DC/DC Converters CTDD2210D-S Series Fixed Input Isolated & Unregulated 1W Output, Single Output Not shown at actual size. ctparts.com SPECIFICATIONS Part Number Input Voltage (VDC) Output Voltage (VDC) Output Current (mA) Input Curr.8 Full Load (mA) Input Curr.8 No Load (mA) Effi9 (%) CTDD2210D-0503S-1 CTDD2210D-0505S-1 CTDD2210D-0509S-1 CTDD2210D-0512S-1 CTDD2210D-0515S-1 CTDD2210D-0524S-1 5 5 5 5 5 5 3.3 5 9 12 15 24 300 200 111 84 67 42 274 274 268 255 253 253 21 21 20 20 20 20 73 73 75 78 79 79 CTDD2210D-1203S-1 CTDD2210D-1205S-1 CTDD2210D-1209S-1 CTDD2210D-1212S-1 CTDD2210D-1215S-1 CTDD2210D-1224S-1 12 12 12 12 12 12 3.3 5 9 12 15 24 300 200 111 84 67 42 112 112 105 102 102 102 11 11 10 10 10 10 74 74 79 82 82 82 CTDD2210D-2403S-1 CTDD2210D-2405S-1 CTDD2210D-2409S-1 CTDD2210D-2412S-1 CTDD2210D-2415S-1 CTDD2210D-2424S-1 24 24 24 24 24 24 3.3 5 9 12 15 24 300 200 111 84 67 42 58 58 52 50 50 50 10 10 6 5 5 5 72 72 80 83 83 83 CTDD2210D-4803S-1 CTDD2210D-4805S-1 CTDD2210D-4809S-1 CTDD2210D-4812S-1 CTDD2210D-4815S-1 CTDD2210D-4824S-1 48 48 48 48 48 48 3.3 5 9 12 15 24 300 200 111 84 67 42 28 28 27 25 25 25 3 3 3 3 2 2 74 74 77 83 83 83 8 Nominal Input Voltage 9 Nominal Input Volatge, Full Load FEATURES INPUT SPECIFICATIONS Efficiency: 70%-80% Isolation Voltage3: 1000 VDC min Isolation Resistance: 109 ohms min Isolation Capacitance: 80pF max. Switching Frequency: 50kHz min MTBF5: >2,000,000 hours Weight: 3.1g Typ. Case Material: Non-Conductive Plastic Case Size: 22.6mm x 9.9mm x 8.4mm Conducted Emissions: EN55022 Class A Radiated Emissions: EN55022 Class A Input Voltage Range: ±10% max Input Filter: Capacitor Typ Protection: Fuse Recommended OUTPUT SPECIFICATIONS ENVIRONMENTAL SPECIFICATIONS Operating Temperature: -25°C to +71°C Storage Temperature: -55°C to +125°C Humidity: 95% max Cooling: Free-Air Convection Output Power: 1W Voltage Setpoint Accuracy: ±2% max Temperature Coefficient: ±0.03%/°C Ripple & Noise(20MHz BW): 100mVp-p max Line Regulation1: ±1.2% max Load Regulation2: ±8% max Minimum Load: 10% of Full Load Short Circuit Protection: Momentary Transient Response4: 200uS max All specifications typical at nominal line, full load, and 25°C unless otherwise noted. TYPICAL CHARACTERISTICS High Line to Low Line. 2 Load Regulation is for output load current change from 20% to 100% 3 For 10 seconds 4 25% Step Load Change 5 MIL-HDBK-217 @25°C, Ground Benign 60.0 40.0 20.0 0.0 0 20 40 60 80 100 % Of Rated Load(%) Technologies 02.16.05 CENTRAL Derating Curve Output Power(W) 1 Efficiency(%) Efficiency Vs. Load 80.0 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice 1.2 0.9 0.3 Safe Operating Area 0.0 -25 0 0.6 25 50 TA(°C) 70 100 DC/DC Converters ctparts.com CTDD2210D-S Series Fixed Input Isolated & Unregulated 1W Output, Single Output OUTLINE DIMENSIONS & RECOMMENDED FOOTPRINT DETAILS CTDD2210D-S Package 3.81 9.9 16 1 12.7 22.6 11 10 9 6 7 8 2.54 7.62 8.4 Bottom View Side View CTDD2210D-S Footprint 2.54 Top View 16 11 10 9 6 1 7 2.54 8 ø0.8+0.2/-0 All dimensions in mm PIN CONNECTIONS Pin Function +Vin 1&16 -Vout 6&11 7&10 +Vout -Vin 8&9 16 1 11 10 9 6 7 8 CENTRAL Technologies 02.16.05 Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice