MB810 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER CURRENT 8 Ampere VOLTAGE 100 Volt FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • For surface mounted applications in order to optimize board space • Low power loss, high efficiency • High surge capacity • Lead free in compliance with EU RoHS 2011/65/EU directive • Green molding compound as per IEC61249 Std. . (Halogen Free) MECHANICAL DATA • • • • • Case: JEDEC DO-214AB molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Standard packaging: 16mm tape (EIA-481) Weight: 0.0082 ounce, 0.2325 gram 1 Cathode 2 Anode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Resistive or inductive load. PARAMETER SYMBOL VALUE UNITS Maximum Recurrent Peak Reverse Voltage V RRM 100 V Maximum RMS Voltage V RMS 70 V Maximum DC Blocking Voltage V DC 100 V Maximum Average Forward Current IF(AV) 8 A Peak Forward Surge Current : 8.3ms single half sine-wave superimposed on rated load IFSM 150 A Maximum Forward Voltage at 8A VF 0.8 V Maximum DC Reverse Current at Rated DC Blocking Voltage IR 50 μA RΘJL RΘJA 15 110 T J ,T S TG -55 to +150 Typical Thermal Resistance Operating Junction and Storage Temperature Range (Note 1) (Note 2) O C/W O C NOTES : 1.Mounted on a FR4 PCB, single-sided copper, with 100cm 2 copper pad area 2.Mounted on a FR4 PCB, single-sided copper, mini pad. April 14,2016REV.03 PAGE . 1 MB810 CJ, Junction Capacitance (pF) IF, Forward Current (A) 9 8 7 6 5 4 3 2 1 0 0 25 50 75 100 125 150 TC, Case Temperature (°C) 10000 100 TJ = 125°C 10 TJ = 75°C 1 0.1 0.01 TJ = 25°C 20 30 40 10 1 0.1 1 10 100 VR, Reverse Bias Voltage (V) 100 TJ = 150°C 1000 100 Fig.2 Typical Junction Capacitance IF, Forward Current (A) IR, Reverse Current (μA) Fig.1 Forward Current Derating Curve 1000 50 60 70 80 10 TJ = 150°C 1 Percent of Rated Peak Reverse Voltage (%) Fig.3 Typical Reverse Characteristics TJ = 75°C 0.1 TJ = 25°C 0.01 90 100 TJ = 125°C 0 0.2 0.4 0.6 0.8 1 VF, Forward Voltage (V) Fig.4 Typical Forward Characteristics Reverse Voltage (V) 120 100 80 60 40 20 0 0 25 50 75 100 125 150 TJ, Junction Temperature (°C) Fig.5 Operating Temperature Derating Curve April 14,2016REV.03 PAGE . 2 MB810 MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 3K per 13" plastic Reel T/R - 0.5K per 7" plastic Reel April 14,2016REV.03 PAGE . 3 MB810 Part No_packing code_Version MB810_R1_00001 MB810_R2_00001 For example : RB500V-40_R2_00001 Serial number Version code means HF Packing size code means 13" Part No. Packing type means T/R Packing Code XX Packing type Tape and Ammunition Box (T/B) Tape and Reel (T/R) Bulk Packing (B/P) Tube Packing (T/P) Tape and Reel (Right Oriented) (TRR) Tape and Reel (Left Oriented) (TRL) FORMING April 14,2016REV.03 Version Code XXXXX 1st Code Packing size code A N/A 0 HF 0 serial number R 7" 1 RoHS 1 serial number B 13" 2 T 26mm X S 52mm Y L F PANASERT T/B CATHODE UP (PBCU) PANASERT T/B CATHODE DOWN (PBCD) 2nd Code HF or RoHS 1st Code 2nd~5th Code U D PAGE . 4 MB810 Disclaimer • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc.. • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document. • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred. • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale. • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining. April 14,2016REV.03 PAGE . 5