SMC DF1510S Low forward voltage drop Datasheet

DF150S-DF1510S
Green Products
Technical Data
Data Sheet N0468, Rev. -
DF150S-DF1510S
Single-Phase 1.5A Surface Mount Glass Passivated Bridge Rectifiers
Features:
•
•
•
•
•
•
Glass passivated die construction
Low forward voltage drop
High current capability
High surge current capability
Designed for surface mount application
Plastic material-UL flammability 94V-0
Mechanical Data:
•
•
•
•
•
Case: DF-S, Molded plastic
Terminals: Plated leads solderable per MIL-STD-202, Method 208
Polarity: as marked on case
Mounting Position: Any
Lead Free: For RoHS / Lead Free Version
Mechanical Dimensions: In Inches/mm
DF-S
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
DF150S-DF1510S
Green Products
Technical Data
Data Sheet N0468, Rev. -
Marking Diagram:
Where XXXXX is YYWWL
DF150S
YY
WW
L
= Part Name
= Year
= Week
= Lot Number
Cautions:Molding resin
Epoxy resin UL:94V-0
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Characteristic
Symbol
DF
DF
DF
150S 151S 152S
DF
DF
DF
DF
154S 156S 158S 1510S
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VDC
50
100
200
400
600
800
1000
RMS Reverse Voltage
VRMS
35
70
140
280
420
560
700
Average forward rectified output current
(Note 1)
@TA = 40°C
Unit
V
V
IO
1.5
A
Non-Repetitive Peak Forward Surge Current
8.3ms Single half sine-wave superimposed on
rated load (JEDEC Method)
IFSM
55
A
Forward Voltage (per element)
VF
1.1
V
Peak Reverse Current
@TA = 25°C
At Rated DC Blocking Voltage @TA = 125°C
IRM
5.0
500
µA
Typical Junction Capacitance(per leg) (Note 2)
CJ
25
pF
RθJA
RθJL
40
15
°C/W
TJ, TSTG
-55 to +150
°C
@IF =1.5A
Typical Thermal Resistance (per leg)
Operating and Storage Temperature Range
Case Style
DF-S
2
Note: 1. Mounted on glass epoxy PC board with 1.3mm solder pad.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
DF150S-DF1510S
Technical Data
Data Sheet N0468, Rev. -
Green Products
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
DF150S-DF1510S
Technical Data
Data Sheet N0468, Rev. -
Green Products
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales
department for the latest version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or
any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd
assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information,
products or circuits described in the datasheets.
4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any
secondary damage resulting from use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics
(Nanjing) Co., Ltd.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC
- Sangdest Microelectronics (Nanjing) Co., Ltd.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations..
• China - Germany - Korea - Singapore - United States •
• http://www.smc-diodes.com - sales@ smc-diodes.com •
Similar pages