Medical PSU FSP015-RCDM-NP DESCRIPTION This series of AC /DC wall mount switching power supplies are for 15 watts of continuous output power. They are enclosed in a 94V-1 rated polyphenylene-oxide case with four types of interchangeable AC plugs: European plug, UK plug and North American plugs. All models meet EN55011 and FC C class B emission limits, and are designed for medical application, not for life-supporting equipment. FEATURES Interchangeable AC plugs High efficiency Low ripple & noise Over voltage protection Short-circuit protection 100% burn-in at full rated load Standby consumption less than 0.3 W C ompliant with C EC and ENERGY STAR efficiency level V requirements C ompliant with RoHS requirements W ATTAGE Wattage: OUTPUT SPECIFICATION Ripple & Noise: Over Current Protection: 78.3mm(L) x 51.8mm(W) x 34.5mm(H) ENVIRONMENTAL SPECIFICATION TEMP.Range: INPUT SPECIFICATION Input Range: Input Frequency: Input Current: Leakage Current: Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500 us after a 25% step load change Protected to short circuit conditions 15W DIMENSION Dimension: SAFETY STANDARD APPAOVAL 90-264 Vdc 47-63 Hz 0.5A(rms) for115VAC , 0.3A(rms) for230VAC 100 µA max. @ 264 VAC ,63 Hz Operating Temperature:0°C to +40°C Storage Temperature: -20°C to + 85℃ OUTPUT ELECTRICAL Single Output: 12 V/ 1.25 A NOTES 1. FSP015-RxMM series are interchangeable AC plugs which are to be ordered separately. FSP015-RxDM-NP models are with fixed North American AC plug, and FSP015-RxEM models with fixed European AC plug. 2. Ripple and noise is maximum peak to peak voltage value measured at output within 20 MHz bandwidth, at rated line voltage and output load ranges, and with a 10 μF tantalum capacitor in parallel with a 0.1 μF ceramic capacitor across the output. This content is subject to change, please refer to specification for m ore detail. FSP reserve the right to change the content without prior notice