3015 POWER INDUCTORS High-Reliability Power Inductors MS412PJB ■ High temperature materials allow operation in ambient temperatures up to 155°C ■ Special construction allows it to pass vibration testing to 80 G and shock testing to 1000 G. ■ Tin-lead (Sn-Pb) termination for the best possible board adhesion Core material Ferrite Terminations Tin-lead (63/37) over tin over nickel. Weight 40 – 45 mg Ambient temperature –55°C to +105°C with Irms current, +105°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 1000/7″ reel Plastic tape: 12 mm wide, 0.26 mm thick, 8 mm pocket spacing, 1.65 mm pocket depth Recommended pick and place nozzle OD: 3 mm; ID: ≤1.5 mm Inductance2 Part number1 ±20% (µH) MS412PJB102MSZ 1.0 MS412PJB152MSZ 1.5 MS412PJB182MSZ 1.8 MS412PJB222MSZ 2.2 MS412PJB332MSZ 3.3 MS412PJB472MSZ 4.7 MS412PJB682MSZ 6.8 MS412PJB103MSZ 10 MS412PJB153MSZ 15 MS412PJB183MSZ 18 MS412PJB223MSZ 22 MS412PJB333MSZ 33 MS412PJB473MSZ 47 MS412PJB683MSZ 68 MS412PJB104MSZ 100 MS412PJB124MSZ 120 MS412PJB154MSZ 150 MS412PJB184MSZ 180 MS412PJB224MSZ 220 MS412PJB334MSZ 330 DCR max3 (Ohms) 0.075 0.100 0.100 0.110 0.130 0.200 0.300 0.440 0.700 0.750 0.825 1.30 1.55 2.25 3.40 4.60 6.10 8.60 9.50 23.0 SRF (MHz)4 Isat (A)5 min typ 10% drop 20% drop 30% drop 133 190 1.8 2.0 2.1 98.0 140 1.8 2.1 2.2 94.5 135 1.5 1.7 2.1 77.0 110 2.0 2.0 2.1 63.0 90 1.4 1.5 1.5 55.3 79 1.1 1.2 1.2 40.6 58 0.83 0.86 0.89 33.6 48 0.60 0.69 0.73 24.5 35 0.58 0.61 0.62 23.1 33 0.56 0.58 0.59 21.0 30 0.48 0.49 0.50 16.1 23 0.39 0.41 0.42 11.9 17 0.36 0.38 0.39 9.80 14 0.30 0.31 0.32 7.70 11 0.24 0.25 0.26 6.30 9.0 0.21 0.22 0.23 5.60 8.0 0.19 0.20 0.20 5.25 7.5 0.16 0.17 0.17 4.20 6.0 0.15 0.16 0.16 3.50 5.0 0.10 0.11 0.11 1. When ordering, please specify testing code: MS412PJB333MSZ Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10004 2. Inductance tested at 100 kHz, 0.1 Vrms using an Agilent/HP 4192A. Inductance at 1 MHz is the same for parts with SRF ≥10 MHz. ® © Coilcraft, Inc. 2011 3. DCR measured on a micro-ohmmeter. 4. SRF measured using Agilent/HP 8753ES or equivalent. 5. DC current that causes the specified inductance drop from its value without current. 6. Current that causes the specified temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 Irms (A)6 20°C rise 40°C rise 1.1 1.6 1.0 1.4 0.88 1.1 0.88 1.1 0.80 1.1 0.72 1.0 0.54 0.72 0.44 0.60 0.35 0.47 0.34 0.46 0.34 0.46 0.28 0.38 0.24 0.32 0.20 0.26 0.15 0.21 0.14 0.18 0.12 0.16 0.10 0.14 0.090 0.12 0.060 0.080 Document MS436-1 Phone 800-981-0363 Fax 847-639-1508 Revised 03/25/11 E-mail [email protected] Web www.coilcraft-cps.com 3015 POWER INDUCTORS MS412PJB Series (3015) Typical L vs Frequency Typical L vs Current 100 100 10 Inductance (µH) Inductance (µH) 33 µH 22 µH 10 µH 4.7 µH 3.3 µH 2.2 µH 1 0.1 1.0 µH 33 µH 22 µH 10 10 µH 4.7 µH 3.3 µH 2.2 µH 1 1.0 µH 0.1 0.01 1 0.1 10 Frequency (MHz) 0.01 0.1 Current (A) 1 10 Current Derating 0.116 ±0.003* 2,95 ±0,076 120 100 90 0.116 ±0.003* 2,95 ±0,076 80 70 60 Suggested Land Pattern 0.0591 ±0.004 † 1,50 ±0,10 50 40 0.020 0,51 25°C Percent of rated Current 110 30 20 Isat Irms 10 0 -40 -20 0 20 40 60 80 100 120 0.045 1,14 0.025 0,64 140 160 0.130 3,30 Ambient temperature (°C) 0.035 0,89 0.040 1,02 are of the case not * Dimensions including the termination. For maximum overall dimensions including the termination, add 0.005 in / 0,13 mm. 0.130 3,30 † Height dimension is after mounting. For maximum height dimension before mounting, add 0.006 in / 0,152 mm. Dimensions are in ® Specifications subject to change without notice. Please check our website for latest information. 1102 Silver Lake Road Cary IL 60013 © Coilcraft, Inc. 2011 inches mm Document MS436-2 Phone 800-981-0363 Fax 847-639-1508 Revised 03/25/11 E-mail [email protected] Web www.coilcraft-cps.com