NX Coil Parameter NX R C 15.0 7.5 9.4 US Coil voltage VDC E169380 Features DIL pitch terminals .Surface mount type with L shaped teminal; Conforms to FCC Part 68 2.5kV Surge and Dielectric 1500VAC; High contact capacity 2A/30VDC; Application for Telecommunication Equipment,Office Equipment, Security Alarm Systems, Measuring instruments, Medical Monitoring Equipment,Audio Visual Equipment, Flight Simulator,Sensor Control. Pick up voltage VDC(max) (75%of rated voltage ) NX 2 SA 1 2 3 L H 12 W 4 5 6 7 1 Part number NX 2 Contact arrangement 2:2C 3 Mount NIL:DIL SA: Standard SMT SL: High connection reliability SMT 4 Operating function Nil: Single Side Stable L:1 Coil Latching 5 Terminal NIL: Standard DIL or SMT H:Self-clinching terminal 6 Coil rated Voltage(V) DC:3,4.5,5,6,9,12,24 7 Contact Material NIL:AgPd W:AgNi Coil power W Rated Max. NX2SA-003 3 4.5 64.3 2.25 0.3 0.14 NX2SA-004 4.5 6.7 145 3.38 0.45 0.14 NX2SA-005 5 7.5 178 3.75 0.5 0.14 NX2SA-006 6 9.0 257 4.50 0.6 0.14 NX2SA-009 9 13.5 579 6.75 0.9 0.14 NX2SA-012 12 18.0 1028 9.00 1.2 0.14 NX2SA-024 24 36.0 2880 18.0 2.4 0.20 1 Coil Latching Ordering Information Release voltage VDC(min) (10% of rated voltage) Coil resistance 10% Dash Numbers Operate Time ms 4 Reset(Max) NX2SAL-003 3 4.5 90 2.25 Release /Reset Time ms 4 Reset -2.25 0.10 NX2SAL-004 4.5 6.7 202.5 3.38 -3.38 0.10 NX2SAL-005 5 7.5 250 3.75 -3.75 0.10 NX2SAL-006 6 9.0 360 4.50 -4.50 0.10 NX2SAL-009 9 13.5 810 6.75 -6.75 0.10 NX2SAL-012 NX2SAL-024A 12 24 18.0 36.0 1440 3840 9.00 18.0 -9.00 -18.0 0.10 0.15 NX2SL-003 3 4.5 64.3 2.25 0.3 0.14 NX2SL-004 4.5 6.7 145 3.38 0.45 0.14 NX2SL-005 5 7.5 178 3.75 0.5 0.14 4 4 4 4 Contact Data Contact Arrangement Contact Material Contact Rating (resistive) Max. Switching Power Max. Switching Voltage Contact Resistance or Voltage drop 2C DPDT(B-M) AgPd( Gold clad ) AgNi( Gold clad ) 2A/30VDC 0.5A/125VAC 60W, 62.5VA Min. Switching load 0.01mA/10mV Reference Value 220VDC, 250VAC Max. Switching Current:2A Operational 1A/30VDC 5 105 2A/30VDC 1 105 108 Electrical life Mechanical 70m (80 m SMT) Item 4.12 of IEC 61810-7 Item 4.30 of IEC 61810-7 Item 4.31 of IEC 61810-7 Relays previously tested or used above 10mA resistive at 6V maximum recommended for subsequent use in low level applications. DC or peak AC 9.0 257 4.50 0.6 0.14 13.5 579 6.75 0.9 0.14 NX2SL-012 12 18.0 1028 9.00 1.2 0.14 NX2SL-024 24 36.0 2880 18.0 2.4 0.20 Coil voltage VDC Rated NX2-003 3 Max. Coil resistance 10% 4.5 64.3 Pick up voltage VDC(max) (75%of rated voltage ) Release voltage VDC(min) (10% of rated voltage) Coil power W 2.25 0.3 0.14 NX2-004 4.5 6.7 145 3.38 0.45 0.14 NX2-005 5 7.5 178 3.75 0.5 0.14 NX2-006 6 9.0 257 4.50 0.6 0.14 NX2-009 9 13.5 579 6.75 0.9 0.14 NX2-012 12 18.0 1028 9.00 1.2 0.14 NX2-024 24 36.0 2880 18.0 2.4 0.20 1 Coil Latching Reset(Max) Reset open circuit are not Coil Parameter 35 6 9 1Coil Latching CAUTION: Dash numbers NX2SL-006 NX2SL-009 Operate Time ms 4 Release /Reset Time ms 3 4.5 90 2.25 -2.25 0.10 4.5 6.7 202.5 3.38 -3.38 0.10 NX2L-005 5 7.5 250 3.75 -3.75 0.10 NX2L-006 6 9.0 360 4.50 -4.50 0.10 NX2L-009 9 13.5 810 6.75 -6.75 0.10 NX2L-012 12 18.0 1440 9.00 -9.00 0.10 NX2L-024A 24 36.0 3840 18.0 -18.0 0.15 4.5 90 2.25 -2.25 0.10 4.5 6.7 202.5 3.38 -3.38 0.10 NX2SLL-005 5 7.5 250 3.75 -3.75 0.10 NX2SLL-006 6 9.0 360 4.50 -4.50 0.10 NX2SLL-009 9 13.5 810 6.75 -6.75 0.10 NX2SLL-012 12 18.0 1440 9.00 -9.00 0.10 NX2SLL-024A 24 36.0 3840 18.0 -18.0 0.15 4 4 4 4 Reset NX2L-004 3 NX2SLL-004 CAUTION: Reset(Max) NX2L-003 NX2SLL-003 1.The use of any coil voltage less than the rated coil voltage will compromise the operation of the relay. 2.Pickup and release(reset) voltage are for test purposes only and are not to be used as design criteria. 3.When latching relays are installed in equipment, the latch and reset coil should not be pulsed simultaneously. Coil should not be pulsed with less than the nominal coil voltage and pulse width should be a minimum of three times the specified operate time of the relay. If these conditions are not followed, it is possible for the relay to be in the magnetically neutral position . 4.Unless otherwise stated, the rated coil voltage specified in coil parameter and its suitable polarity(if applicable) shall be used for all tests and its application to the relay. 5.Soldering and mountion recommendations for NX as same as P series. 4 Ningbo Huaguan Electronics Corporation LTD. 36 NX Characteristics Between open Contacts 1000VAC 1min Between coil & Contacts 1500VAC 1min Between Contact Poles 1000VAC 1min Surge Withstand Voltage Between open Contacts Between coil & Contacts 1500V Dimensions Item 7 of IEC 61810-5 mm/inch 7.5max. 0.295max. 15max. 0.591max. 2500V 1.2 0.047 2 Functional:750m/s 11ms; Survival:1000 m/s2 6ms (-40~185 10 0.394 7.5max. 0.295max. 15max. 0.591max. IEC68-2-21 Test Ua1 IEC68-2-20 Test Ta method 1 SL F) 1.2 0.047 5.08 0.2 Soldering Pad (for Terminal) Temporary glue Pad (for SA type only) 0.5 0.02 2.54 0.1 Safety approvals UL&CUR 0.5A/125VAC Tolerance: 0.1/0.004 Mounting (Bottom view) 5.08 0.2 9.4 0.370 Tolerance: 0.1/0.004 Safety approval 2.54 0.1 15 0.591 0.25 0.01 IEC68-2-3 Test Ca 5% to 85% 2g Mass 5.08 0.2 IEC68-2-6 Test Fc 11.6 0457 -40~85 Temperature Range Relative Humidity 9.4 0.370 9.8max. 0.386max. Terminals strength Solderability 1 0.039 5.08 0.2 IEC68-2-27 Test Ea 10~55Hz Double amplitude Functional 3.3mm Survival:5mm 5N 235 2 3 0.5s Vibration resistance 0.5 0.02 2.54 0.1 0.35 0.014 Shock resistance 5.08 0.2 0.25 0.01 SA FCC68 FCC68 0.3 0.012 0.35 0.014 9.8max. 0.386max. Item 6 of IEC 61810-5 Item 6 of IEC 61810-5 3.16 0.124 min (at 500VDC) 1.6 0.063 1000M 7.24 0.285 Insulation Resistance Dielectric Strength Dimensions 2A/30VDC Dimensions mm/inch S R S: Set R: Reset (Bottom View) 15 0.591 7.5 0.295 9.4 0.370 2.54 0.1 2.54 0.1 0.35 0.014 5.08 0.2 0.25 0.01 4 8 12 10 9 8 Index mark (Reset Position) Tolerance: 0.1/0.004 Dimensions 3 9 8- 1 0.04 5.08 0.2 2.54 0.1 1 10 Index mark (De-energized Position) Wiring diagram(Bottom view) 0.5 0.02 3.5 0.138 1.2 0.047 12 5 Mounting (Bottom view) 1 3 4 NOTES 1).Dimensions are in millimeters. 2).Inch equivalents are given for general information only. 5 S R S: Set R: Reset (Bottom View) 12 10 9 8 Index mark (De-energized Position) 12 10 9 8 Index mark (Reset Position) Wiring diagram(Bottom view) NOTES 1).Dimensions are in millimeters. 2).Inch equivalents are given for general information only. 37 Ningbo Huaguan Electronics Corporation LTD. 38