New Product MBR(F,B)7H35 thru MBR(F,B)7H60 Vishay General Semiconductor Schottky Barrier Rectifier High Barrier Technology for Improved High Temperature Performance FEATURES • Guardring for overvoltage protection ITO-220AC TO-220AC • Lower power losses, high efficiency • Low forward voltage drop • Low leakage current 2 2 1 1 MBR7Hxx MBRF7Hxx PIN 1 PIN 1 CASE PIN 2 PIN 2 TO-263AB K • High forward surge capability • High frequency operation • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) • Solder dip 260 °C, 40 s (for TO-220AC and ITO-220AC package) • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 2 1 MBRB7Hxx PIN 1 PIN 2 K HEATSINK PRIMARY CHARACTERISTICS IF(AV) 7.5 A VRRM 35 V to 60 V IFSM 150 A VF 0.55 V, 0.61 V IR 50 µA TJ max. 175 °C TYPICAL APPLICATIONS For use in low voltage, high frequency rectifier of switching mode power supplies, freewheeling diodes, dc-to-dc converters or polarity protection application. MECHANICAL DATA Case: TO-220AC, ITO-220AC, TO-263AB Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test, HE3 suffix for high reliability grade (AEC Q101 qualified), meets JESD 201 class 2 whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR7H35 MBR7H45 MBR7H50 MBR7H60 UNIT Maximum repetitive peak reverse voltage VRRM 35 45 50 60 V Working peak reverse voltage VRWM 35 45 50 60 V Maximum DC blocking voltage VDC 35 45 50 60 V Max. average forward rectified current (Fig. 1) IF(AV) 7.5 A Non-repetitive avalanche energy at 25 °C, IAS = 4 A, L = 10 mH EAS 80 mJ Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 150 A Peak repetitive reverse surge current at tp = 2.0 µs, 1 kHz IRRM 1.0 0.5 A Peak non-repetitive reverse energy (8/20 µs waveform) ERSM 20 10 mJ Electrostatic discharge capacitor voltage human body model: C = 100 pF, R = 1.5 kΩ Voltage rate of change (rated VR) Document Number: 88796 Revision: 19-May-08 VC 25 kV dV/dt 10 000 V/µs For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 New Product MBR(F,B)7H35 thru MBR(F,B)7H60 Vishay General Semiconductor MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL MBR7H35 MBR7H45 MBR7H50 MBR7H60 Operating junction and storage temperature range TJ, T STG - 65 to + 175 °C VAC 1500 V Isolation voltage (ITO-220AC only) from terminal to heatsink t = 1 min UNIT ELECTRICAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage (1) IF = 7.5 A IF = 7.5 A IF = 15 A IF = 15 A Maximum reverse current at rated VR (2) MBR7H35 MBR7H45 SYMBOL MBR7H50 MBR7H60 UNIT TYP. MAX. TYP. MAX. TC = 25 °C TC = 125 °C TC = 25 °C TC = 125 °C VF 0.50 0.61 0.63 0.55 0.75 0.66 0.58 0.68 0.73 0.61 0.87 0.72 V TC = 25 °C TC = 125 °C IR 3.0 50 10 2.0 50 10 µA mA Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TC = 25 °C unless otherwise noted) PARAMETER Thermal resistance, junction to case SYMBOL MBR MBRF MBRB UNIT RθJC 3.0 5.0 3.0 °C/W ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AC MBR7H45-E3/45 PREFERRED P/N 1.80 45 50/tube Tube ITO-220AC MBRF7H45-E3/45 1.94 45 50/tube Tube TO-263AB MBRB7H45-E3/45 1.33 45 50/tube Tube TO-263AB MBRB7H45-E3/81 1.33 81 800/reel Tape and reel TO-220AC MBR7H45HE3/45 (1) 1.80 45 50/tube Tube ITO-220AC MBRF7H45HE3/45 (1) 1.94 45 50/tube Tube TO-263AB MBRB7H45HE3/45 (1) 1.33 45 50/tube Tube TO-263AB MBRB7H45HE3/81 (1) 1.33 81 800/reel Tape and reel Note: (1) Automotive grade AEC Q101 qualified www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88796 Revision: 19-May-08 New Product MBR(F,B)7H35 thru MBR(F,B)7H60 Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 Instantaneous Reverse Leakage Current (mA) Average Forward Current (A) 10 MBR, MBRB 8 6 MBRF 4 2 0 25 50 75 100 125 150 TJ = 125 °C 0.1 0.01 MBR7H35 - MBR7H45 MBR7H50 - MBR7H60 0.001 TJ = 25 °C 0 175 20 40 60 80 100 Case Temperature (°C) Percent of Rated Peak Reverse Voltage (%) Figure 1. Forward Current Derating Curve Figure 4. Typical Reverse Characteristics Per Leg 1000 175 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p TJ = TJ max. 8.3 ms Single Half Sine-Wave 150 Junction Capacitance (pF) Peak Forward Surge Current (A) 1 0.0001 0 125 100 75 50 100 10 MBR7H35 - MBR7H45 MBR7H50 - MBR7H60 1 0.1 25 1 10 100 1 10 100 Number of Cycles at 60 Hz Reverse Voltage (V) Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Leg Figure 5. Typical Junction Capacitance Per Leg 10 10 TJ = 150 °C 1 TJ = 25 °C TJ = 125 °C 0.1 MBR7H35 - MBR7H45 MBR7H50 - MBR7H60 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 Transient Thermal Impedance (°C/W) 100 Instantaneous Forward Current (A) TJ = 150 °C 1 0.1 0.01 0.1 1 10 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Per Leg Figure 6. Typical Transient Thermal Impedance Per Leg Document Number: 88796 Revision: 19-May-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 New Product MBR(F,B)7H35 thru MBR(F,B)7H60 Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) ITO-220AC TO-220AC 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.370 (9.40) 0.360 (9.14) 0.154 (3.91) DIA. 0.148 (3.74) DIA. 0.113 (2.87) 0.103 (2.62) 0.145 (3.68) 0.135 (3.43) 1 PIN 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.022 (0.56) 0.014 (0.36) 0.205 (5.20) 0.195 (4.95) 7° REF. 0.191 (4.85) 0.171 (4.35) CASE 0.037 (0.94) 0.027 (0.68) 7° REF. 2 1 0.560 (14.22) 0.530 (13.46) PIN 1 0.135 (3.43) DIA. 0.122 (3.08) DIA. 0.350 (8.89) 0.330 (8.38) 0.110 (2.79) 0.100 (2.54) PIN 2 0.105 (2.67) 0.095 (2.41) 0.671 (17.04) 0.651 (16.54) PIN 1.148 (29.16) 1.118 (28.40) 2 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 0.350 (8.89) 0.330 (8.38) 7° REF. 0.076 (1.93) REF. 45° REF. 0.635 (16.13) 0.625 (15.87) 0.190 (4.83) 0.170 (4.32) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.185 (4.70) 0.175 (4.44) 0.055 (1.39) 0.045 (1.14) 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-263AB 0.411 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN. 0.055 (1.40) 0.045 (1.14) Mounting Pad Layout 0.42 (10.66) MIN. K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591 (15.00) 0 to 0.01 (0 to 0.254) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.055 (1.40) 0.047 (1.19) 0.205 (5.20) 0.195 (4.95) 0.140 (3.56) 0.110 (2.79) 0.33 (8.38) MIN. 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 (2.032) MIN. 0.105 (2.67) 0.095 (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 88796 Revision: 19-May-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1