Taoglas ILA08 868mhz embedded ceramic loop antenna Datasheet

SPECIFICATION
Part No.
:
ILA.08
Description
:
868MHz Embedded Ceramic Loop Antenna
for ISM/Lora/LPWAN/Sigfox
Features
:
5.0mm *3.0mm * 0.5mm
High Efficiency
Omni-Directional
Low profile
Tiny Size
Surface-Mount
RoHS compliant
DSP-15-8- SPE-16-08-050/A/WY
Page 1 of 19
1. Introduction
The ILA.08 is a new 868 MHz ISM band embedded ceramic loop antenna from
Taoglas featuring a good efficiency of 45% at the center of the band. It is the
perfect solution for the growing amount of devices using the 868Mhz band, such as
Sigfox or LoRa applications in Europe, or in metering applications.
This antenna works the best when placed at the center of the board edge. The
ILA.08 antenna, at 5 x 3 x 0.5 mm, is low profile and would be suitable for devices
with space constraints. The ILA.08 is delivered on tape and reel and now allows
M2M customers to use an omni-directional SMT antenna. The omni-directional
radiation characteristics allow for excellent performance regardless of device
orientation. This is especially useful for devices that are not fixed in one particular
spot during use. When there is little PCB space available for antenna placement, but
high performance is required, the ILA.08 is the ideal choice.
The antenna is manufactured in a TS16949 first tier automotive approved facility
and has passed the most stringent reliability testing. Since it is SMD, it is much
easier to integrate and more reliable in high volume production compared to helical
antennas which are cumbersome to install and subject to variability due to need for
manual assembly.
Typical Applications:
-
Sigfox
-
Lora
-
LPWAN
-
Automated Meter Reading (AMR)
-
RFID
-
Remote Monitoring
-
Healthcare
-
Sensing
-
Alarm Systems
-
Handheld Devices
DSP-15-8- SPE-16-08-050/A/WY
Page 2 of 19
2. Specification
Electrical Characteristics*
Frequency (MHz)
863
868
870
Peak Gain (dBi)
-0.91
-0.51
-0.72
Efficiency (%)
42.57
46.47
44.57
Return Loss (dB)
<-10
<-10
<-10
Impedance (Ω)
50
Polarization
Linear
Input Power
10W
MECHANICAL
Dimensions (mm)
5.0 x 3.0 x 0.5
Ground plane (mm)
80 x 40 (Standard Evaluation Board)
Weight (g)
0.02
ENVIRONMENTAL
Operating Temperature
-40°C to 85°C
Storage Temperature
-25°C to 85°C
Relative Humidity
20% to 70%
*Tested on 80mm*40mm evaluation board.
DSP-15-8- SPE-16-08-050/A/WY
Page 3 of 19
3. Antenna Characteristics
3.1 Return Loss
3.2 Efficiency
DSP-15-8- SPE-16-08-050/A/WY
Page 4 of 19
3.3 Average Gain
3.4 Peak Gain
DSP-15-8- SPE-16-08-050/A/WY
Page 5 of 19
4. Antenna Radiation Pattern
Y
X
Z
4.1
2D Radiation Pattern
XY-Plane
X
Y
DSP-15-8- SPE-16-08-050/A/WY
Page 6 of 19
XZ-Plane
Z
X
YZ-Plane
Z
Y
DSP-15-8- SPE-16-08-050/A/WY
Page 7 of 19
4.2 3D Radiation Pattern
l
ISM 868MHz
DSP-15-8- SPE-16-08-050/A/WY
Page 8 of 19
5. Mechanical Drawing
(Unit: mm)
5.1 ILA.08
DSP-15-8- SPE-16-08-050/A/WY
Page 9 of 19
5.2 ILAD.08
DSP-15-8- SPE-16-08-050/A/WY
Page 10 of 19
6. Layout Guide
6.1 Footprint
DSP-15-8- SPE-16-08-050/A/WY
Page 11 of 19
DSP-15-8- SPE-16-08-050/A/WY
Page 12 of 19
DSP-15-8- SPE-16-08-050/A/WY
Page 13 of 19
* Footprint drawings in .dwg format will be provided upon request.
DSP-15-8- SPE-16-08-050/A/WY
Page 14 of 19
6.2 Matching Circuit
Like all antennas, surrounding components, enclosures, and changes to the GND
plane dimensions can alter performance. A pi-matching network like the one shown
below is required in case adjustments need to be made. The antenna EVB has the
same matching network. The components on the EVB are a good starting point for a
new design, but will need to be adjusted upon integration for best performance. The
zero ohm resistor is needed for the ability to solder down a coax pigtail to make
measurements with a vector network analyzer.
DSP-15-8- SPE-16-08-050/A/WY
Page 15 of 19
7. Solder Reflow Profile
Typical Soldering Profile for Lead-free Process:
DSP-15-8- SPE-16-08-050/A/WY
Page 16 of 19
8. Packaging
DSP-15-8- SPE-16-08-050/A/WY
Page 17 of 19
Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves
the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all
rights to this document and the information contained herein. Reproduction, use or disclosure to third parties
without express permission is strictly prohibited.
Copyright © Taoglas Ltd
DSP-15-8- SPE-16-08-050/A/WY
Page 18 of 19
DSP-15-8- SPE-16-08-050/A/WY
Page 19 of 19
Similar pages