ITT H20307RR05Q Power rota-slide rotary switch Datasheet

C&K H Series
Power ROTA-SLIDE Rotary Switches
®
Features/Benefits
• Multi-pole and multi-position
• Positive detent
• Power switching up to 12 AMPS
• Value added capability
Typical Applications
• Small appliances
• Industrial equipment
• Elevators
Models Available
Specifications
Materials
CONTACT RATING: 12 Amps @ 125 V AC; 6 AMPS @ 250 V AC;
1 AMP @ 125 V DC (UL/CSA).
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
INSULATION RESISTANCE: 109 Ω min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
INDEXING: 45º-one contact models, 8 positions max.; two contact
models, 4 positions max.
OPERATING & STORAGE TEMPERATURE: -30ºC to 95ºC
HOUSING & BUSHING: 6/6 nylon (UL 94V-2).
ACTUATOR: 6/6 nylon (UL 94V-2).
CONTACTS & TERMINALS: Copper, silver plated.
CONTACT SPRING: Music wire or stainless steel.
MOUNTING NUT: Steel, zinc plated.
TERMINAL SEAL: Epoxy.
NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to:
www.ittcannon.com/rohs.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages L-46 thru L-47. For additional options not shown in catalog, consult Customer Service Center.
L
Rotary
Switch Function
H203 DP, 45° Index, 3 pos.
H101 SPST, 45° Index
H202 DPDT, 45° Index
H204 DP, 45° Index, 4 pos.
Actuator
07 .275" high with .156" flat
Mounting Style
RR 3/8-40 threaded bushing
Terminations
05 .110" quick connect
01 Solder lug with notch
Contact Material
Q Silver
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
L–45
www.ittcannon.com
C&K H Series
Power ROTA-SLIDE® Rotary Switches
SWITCH FUNCTION
DP MODELS 45º INDEXING
SP MODELS 45º INDEXING
NO.
POLES
MODEL
NO.
SWITCH
FUNCTION
SP
H101
SPST
NO.
POLES
TERMINALS
8-1
DP
MODEL
NO.
SWITCH
FUNCTION
H202
DPDT
7-8-1, 3-4-5
H203
3 Position
All Terminals
H204
4 Position
All Terminals
TERMINALS
DP MODELS 45º INDEXING
SCHEMATIC
SP MODELS 45º INDEXING
SCHEMATIC
NOTE: Break-before-make contacts. Terminal numbers are molded
on bottom of housing. Actuators and contacts are shown in position 1.
No common terminal is present. Switching function is provided by
movable contacts shorting adjacent pairs of stationary contacts.
All models
with all options.
Rotary
L
Part number shown: H10107RR05Q
ACTUATOR
07
.275" HIGH WITH .156" FLAT
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
L–46
www.ittcannon.com
C&K H Series
Power ROTA-SLIDE Rotary Switches
®
MOUNTING STYLE
RR
3/8-32 THREADED BUSHING
PANEL MOUNTING
Mounting nut included (part number 175000100).
TERMINATIONS
05
01
SOLDER LUG WITH HOLE
SOLDER LUG WITH NOTCH
Not available on models with 90º indexing.
CONTACT MATERIAL
OPTION
CODE
Q
RoHS
COMPLIANT*
YES
RoHS
COMPATIBLE*
YES
CONTACT AND
TERMINAL MATERIAL
SILVER
1
RATING
POWER
L
12 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC.
1
CONTACTS & TERMINALS: Copper, silver plated.
NOTE: Any models supplied with Q contact material are RoHS compliant. For the
latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs.
All models
with all options.
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
L–47
www.ittcannon.com
Rotary
* Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications.
Similar pages