Document 177-1 SMT Power Inductors – DO1608C • High energy storage and very low resistance • Defense Supply Center CID A-A-59742 Designer’s Kit C377 contains 3 of each stocked part Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant gold over nickel over moly-manganese. Other terminations available at additional cost. Weight 128 – 164 mg Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 750/7″reel; 2500/13″ reel Plastic tape: 12 mm wide, 0.28 mm thick, 4 mm pocket spacing, 3 mm pocket depth PCB washing Only pure water or alcohol recommended 5 DCR SRF Irms (A) 2 4 Part L % max typ Isat 20°C 40°C number1 (µH) tol3 (Ohms) (MHz) (A) rise rise DO1608C-102ML_ 1.0 DO1608C-152ML_ 1.5 DO1608C-222ML_ 2.2 DO1608C-272ML_ 2.7 DO1608C-332ML_ 3.3 DO1608C-472ML_ 4.7 DO1608C-682ML_ 6.8 DO1608C-822ML_ 8.2 DO1608C-103ML_ 10 DO1608C-153ML_ 15 DO1608C-223_L_ 22 DO1608C-333_L_ 33 DO1608C-473_L_ 47 DO1608C-683_L_ 68 DO1608C-104_L_ 100 DO1608C-154_L_ 150 DO1608C-224_L_ 220 DO1608C-334_L_ 330 DO1608C-474_L_ 470 DO1608C-684_L_ 680 DO1608C-105_L_ 1000 20 20 20 20 20 20 20 20 20 20 20,10 20,10 20,10 20,10 20,10 20,10 20,10 20,10 20,10 20,10 20,10 0.05 0.06 0.07 0.08 0.08 0.09 0.13 0.16 0.16 0.23 0.37 0.51 0.64 0.86 1.27 2.00 3.11 3.80 5.06 9.20 13.8 130 115 100 75 70 50 45 40 35 30 20 15 14 11 9.0 6.0 5.5 5.0 4.0 3.0 2.0 2.9 2.6 2.3 2.1 2.0 1.5 1.2 1.15 1.10 0.90 0.70 0.58 0.50 0.40 0.31 0.27 0.22 0.18 0.16 0.14 0.10 1.90 1.90 1.85 1.80 1.60 1.40 1.20 1.10 1.10 0.90 0.75 0.60 0.52 0.44 0.37 0.28 0.23 0.22 0.20 0.14 0.11 2.70 2.65 2.55 2.45 2.20 1.90 1.60 1.55 1.50 1.25 0.95 0.80 0.70 0.60 0.50 0.39 0.31 0.30 0.26 0.19 0.15 1. Please specify tolerance, termination and packaging codes: DO1608C-105MLC K = 10%, M = 20% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant gold over nickel over moly-manganese. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (750 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2500 parts per full reel). 2. Tested at 100 kHz, 0.1 Vrms, 0 Adc using an Agilent/HP 4263B LCR meter or equivalent. 3. Tolerances in bold are stocked for immediate shipment 4. DC current at which the inductance drops 10% (typ) from its value without current. 5. Current that causes the specified temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Tolerance: US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 177-1 Revised 08/16/12 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information. Document 177-2 SMT Power Inductors – DO1608C Series Typical L vs Frequency Typical L vs Current 10000 10000 1000 µH 100 µH 100 10 µH 10 1 µH 1 0.1 0.01 1000 µH 1000 Inductance (µH) Inductance (µH) 1000 100 µH 100 10 µH 10 1 µH 1 1 0.1 10 0.1 0.01 1 0.1 Frequency (MHz) 0.260 max 6,60 Irms Derating 0.175 max 4,45 110 0.055 1,40 0.050 1,27 XXX 120 0.140 3,56 0.090 2,29 100 80 Recommended Land Pattern 0.155 3,94 dia 70 60 0.215 5,46 0.040 1,02 0.170 min 4,32 90 0.115 max 2,92 50 40 0.070 1,78 25°C Percent of rated Irms 10 Current (A) 30 XXX 20 Dash number 10 0 -40 -20 0 20 40 60 80 Ambient temperature (°C) 100 120 140 Part marking since Feb. 2005. Parts manufactured prior to that date may have color dots. Visit www.coilcraft.com/colrpowr.cfm for color dot marking details. Dimensions are in inches mm US +1-847-639-6400 [email protected] UK +44-1236-730595 [email protected] Taiwan +886-2-2264 3646 [email protected] China +86-21-6218 8074 [email protected] Singapore + 65-6484 8412 [email protected] Document 177-2 Revised 08/16/12 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information.