
Cin
Single
Cout
Dual
Vout
Vout
(μF)
47
2.2
1.0
--
(VDC)
5
9
12
15
(μF)
10
4.7
2.2
1
(VDC)
±5
±9
±12
±15
Cout
(μF)
4.7
2.2
1.0
0.47
It's not recommend to connect any external capacitor in the application field
with less than 0.5 watt output.
SIZE Graph
RECOMMENDED FOOTPRINT
Top view,grid:2.54mm(0.1inch)
diameter:1.00mm(0.039inch)
Output Voltage Regulation and Over-voltage Protection Circuit
The simplest device for output voltage regulation, over-voltage and
over-current protection is a linear voltage regulator with overheat protection
that is conn ec ted to the in put or outp ut en d in ser i es (F i gu r e 2) .
FOOTPRINT DETAILS
Pin
1
Note:
Unit:mm(inch)
Pin section:0.50*0.3mm(0.020*0.012inch)
Pin section tolerances:±0.10mm(±0.004inch)
General tolerances: ±0.25mm(±0.010inch)
2
4
5
6
Single
VIN
GND
0V
NC
+Vo
Dual
VIN
GND
-Vo
0V
+Vo
When the environment temperature is higher than 71°C, the
product output power should be less than 60% of the
rated power.
No parallel connection or plug and play.
N C - Not available for electrical connection.
Requirement on output load
To ensure this module can operate efficiently and reliably, a minimum load is specified for this kind of DC/DC
converter in addition to a maximum load(namely full load).During operation, make sure the specified range
of input voltage is not exceeded,the minimum output load is not less than 10% of the full load, and that this
product should never be operated under no load!
RoHS COMPLIANT INFORMATION
Microdc Professional Power Module,Inc.
Tel:0086-20-86000646 E-mail:[email protected]
Website:http://www.microdc.cn
This series is compatible with RoHS soldering systems with a peak wave solder temperature of 300°C for 10 seconds.
The pin termination finish on the SIP package type is Tin Plate, Hot Dipped over Matte Tin with Nickel Preplate. The DIP
types are Matte Tin over Nickel Preplate. Both types in this series are backward compatible with Sn/Pb soldering
systems.
REACH COMPLIANT INFORMATION
This series has proven that this product does not contain harmful chemicals, it also has harmful chemical substances
through the registration, inspection and approval.
http://www.microdc.cn
Technical Enquiries-Email:[email protected] Tel:0086-20-86000646
Page 2 of 2
Similar pages