MPS2222, MPS2222A MPS2222A is a Preferred Device General Purpose Transistors NPN Silicon http://onsemi.com Features • Pb−Free Packages are Available* COLLECTOR 3 MAXIMUM RATINGS Rating Symbol Collector −Emitter Voltage Value VCEO MPS2222 MPS2222A Collector −Base Voltage Vdc 30 40 1 EMITTER VCBO MPS2222 MPS2222A Emitter −Base Voltage Vdc 60 75 VEBO MPS2222 MPS2222A Vdc 5.0 6.0 Collector Current − Continuous IC Total Device Dissipation @ TA = 25°C Derate above 25°C PD Total Device Dissipation @ TC = 25°C Derate above 25°C PD Operating and Storage Junction Temperature Range 2 BASE Unit TJ, Tstg 600 mAdc 625 5.0 mW mW/°C 1.5 12 W mW/°C −55 to +150 °C TO−92 CASE 29 STYLE 1 12 1 3 STRAIGHT LEAD BULK PACK 2 3 BENT LEAD TAPE & REEL AMMO PACK MARKING DIAGRAMS THERMAL CHARACTERISTICS Characteristic Symbol Max Unit Thermal Resistance, Junction−to−Ambient RqJA 200 °C/W Thermal Resistance, Junction−to−Case RqJC 83.3 °C/W Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. MPS2222 MPS2222A MPS 2222 AYWW G G MPS2 222A AYWW G G A = Assembly Location Y = Year WW = Work Week G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. © Semiconductor Components Industries, LLC, 2007 March, 2007 − Rev. 3 1 Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MPS2222/D MPS2222, MPS2222A ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector −Emitter Breakdown Voltage (IC = 10 mAdc, IB = 0) MPS2222 MPS2222A V(BR)CEO 30 40 − − Vdc Collector −Base Breakdown Voltage (IC = 10 mAdc, IE = 0) MPS2222 MPS2222A V(BR)CBO 60 75 − − Vdc Emitter −Base Breakdown Voltage (IE = 10 mAdc, IC = 0) MPS2222 MPS2222A V(BR)EBO 5.0 6.0 − − Vdc Collector Cutoff Current (VCE = 60 Vdc, VEB(off) = 3.0 Vdc) MPS2222A ICEX − 10 nAdc − − − − 0.01 0.01 10 10 ICBO mAdc Collector Cutoff Current (VCB = 50 Vdc, IE = 0) (VCB = 60 Vdc, IE = 0) (VCB = 50 Vdc, IE = 0, TA = 125°C) (VCB = 50 Vdc, IE = 0, TA = 125°C) MPS2222 MPS2222A MPS2222 MPS2222A Emitter Cutoff Current (VEB = 3.0 Vdc, IC = 0) MPS2222A IEBO − 100 nAdc Base Cutoff Current (VCE = 60 Vdc, VEB(off) = 3.0 Vdc) MPS2222A IBL − 20 nAdc 35 50 75 35 100 50 30 40 − − − − 300 − − − − − − − 0.4 0.3 1.6 1.0 − 0.6 − − 1.3 1.2 2.6 2.0 250 300 − − − 8.0 − − 30 25 2.0 0.25 8.0 1.25 − − 8.0 4.0 50 75 300 375 5.0 25 35 200 − 150 − 4.0 ON CHARACTERISTICS DC Current Gain (IC = 0.1 mAdc, VCE = 10 Vdc) (IC = 1.0 mAdc, VCE = 10 Vdc) (IC = 10 mAdc, VCE = 10 Vdc) (IC = 10 mAdc, VCE = 10 Vdc, TA = −55°C) (IC = 150 mAdc, VCE = 10 Vdc) (Note 1) (IC = 150 mAdc, VCE = 1.0 Vdc) (Note 1) (IC = 500 mAdc, VCE = 10 Vdc) (Note 1) hFE MPS2222A only MPS2222 MPS2222A Collector −Emitter Saturation Voltage (Note 1) (IC = 150 mAdc, IB = 15 mAdc) MPS2222 MPS2222A MPS2222 MPS2222A (IC = 500 mAdc, IB = 50 mAdc) Base −Emitter Saturation Voltage (Note 1) (IC = 150 mAdc, IB = 15 mAdc) MPS2222 MPS2222A MPS2222 MPS2222A (IC = 500 mAdc, IB = 50 mAdc) VCE(sat) VBE(sat) − Vdc Vdc SMALL−SIGNAL CHARACTERISTICS Current −Gain − Bandwidth Product (Note 2) (IC = 20 mAdc, VCE = 20 Vdc, f = 100 MHz) MPS2222 MPS2222A Output Capacitance (VCB = 10 Vdc, IE = 0, f = 1.0 MHz) fT Cobo Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) MPS2222 MPS2222A Input Impedance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 10 mAdc, VCE = 10 Vdc, f = 1.0 kHz) MPS2222A MPS2222A Voltage Feedback Ratio (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 10 mAdc, VCE = 10 Vdc, f = 1.0 kHz) MPS2222A MPS2222A Small−Signal Current Gain (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 10 mAdc, VCE = 10 Vdc, f = 1.0 kHz) MPS2222A MPS2222A Output Admittance (IC = 1.0 mAdc, VCE = 10 Vdc, f = 1.0 kHz) (IC = 10 mAdc, VCE = 10 Vdc, f = 1.0 kHz) MPS2222A MPS2222A Collector Base Time Constant (IE = 20 mAdc, VCB = 20 Vdc, f = 31.8 MHz) MPS2222A Noise Figure (IC = 100 mAdc, VCE = 10 Vdc, RS = 1.0 kW, f = 1.0 kHz) MPS2222A Cibo hie hre hfe hoe rb′Cc MHz pF kW X 10− 4 − mmhos ps NF 1. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%. 2. fT is defined as the frequency at which |hfe| extrapolates to unity. http://onsemi.com 2 pF dB MPS2222, MPS2222A ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued) Symbol Min Max Unit (VCC = 30 Vdc, VBE(off) = −0.5 Vdc, IC = 150 mAdc, IB1 = 15 mAdc) (Figure 1) td − 10 ns tr − 25 ns (VCC = 30 Vdc, IC = 150 mAdc, IB1 = IB2 = 15 mAdc) (Figure 2) ts − 225 ns tf − 60 ns Characteristic SWITCHING CHARACTERISTICS MPS2222A only Delay Time Rise Time Storage Time Fall Time SWITCHING TIME EQUIVALENT TEST CIRCUITS +30 V +30 V 1.0 to 100 ms, DUTY CYCLE ≈ 2.0% +16 V 0 −2 V 200 1.0 to 100 ms, DUTY CYCLE ≈ 2.0% +16 V 0 1 kW < 2 ns 1k −14 V CS* < 10 pF 200 < 20 ns CS* < 10 pF 1N914 −4 V Scope rise time < 4 ns *Total shunt capacitance of test jig, connectors, and oscilloscope. Figure 1. Turn−On Time Figure 2. Turn−Off Time hFE , DC CURRENT GAIN 1000 700 500 TJ = 125°C 300 200 25°C 100 70 50 −55°C 30 VCE = 1.0 V VCE = 10 V 20 10 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 20 IC, COLLECTOR CURRENT (mA) Figure 3. DC Current Gain http://onsemi.com 3 30 50 70 100 200 300 500 700 1.0 k VCE , COLLECTOR−EMITTER VOLTAGE (VOLTS) MPS2222, MPS2222A 1.0 TJ = 25°C 0.8 0.6 IC = 1.0 mA 10 mA 150 mA 500 mA 0.4 0.2 0 0.005 0.01 0.02 0.03 0.05 0.1 0.2 0.3 0.5 1.0 IB, BASE CURRENT (mA) 2.0 3.0 5.0 10 20 30 50 Figure 4. Collector Saturation Region 200 500 IC/IB = 10 TJ = 25°C tr @ VCC = 30 V td @ VEB(off) = 2.0 V td @ VEB(off) = 0 30 20 10 7.0 5.0 200 t′s = ts − 1/8 tf 100 70 50 tf 30 20 10 7.0 5.0 3.0 2.0 5.0 7.0 10 200 300 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) 500 5.0 7.0 10 Figure 5. Turn −On Time 300 500 10 RS = OPTIMUM RS = SOURCE RS = RESISTANCE IC = 1.0 mA, RS = 150 W 500 mA, RS = 200 W 100 mA, RS = 2.0 kW 50 mA, RS = 4.0 kW f = 1.0 kHz 8.0 NF, NOISE FIGURE (dB) NF, NOISE FIGURE (dB) 6.0 20 30 50 70 100 200 IC, COLLECTOR CURRENT (mA) Figure 6. Turn −Off Time 10 8.0 VCC = 30 V IC/IB = 10 IB1 = IB2 TJ = 25°C 300 t, TIME (ns) t, TIME (ns) 100 70 50 4.0 2.0 IC = 50 mA 100 mA 500 mA 1.0 mA 6.0 4.0 2.0 0 0.01 0.02 0.05 0.1 0.2 0.5 1.0 2.0 5.0 10 20 0 50 50 100 100 200 500 1.0 k 2.0 k 5.0 k 10 k 20 k f, FREQUENCY (kHz) RS, SOURCE RESISTANCE (OHMS) Figure 7. Frequency Effects Figure 8. Source Resistance Effects http://onsemi.com 4 50 k 100 k 30 CAPACITANCE (pF) 20 Ceb 10 7.0 5.0 Ccb 3.0 2.0 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 REVERSE VOLTAGE (VOLTS) 20 30 50 f T, CURRENT−GAIN BANDWIDTH PRODUCT (MHz) MPS2222, MPS2222A 500 VCE = 20 V TJ = 25°C 300 200 100 70 50 1.0 Figure 9. Capacitances 2.0 3.0 5.0 7.0 10 20 30 IC, COLLECTOR CURRENT (mA) 50 70 100 Figure 10. Current−Gain Bandwidth Product 1.0 +0.5 TJ = 25°C 0 VBE(sat) @ IC/IB = 10 0.6 COEFFICIENT (mV/ °C) V, VOLTAGE (VOLTS) 0.8 1.0 V VBE(on) @ VCE = 10 V 0.4 0.2 RqVC for VCE(sat) −0.5 −1.0 −1.5 RqVB for VBE −2.0 VCE(sat) @ IC/IB = 10 0 0.1 0.2 50 100 200 0.5 1.0 2.0 5.0 10 20 IC, COLLECTOR CURRENT (mA) −2.5 500 1.0 k 0.1 0.2 Figure 11. “On” Voltages 0.5 1.0 2.0 5.0 10 20 50 100 200 IC, COLLECTOR CURRENT (mA) 500 Figure 12. Temperature Coefficients ORDERING INFORMATION Package Shipping† TO−92 (Pb−Free) 5000 Units / Bulk TO−92 2000 / Tape & Ammo Box TO−92 (Pb−Free) 2000 / Tape & Ammo Box TO−92 5000 Units / Bulk MPS2222AG TO−92 (Pb−Free) 5000 Units / Bulk MPS2222ARLG TO−92 (Pb−Free) 2000 / Tape & Reel TO−92 2000 / Tape & Reel MPS2222ARLRAG TO−92 (Pb−Free) 2000 / Tape & Reel MPS2222ARLRMG TO−92 (Pb−Free) 2000 / Tape & Reel MPS2222ARLRPG TO−92 (Pb−Free) 2000 / Tape & Ammo Box Device MPS2222G MPS2222RLRP MPS2222RLRPG MPS2222A MPS2222ARLRA †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. http://onsemi.com 5 MPS2222, MPS2222A PACKAGE DIMENSIONS TO−92 (TO−226) CASE 29−11 ISSUE AM A B STRAIGHT LEAD BULK PACK R P L SEATING PLANE K D X X G J H V C SECTION X−X 1 N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. DIM A B C D G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.021 0.045 0.055 0.095 0.105 0.015 0.020 0.500 −−− 0.250 −−− 0.080 0.105 −−− 0.100 0.115 −−− 0.135 −−− MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.407 0.533 1.15 1.39 2.42 2.66 0.39 0.50 12.70 −−− 6.35 −−− 2.04 2.66 −−− 2.54 2.93 −−− 3.43 −−− N A R BENT LEAD TAPE & REEL AMMO PACK B P NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. T SEATING PLANE K D X X G J V 1 C SECTION X−X DIM A B C D G J K N P R V MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.40 0.54 2.40 2.80 0.39 0.50 12.70 −−− 2.04 2.66 1.50 4.00 2.93 −−− 3.43 −−− N STYLE 1: PIN 1. EMITTER 2. BASE 3. COLLECTOR ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5773−3850 http://onsemi.com 6 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MPS2222/D