COMPONENTS PRODUCT INFORMATION NEW Compact Waterproof Automotive Connectors MX47 Series CONNECTOR MB-0216-1 September 2010 RoHS Compliant JAE has developed the MX47 Series compact, high-density waterproof connector for automotive applications. The MX47 Series utilizes a structure similar to the existing MX23A Series waterproof connector, but is more compact while maintaining a low height. The applicable cable and performance is equivalent or higher than the MX23A, there is a guide key for secure mating, and pin terminals have Pb-free compliant complete plating. Superior vibration resistance makes the connector ideally suited for use in harsh environments such as the engine areas of both 2 and 4-wheeled vehicles. Features •2.5mm horizontal pitch, 3.6mm vertical pitch, 3 row board to wire connector. •39 position, different keying available. •Guide key for secure mating. •Dowels on both side of connector for light press-fit to board for temporary holding. •Socket terminal is a compact box type which is strong against external force. •Retainer is a simple structure front cap type which is easy to attach. •Pin terminal press-fit structure to prevent leakage of potting material. •Slim type pin terminal with 0.5mm thickness and 1.0mm width. General Specifications •No. of Contacts: 39 pos. (Different keying available) •Contact Resistance: 5m ohm max. (initial) 10m ohm max. (after test) •Rated Current: 3A •Connector Insertion Force: 100 N max. •Waterproof: 98 kPa min. (initial) •Vibration Resistance: 20G (50 to 1000Hz) each pole / 9 hours •Applicable Cable: AVSS 0.3 to 1.25sq •Operating Temperature: -40 Deg. C to +125 Deg. C JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 1/5 MB-0216-1 Structure, Materials and Finishes ■ Pin Connector Component Pin Housing Pin Terminal 1, 2, 3 Material / Finish 30% GF PBT Brass / Tin plating Pin Terminal 1 Pin Terminal 2 Pin Terminal 3 Pin Housing Component Socket Housing Seal Ring Grommet Rear Cover Front Cap Socket Terminal ■Socket Connector Front Cap Socket Terminal Material / Finish 30% GF PBT Silicone Rubber Silicone Rubber 30% GF PBT 30% GF PBT Brass / Tin plating Rear Cover Grommet Socket Housing Seal Ring Front Cap Socket Terminal JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 2/5 MB-0216-1 Product Drawing ■Socket Housing (Available with different keying) Part Number: MX47039SF1 SJ Drawing: SJ109556 (Pitch) ■ Front Cap (Same for different keying product) Part Number: MX47039XF1 SJ Drawing: SJ109558 (Pitch) Company Emblem, Cavity Mark JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 3/5 MB-0216-1 ■ Pin Connector (Available with different keying) Part Number: MX47039NF1 SJ Drawing: SJ109562 Lot Number (Pitch) B105121 Applicable 適合基板寸法(参考) Dimensions of Board (For reference) Company Emblem, Cavity Mark Material ■ Socket Terminal (Two other sizes available according to wire size.) Part Number: M47S65H2FA SJ Drawing: SJ109559 JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 4/5 MB-0216-1 Product Line-up Pin Connector Socket Connector Front Cap Socket Terminal Dummy Plug Part Number MX47039NF1 MX47039NF2 MX47039SF1 MX47039SF2 SJ Drawing SJ109562 SJ109563 SJ109556 SJ109557 MX47039XF1 SJ109558 M47S65H4FA M47S65H3FA M47S65H2FA M120-55780 SJ109561 SJ109560 SJ109559 SJ036379 Remarks Standard Product Different Keying Product Standard Product Different Keying Product Can be used for both standard and different keying products Refer to below for applicable wire and Tooling. Same as MX23A Connector Crimp Tools Socket Terminal Applicable Wire Hand Crimp Tool M47S65H4FA 0.3~0.5mm , φ1.4~1.6 AVSS 0.3, 0.5 equivalent M47S65H3FA 0.75~0.85mm , φ1.8 AVSS0.85 equivalent M47S65H2FA 1.25mm , φ2.1 AVSS1.25 equivalent 2 CT160-3-MX47 2 CT160-3B-MX47 2 Handling Instructions 3502-MX47-2 CT160-3C-MX47 Terminal Removal Tool Specifications Semi-Automatic Applicator ET-MX47 JACS-10621 JAHL-10621 Notice: Products shown in this leaflet are Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2010, Japan Aviation Electronics Industry, Ltd. 5/5