Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Surface Mount Type Series : ZC Type : V High temperature Lead-Free reflow Features ● Endurance: 4000 h at 125 °C (High temperature / Long life) ● Low ESR and high ripple current (85 % over, Lower ESR than current V-TP) ● High-withstand voltage (25 V.DC to 80 V.DC), Low LC (0.01 CV or 3 μA) ● Equivalent to conductive polymer type aluminum electrolytic capacitor (There are little characteristics change by temperature and frequency) available upon request. (08 mm and larger) ● Vibration-proof product is ● AEC-Q200 compliant ● RoHS directive compliant Specifications Size code C D D8 F G Category temp. range –55 °C to +125 °C Rated voltage range 25 V.DC to 50 V.DC 25 V.DC to 63 V.DC 25 V.DC to 80 V.DC Nominal cap.range 10 μF to 33 μF 10 μF to 56 μF 22 μF to 100 μF 22 μF to 220 μF 33 μF to 330 μF Capacitance tolerance ±20 % (120 Hz/+20 °C) DC leakage current I < 0.01 CV or 3 (μA) After 2 minutes (whichever is greater) Dissipation factor (tan d) Please see the attached standard products list 125 °C, 4000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within ±30% of the initial value Endurance 1 tan d < 200 % of the initial limit E. S. R. < 200 % of the initial limit DC leakage current Within the initial limit 125 °C, 3000 h, apply the rated ripple current without exceeding the rated voltage Capacitance change Within ±30% of the initial value Endurance 2 tan d < 200 % of the initial limit E. S. R. < 300 % of the initial limit DC leakage current Within the initial limit After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, Shelf life capacitors shall meet the limits specified in Endurance. (With voltage treatment) 85 °C, 85 % to 90 %, 2000 h, rated voltage applied Capacitance change Within ±30% of the initial value Damp heat (Load) tan d < 200 % of the initial limit E. S. R. < 200 % of the initial limit DC leakage current Within the initial limit After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change Within ±10% of the initial value Resistance to soldering heat tan d Within the initial limit DC leakage current Within the initial limit Series identification L Pressure relief (010 and larger) + (P) (I) Capacitance (μF) B±0.2 Negative polarity marking (–) 33 E ZC A±0.2 – (I) 0.3 max. Marking color : BLACK 0D±0.5 Example : 25 V.DC 33 μF K Dimensions (not to scale) H Marking W ( ) Reference size (Unit : mm) Rated voltage mark Lot number Rated voltage mark E V H 25 V.DC 35 V.DC 50 V.DC J K 63 V.DC 80 V.DC Size code D L A, B C 5.0 5.8±0.3 5.3 D 6.3 5.8±0.3 6.6 D8 6.3 7.7±0.3 6.6 F 8.0 10.2±0.3 8.3 G 10.0 10.2±0.3 10.3 H 6.5 max. 7.8 max. 7.8 max. 10.0 max. 12.0 max. I 2.2 2.6 2.6 3.4 3.5 W 0.65±0.1 0.65±0.1 0.65±0.1 0.90±0.2 0.90±0.2 P 1.5 1.8 1.8 3.1 4.6 K 0.15 0.35 +- 0.20 0.15 0.35 +- 0.20 0.15 0.35 +- 0.20 0.70±0.2 0.70±0.2 · The dimensions of the vibration-proof products, please refer to the page of the mounting specification. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Nov. 2016 Conductive Polymer Hybrid Aluminum Electrolytic Capacitors Standard products Endurance 1 : 125 °C 4000 h Endurance 2 : 125 °C 3000 h CapaciRated tance voltage (±20 %) (V.DC) (μF) 25 35 50 63 80 33 56 100 220 330 22 47 68 150 270 10 22 33 68 100 120 10 22 33 56 68 22 33 47 Case size (mm) fD L 5 6.3 6.3 8 10 5 6.3 6.3 8 10 5 6.3 6.3 8 10 10 6.3 6.3 8 10 10 8 10 10 5.8 5.8 7.7 10.2 10.2 5.8 5.8 7.7 10.2 10.2 5.8 5.8 7.7 10.2 10.2 10.2 5.8 7.7 10.2 10.2 10.2 10.2 10.2 10.2 Specification Size code C D D8 F G C D D8 F G C D D8 F G G D D8 F G G F G G Ripple current ESR (100 kHz) tand (100 kHz) (+125 °C) (120 Hz) (+20 °C) (mA r.m.s.) (+20 °C) (mΩ) Endurance 1 Endurance 2 550 – 80 0.14 900 – 50 0.14 1400 – 30 0.14 1600 1900 27 0.14 2000 2900 20 0.14 550 – 100 0.12 900 – 60 0.12 1400 – 35 0.12 1600 1900 27 0.12 2000 2800 20 0.12 500 – 120 0.10 750 – 80 0.10 1100 – 40 0.10 1250 – 30 0.10 1600 – 28 0.10 1600 – 28 0.10 700 – 120 0.08 900 – 80 0.08 1100 – 40 0.08 1400 – 30 0.08 1400 – 30 0.08 1050 – 45 0.08 1360 – 36 0.08 1360 – 36 0.08 Min. packaging q'ty Part number Standard Product Vibration-proof product Taping (pcs) EEHZC1E330R EEHZC1E560P EEHZC1E101XP EEHZC1E221P EEHZC1E331P EEHZC1V220R EEHZC1V470P EEHZC1V680XP EEHZC1V151P EEHZC1V271P EEHZC1H100R EEHZC1H220P EEHZC1H330XP EEHZC1H680P EEHZC1H101P EEHZC1H121P EEHZC1J100P EEHZC1J220XP EEHZC1J330P EEHZC1J560P EEHZC1J680P EEHZC1K220P EEHZC1K330P EEHZC1K470P – – – EEHZC1E221V EEHZC1E331V – – – EEHZC1V151V EEHZC1V271V – – – EEHZC1H680V EEHZC1H101V EEHZC1H121V – – EEHZC1J330V EEHZC1J560V EEHZC1J680V EEHZC1K220V EEHZC1K330V EEHZC1K470V 1000 1000 900 500 500 1000 1000 900 500 500 1000 1000 900 500 500 500 1000 900 500 500 500 500 500 500 · Please refer to the page of “Reflow profile” and “The taping dimensions”. Frequency correction factor for ripple current Rated capacitance C < 47 μF 47 μF < C < 150 μF 150 μF < C Frequency Rated capacitance C < 47 μF 47 μF < C < 150 μF 150 μF < C Frequency Rated capacitance C < 47 μF 47 μF < C < 150 μF 150 μF < C Frequency Rated capacitance C < 47 μF 47 μF < C < 150 μF 150 μF < C Frequency Correction factor Correction factor Correction factor Correction factor 100 Hz < f < 200 Hz 200 Hz < f < 300 Hz 300 Hz < f < 500 Hz 0.10 0.10 0.15 0.15 0.20 0.25 0.15 0.25 0.25 1 kHz < f < 2 kHz 0.30 0.40 0.45 10 kHz < f < 15 kHz 0.60 0.70 0.75 2 kHz < f < 3 kHz 0.40 0.45 0.50 3 kHz < f < 5 kHz 0.45 0.55 0.60 500 Hz < f < 1 kHz 0.20 0.30 0.30 5 kHz < f < 10 kHz 0.50 0.60 0.65 15 kHz < f < 20 kHz 20 kHz < f < 30 kHz 30 kHz < f < 40 kHz 0.65 0.70 0.75 0.75 0.80 0.80 0.80 0.85 0.85 40 kHz < f < 50 kHz 50 kHz < f < 100 kHz 100 kHz < f < 500 kHz 0.80 0.85 1.00 0.85 0.90 1.00 0.85 0.90 1.00 500 kHz < f 1.05 1.00 1.00 After endurance ESR (100 kHz, –40 °C) Size ESR (Ω) f5×5.8 2.0 f6.3×5.8 1.4 f6.3×7.7 0.8 f8×10.2 0.4 f10×10.2 0.3 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Nov. 2016