HVGC-100 100W Single Output LED Power Supply series Features : Constant current design Wide input range 180~480VAC Built-in active PFC function High efficiency up to 91% Protections: Short circuit / Over voltage / Over temperature Cooling by free air convection OCP point adjustable through output cable or internal potentiometer IP67 / IP65 design for indoor or outdoor installations Class 2 power unit Three in one dimming function (0~10Vdc or 10V PWM signal or resistance) Suitable for LED lighting and street lighting applications Compliance to worldwide safety regulations for lighting Suitable for dry / damp / wet locations 5 years warranty (Note.6) 110 F HVGC-100-350 A M M IP65 IP67 A : IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. B : IP67 rated. Constant current level adjustable through output cable with 0~10Vdc or 10V PWM signal or resistance. D (option) : IP67 rated. Timer dimming function, contact MEAN WELL for details. SPECIFICATION MODEL RATED CURRENT 3 ~ 285V 3 ~ 142V RATED POWER 99.75W 99.4W RIPPLE & NOISE (max.) Note.2 1Vp-p 0.5Vp-p Can be adjusted by internal potentiometer or through output cable 210 ~ 350mA 420 ~ 700mA SETUP, RISE TIME 3000ms, 150ms at full load HOLD UP TIME (Typ.) 30ms at full load VOLTAGE RANGE PROTECTION 700mA MAX. OUTPUT VOLTAGE CURRENT ADJ. RANGE INPUT HVGC-100-700 350mA 5.0% CURRENT ACCURACY OUTPUT HVGC-100-350 440VAC / 347VAC ; B type 5000ms, 150ms at 95% load 440VAC / 347VAC 440VAC / 347VAC Note.3 180 ~ 480VAC 254VDC ~ 679VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF 0.98/230VAC, PF 0.98/277VAC, PF 0.97/347VAC, PF 0.94/440VAC at full load (Please refer to "Power Factor Characteristic" curve) EFFICIENCY (Typ.) 91% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 0.32A / 347VAC 0.26A / 440VAC COLD START 50A / 440VAC 91% LEAKAGE CURRENT <0.75mA / 440VAC SHORT CIRCUIT Constant current limiting, recovers automatically after fault condition is removed OVER VOLTAGE 300 ~ 320V 150 ~ 160V Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery OVER TEMPERATURE 100 10 (RTH2) Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. -40 ~ +70 WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT (Refer to "Derating Curve") 20 ~ 95% RH non-condensing -40 ~ +80 0.03%/ , 10 ~ 95% RH (0 ~ 50 ) VIBRATION 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes SAFETY STANDARDS Note.4 UL8750, CSA C22.2 No. 250.0-08, TUV EN61347-1, EN61347-2-13, IP65 or IP67 approved ; design refer to UL60950-1, TUV EN60950-1 SAFETY & EMC OTHERS WITHSTAND VOLTAGE I/P-O/P:3.75KVAC ISOLATION RESISTANCE EMC EMISSION I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55015, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3, FCC part 15 class B EMC IMMUNITY MTBF Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, light industry level (surge 4KV), criteria A 186.1Khrs min. MIL-HDBK-217F (25 ) DIMENSION 236*68*38.8mm (L*W*H) 1.18Kg; 12pcs/15.2Kg/0.74CUFT PACKING NOTE I/P-FG:1.88KVAC O/P-FG:0.5KVAC 1. All parameters NOT specially mentioned are measured at 347VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 2.2uf parallel capacitor. 3. Derating may be needed under low input voltages. Please check the static characteristics for more details. 4. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Refer to warranty statement. File Name:HVGC-100-SPEC 2012-03-20 HVGC-100 100W Single Output LED Power Supply Mechanical Specification Case No.994 series Unit:mm A Type:(HVGC-100-_A) 236 212 12 9.4 9.6 Io ADJ. 300 20 34.2 T case 68 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 104.4 300 20 +V(Red) -V(Black) 9.4 34 STW 18AWG 3C SJTW 18AWG 2C 4.2 4PL 38.8 T case: Max. Case Temperature. IP65 rated. Output voltage and constant current level can be adjusted through internal potentiometer. (Can access by removing the rubber stopper on the case.) B Type:(HVGC-100-_B) 236 212 12 9.6 9.4 300 20 34.2 68 T case 104.4 SJTW 18AWG 2C 34 STW 18AWG 3C 9.4 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) UL2517 18AWG 2C 300 20 DIM+(Blue) DIM-(White) +V(Red) -V(Black) 4.2 4PL 38.8 T case: Max. Case Temperature. D Type(option):(HVGC-100-_D) 236 212 12 9.4 9.6 T case 68 34.2 300 20 104.4 300 20 +V(Red) -V(Black) 34 STW 18AWG 3C 9.4 SJTW 18AWG 2C 4.2 4PL T case: Max. Case Temperature. 38.8 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) IP67 rated. Timer dimming function, contact MEAN WELL for details. File Name:HVGC-100-SPEC 2012-03-20 HVGC-100 100W Single Output LED Power Supply series Block Diagram Fosc : 80KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING PFC CIRCUIT +V -V DIM+ DIM(B Type) O.L.P. FG O.L.P. DETECTION CIRCUIT PWM & PFC CONTROL PFC CONTROL O.V.P. O.T.P. Derating Curve Static Characteristics 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -40 -25 -10 0 15 30 50 60 70 60 50 40 (HORIZONTAL) 180 AMBIENT TEMPERATURE ( ) 347 440 480 INPUT VOLTAGE (V) 60Hz Power Factor Characteristic PF Constant Current Mode 1.00 0.98 0.96 0.94 0.92 0.90 0.88 0.86 0.84 0.82 0.80 440V 347V 277V 230V 50% 60% 70% 80% 90% 100% (100W) LOAD File Name:HVGC-100-SPEC 2012-03-20 HVGC-100 100W Single Output LED Power Supply series EFFICIENCY vs LOAD (HVGC-100-700 Model) HVGC-100 series possess superior working efficiency that up to 91% can be reached in field applications. 0.94 0.90 EFFICIENCY (%) 0.86 0.82 0.78 440V 0.74 347V 0.70 277V 0.66 230V 0.62 0.58 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% LOAD DRIVING METHODS OF LED MODULE There are two major kinds of LED drive method "direct drive" and "with LED driver". A typical LED power supply may either work in "constant voltage mode (CV) or constant current mode (CC)" to drive the LEDs. Mean Well's LED power supply with CV+ CC characteristic can be operated at both CV mode (with LED driver, at area (A) and CC mode (direct drive, at area (B). Vo(%) 100 (A) Constant Voltage area (B) Constant Current area 50 (max.) 50 100 Io (%) Typical LED power supply I-V curve File Name:HVGC-100-SPEC 2012-03-20 HVGC-100 100W Single Output LED Power Supply series DIMMING OPERATION FG (Green/Yellow) AC/L(Brown) AC/N(Blue) DIM+(Blue) DIM-(White) HVGC-100 +V(Red) -V(Black) Built-in 3 in 1 dimming function, IP67 rated. Output constant current level can be adjusted through output cable by connecting a resistance or 0 ~ 10Vdc or 10V PWM signal between DIM+ and DIM-. Please DO NOT connect "DIM-" to "-V". Reference resistance value for output current adjustment (Typical) 10K 30K 40K 50K 70K 80K 90K Single driver 100K 60K 20K Resistance Multiple drivers value (N=driver quantity for synchronized 10K /N 20K /N 30K /N 40K /N 50K /N 60K /N 70K /N 80K /N 90K /N 100K /N dimming operation) Percentage of rated current 20% 10% 30% 40% 50% 60% 70% 80% 90% 100% OPEN ----102%~108% 0 ~ 10V dimming function for output current adjustment (Typical) Dimming value 0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN Percentage of rated current 0% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% 10V PWM signal for output current adjustment (Typical): Frequency range :100Hz ~ 3KHz Duty value 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% OPEN Percentage of rated current 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 102%~108% WATERPROOF CONNECTION Waterproof connector Waterproof connector can be assembled on the output cable of HVGC-100 to operate in dry/wet/damp or outdoor environment. AC source Size M12 Order No. Suitable Current HVGC-100 I/P O/P Pin Configuration (Female) 4-PIN 5A/PIN M12-04 10A max. 5-PIN 5A/PIN M12-05 10A max. Size M15 Order No. Suitable Current Pin Configuration (Female) 2-PIN 12A/PIN M15-02 12A max. LED Lamp File Name:HVGC-100-SPEC 2012-03-20 100W Single Output LED Power Supply HVGC-100 series Cable Joiner CJ04-1 suitable for 14AWG~16AWG CJ04-2 suitable for 18AWG~22AWG 20 25 66 26 Up to four wires can be connected through this cable joiner by soldering or clamping by tools. LED Lamp HVGC-100 O/P Wires CJ04 cable joiner can be purchased independently for user's own assembly. MEAN WELL order No. : CJ04-1, CJ04-2. Junction Box(Option ) 208.8 10 76 370.8 8.5 STW 18AWG 3C +V(Red) -V(Black) 32 68 FG (Green/Yellow) AC/L(Brown) AC/N(Blue) 61 8.5 6 5 SJTW 18AWG 2C 2- 5 3- PF 1/2" 3- PF 1/2" 150 20 35 38.8 150 20 Optional junction box available for A / Blank - type , please contact MEAW WELL for details. 86 File Name:HVGC-100-SPEC 2012-03-20