Purdy AND5RA Gaalas ultra bright red light emission surface mount package Datasheet

AND5RA
Ultra Bright LED Lamps: Type 2
Weight: 2.0 mg
Unit: mm
Product specifications contained herein may be changed without prior
notice. It is therefore advisable to contact Purdy Electronics before
proceeding with the design of equipment incorporating this product.
Cathode Index
AND5RA
GaAlAs Ultra Bright Red Light Emission
Surface Mount Package
3.2±0.2
2.2±0.1
R0.9±0.1
ø1.8±0.1
Features
• Small package size with dome lens
• RoHS Compliant
• 3.2(l) x 2.4 (w) x 2.6 (h) size
• Suitable for REFLOW soldering
• Recommended Forward Current: 10 mA
0.5±0.1
0.5±0.1
2.4±0.1
2.5±0.2
2.0
Maximum Ratings (Ta = 25°C)
Polarity
Characteristics
Symbol
Rating
Unit
Forward Current
IF
40
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
110
mW
Operating Temperature Range
TOpr
-40 to 85
°C
Storage Temperature Range
TSig
-40 to 90
°C
Electro-Optical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Minimum
Typical
Maximum
Unit
Forward Voltage
VF
IF = 20 mA
–
1.7
2.4
V
Reverse Current
IR
VR = 5 V
–
–
10
µA
Luminous Intensity
IV
IF = 20 mA
290
480
–
mcd
Peak Emission Wavelength
lP
IF = 20 mA
–
660
–
nm
Spectral Line Half Width
∆λ
IF = 20 mA
–
20
–
nm
Dominant Wavelength
λd
IF = 20 mA
–
643
–
nm
Full Viewing Angle
θ
IV = 1/2 Peak
–
30
–
degree
Precaution
Please be careful of the following:
1. Manual soldering: maximum temperature of iron tip: 260°C max.
Soldering time: within 5 sec. per solder-land
Soldering portion of lead: up to 1.6 mm from the body of the device
2. Reflow solder: recommended condition is as follows:
140 - 160°C
The following soldering patterns are
recommended for reflow soldering
230°C max.
more than 2 min.
Time
Reflow
4°C/sec.
max.
2.5
Temperature
10 sec. max.
2.5
2.0
2.5
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
6/12/07
AND5RA
GaAlAs Ultra Bright Red Light Emission
Ultra Bright LED Lamps: Type 2
IV – IF
IF – VF
1000
Ta = 25°C
500
Ta = 25°C
30
Luminous Intensity IV (mcd)
Forward Current IF (mA)
50
10
5
3
300
100
50
30
10+
1
1.5
1.6
1.7
1.8
1.9
1
2.0
3
Forward Voltage VF (V)
IV – TC
100
Relative Luminous Intensity – Wavelength
3
1.0
Relative Luminous Intensity
Relative Luminous Intensity
10
5
30 50
Forward Current IF (mA)
1
0.5
0.3
0.1
-20
0
20
40
60
IF = 20 mA
Ta = 25°C
0.8
0.6
0.4
0.2
0
580
80
600
620
640
660
680
700
Wavelength λ (nm)
Case Temperature TC (°C)
Radiation Pattern
IF – Ta
20°
10°
0°
10°
Ta = 25°C
20°
30°
30°
40°
40°
50°
50°
60°
60°
70°
70°
80°
80°
Allowable Forward Current IF (mA)
40
30
20
10
90°
90°
0
0.2
0.4
0.6
0.8
0
0
20
40
60
80
Ambient Temperature Ta (°C)
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com
100
6/12/07
Similar pages