Jing Heng MUR2049CT Glass passivated super fast rectifier Datasheet

MUR2020CT THRU MUR2060CT
R
GLASS PASSIVATED SUPER FAST RECTIFIER
Reverse Voltage - 200 -600 Volts
Forward Current - 20.0Amperes
S E M I C O N D U C T O R
FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-0
Fast switching for high efficiency
Low forward voltage drop
Single rectifier construction
High surge capability
For use in low voltage ,high frequency inverters,
JF
MUR2020CT
free wheeling ,and polarity protection applications
High temperature soldering guaranteed:260°C/10 seconds,
0.25"(6.35mm)from case
Component in accordance to RoHS 2011/65/EU
TO-220AB
0.185(4.70)
0.410(10.41)
0.140(4.10)
0.390(9.91)
0.147(3.74)
DIA
0.175(4.44)
0.055(1.39)
0.045(1.14)
0.114(2.90)
0.102(2.60)
0.283(7.20)
0.244(6.20)
PIN
2
1
3
1.161(29.50)
0.159(4.05)
0.114(2.90)
1.106(28.10)
0.138(3.50)
0.560(14.22)
0.053(1.34)
0.516(13.10)
0.047(1.20)
0.037(0.94)
MECHANICAL DATA
0.027(0.68)
0.105(2.67)
0.023(0.58)
0.095(2.41)
Case: JEDEC TO-220AB molded plastic body
0.014(0.35)
0.208(5.28)
0.192(4.88)
Terminals: Lead solderable per MIL-STD-750,method 2026
Polarity: As marked
Mounting Position: Any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(Ratings at 25°C ambient temperature unless otherwise specified ,Single phase ,half wave ,resistive or inductive
load. For capacitive load,derate by 20%.)
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward
rectified current(see Fig.1)
Per leg
Total device
Peak forward surge current 8.3ms single half
sine-wave superimposed on rated load
(JEDEC method)
Maximum instantaneous forward voltage
at 10.0 A per leg(Note 1 )
Maximum instantaneous reverse
current at rated DC blocking
voltage(Note 1)
T A =25°C
TA =125°C
Maximum Reverse Recovery Time (Note 2)
Typical thermal resistance (Note 3)
Operating junction temperature range
Storage temperature range
0.098(2.50)
Symbols
MUR
2020CT
MUR
2040CT
MUR
2060CT
VRRM
VRMS
VDC
200
400
600
140
280
420
400
600
200
Units
Volts
Volts
Volts
I(AV)
10.0
20.0
Amps
IFSM
150.0
150
Amps
VF
0.975
1.3
5
IR
250
1.7
Volts
μA
35
ns
RθJC
2.5
°C/W
TJ
TSTG
-55 to+150
°C
-55 to+150
°C
Trr
Notes: 1. Pulse test: 300μs pulse width,1% duty cycle
2. Reverse recovery test conditions IF=0.5A,IR=1.0A, Irr=0.25A
3. Thermal resistance from junction to case
JINAN JINGHENG ELECTRONICS CO., LTD.
9-34
HTTP://WWW.JINGHENGGROUP.COM
RATINGS AND CHARACTERISTIC CURVES MUR2020CT THRU MUR2060CT
FIG.2-MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
PEAK FORWARD SURGE CURRENT(AMPERES)
AVERAGE FORWARD CURRENT
AMPERES
FIG.1-FORWARD CURRENT DERATING CURVE
24
20
RESISTIVE OR INDUCTVE LOAD
16
12
8
4
0
0
20
40
60
80
100
120
180
150
LEAD TEMPERATURE (°C)
175
8.3ms Single Half Sine-Wave
(JEDEC Method)
150
125
100
75
50
25
0
1
2
5
100
50
20
FIG.4-TYPICAL REVERSE CHARACTERISTICS
20
50
10
200V
400V
10
INSTANTANEOUS REVERSE CURRENT (uA)
INSTANTANEOUS FORWARD CURRENT( AMPERES)
10
NUMBER OF CYCLES AT 60Hz
FIG.3-TYPICAL INSTANTANEOUS FORWARD
CHARACTERISTICS
600V
PULSE WIDTH=300μS
1% DUTY CYCLE
1
0.1
TJ=100°C
1
TJ=25°C
0.1
0.01
0.01
0
0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4
0.001
INSTANTANEOUS FORWARD VOLTAGE (VOLTS)
0
20
40
60
80
100
PERCENT OF RATED PEAK REVERSE VOLTAGE%
FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE
TRANSIENT THERMAL IMPEDANCE, C/ W
FIG.5-TYPICAL JUNCTION CAPACITANCE
JUNCTION CAPACITANCE(pF)
4000
TJ=25°C
f=1.0MHZ
Vsig=50mVp-p
1000
100
0.1
1
10
100
REVERSE VOLTAGE. VOLTS
JINAN JINGHENG ELECTRONICS CO., LTD.
100
10
1
0.1
0.01
0.1
1
10
100
T, PULSE DURATION ,sec.
9-35
HTTP://WWW.JINGHENGGROUP.COM
Similar pages