Part Number: www.SunLED.com LME11W T-1 (3mm) SOLID STATE LAMP Features ●LOW POWER CONSUMPTION. ●POPULAR T-1 DIAMETER PACKAGE. ●GENERAL PURPOSE LEADS. ●RELIABLE AND RUGGED. ●LONG LIFE - SOLID STATE RELIABILITY. ●AVAILABLE ON TAPE AND REEL. ●RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ± 0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. Absolute Maximum Ratings (TA=25°C) ME (InGaAlP) Unit 2.0 V mA Forward Voltage (Max.) (IF=20mA) VF 2.5 V 195 mA Reverse Current (Max.) (VR=5V) IR 10 uA PT 75 mW λP 630 nm TA -40 ~ +85 Wavelength of Peak Emission (Typ.) (IF=20mA) Tstg -40 ~ +85 Wavelength of Dominant Emission (Typ.) (IF=20mA) λD 621 nm Spectral Line Full Width At Half-Maximum (Typ.) (IF=20mA) Δλ 20 nm Capacitance (Typ.) (VF=0V, f=1MHz) C 25 pF 5 V Forward Current IF 30 Forward Current (Peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS Power Dissipation Operating Temperature Lead Solder Temperature [2mm Below Package Base] 260°C For 3 Seconds Lead Solder Temperature [5mm Below Package Base] 260°C For 5 Seconds LME11W Unit VF VR Part Number ME (InGaAlP) Forward Voltage (Typ.) (IF=20mA) Reverse Voltage Storage Temperature Operating Characteristics (TA=25°C) Emitting Color Red Published Date : MAR 25,2008 Emitting Material InGaAlP °C Luminous Intensity (IF=20mA) mcd Lens-color Water Clear Drawing No : SDSA3519 V3 min. typ. 900 1990 Wavelength nm λP Viewing Angle 2 θ 1/2 630 34 ° Checked : B.L.LIU P.1/4 Part Number: www.SunLED.com LME11W T-1 (3mm) SOLID STATE LAMP ME Published Date : MAR 25,2008 Drawing No : SDSA3519 V3 Checked : B.L.LIU P.2/4 Part Number: www.SunLED.com LME11W T-1 (3mm) SOLID STATE LAMP Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity / luminous flux or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity / luminous flux: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAR 25,2008 Drawing No : SDSA3519 V3 Checked : B.L.LIU P.3/4 Part Number: www.SunLED.com T-1 (3mm) SOLID STATE LAMP PACKING & LABEL SPECIFICATIONS Published Date : MAR 25,2008 LME11W Drawing No : SDSA3519 LME11W V3 Checked : B.L.LIU P.4/4