AK1-076C - AK15-06C TRANSIENT VOLTAGE SUPPRESSION DIODES Features ! Axial Lead Terminals ! High Current TransientSuppressor Excellent ClampingCapability Glass PassivatedJunction Bi-directional Low Slope Resistance ! ! ! ! ! ! AK & Repetition Rate(dutycycle):0.01% o High Temperature Soldering:260 C/10 Seconds at Terminals Mechanical Data ! Case: AK DIM A B C D E F DIMENSIONS INCHES MIN ----.047 .197 .922 --- MAX .630 .500 .052 --.979 .098 MM MIN ----1.20 5.00 23.43 --- MAX 16.00 12.70 1.32 --24.87 2.50 NOTE Maximum Ratings TA = 25C unless otherwise specified Characteristic Symbol Current Rating,Rated IPP Measured With 8/20us Pulse Ipp Operating Junction and Storage Temperature Range Notes: Unit Value AK1 1 AK3 3 AK6 6 AK10 10 AK15 15 KAmps TJ TSTG o C -55 to+150 1. High Temperature Solder Exemption Applied, see EU Directive Annex Notes 7 1 of 2 www.sunmate.tw Electrical Characteristics(TA =25oC unless otherwise noted) Part Number Reverse StandOff Voltag VAC(V) AK1-076C AK3-058C AK3-066C AK3-076C AK3-380C AK3-430C AK6-058C AK6-066C AK6-076C AK6-170C AK6-190C AK6-240C AK6-380C AK6-430C AK10-058C AK10-066C AK10-076C AK10-170C AK10-190C AK10-200C AK10-240C AK10-380C AK10-430C AK15-058C AK15-076C 54 40 45 54 275 310 40 45 54 130 145 180 275 310 40 45 54 130 145 150 180 275 310 40 54 VDC(V) 76 58 66 76 380 430 58 66 76 170 190 240 380 430 58 66 76 170 190 200 240 380 430 58 76 Breakdown Voltage VBR(V) MIN.@IT Test Current ^ƵƌŐĞ Current Rating Maximum Clamping Voltage IT(mA) 8/20us (KA) VC(V) @IPP 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1 3 3 3 3 3 6 6 6 6 6 6 6 6 10 10 10 10 10 10 10 10 10 15 15 135 110 125 140 520 625 110 125 135 260 290 340 520 625 110 125 135 260 290 330 340 520 625 110 145 83 64 70 85 401 440 64 70 83 180 200 250 401 440 64 70 83 180 200 222 250 401 440 64 85 2 of 2 Reverse Leakage IR(uA) @VDC 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 www.sunmate.tw