DC-6.0 GHz InGaP HBT Packaged Matched Gain Block Amplifier March 2007 - Rev 20-Mar-07 CGB7001-SP Functional Block Diagram (SOT-86) Features Low Operating Voltage: 5V 27.8 dBm Output IP3 @ 850 MHz 3.2 dB Noise Figure @ 850 MHz 20.2 dB Gain @ 850 MHz 14.0 dBm P1dB @ 850 MHz Low Performance Variation Over Temperature 100% DC On-Wafer Testing ESD Protection on All Die: >1000V HBM Low Thermal Resistance: <150ºC/Watt Ground 4 Input 1 3 Output Bias 2 Ground Absolute Maximum Ratings Max Device Voltage Max Device Current Max Device Dissipated Power RF Input Power Storage Temperature Junction Temperature Operating Temperature Thermal Resistance EDS (HBM) Description The CGB7001-SP is a Darlington Configured, high dynamic range, utility gain block amplifier. Designed for applications operating within the 0.1 to 6.0 GHz frequency range, Mimix’s broadband, cascadable, gain block amplifiers are ideal solutions for transmit, receive and IF applications. These MMIC amplifiers are available in bare die form or an industry standard SOT-86 package. Mimix's InGaP HBT technology and an industry low thermal resistance offers a thermally robust and reliable gain block solution. +5.5 V 110 mA 0.45 W +17 dBm -55ºC to 150ºC 150ºC -40ºC to +85ºC 150º C/W 1000 V Operation of this device above any of these parameters may cause permanent damage. The InGaP HBT die have extra pads to enable thorough DC testing. This unique test capability and the inclusion of ESD protection on all die, significantly enhances the quality, reliability and ruggedness of these products. Applications PA Driver Amp, IF Amp, LO Buffer Amp Cellular, PCS, GSM, UMTS Wireless Data and SATCOM Transmit and Receive Functions With a single bypass capacitor, optional RF choke and two DC blocking capacitors, this gain block amplifier offers significant ease of use in a broad range of applications. Electrical Characteristics Unless otherwise specified, the following specifications are guaranteed at room temperature in a Mimix test fixture. Parameter Small Signal Gain Output P1dB Output IP3 Noise Figure Operating Current Input Return Loss Output Return Loss Pout @ -45 dBc, ACP IS-95, 9 Forward Channels Temperature (ºC) Min. +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 +25 -40 to +85 19.2 18.9 13.0 11.0 26.3 24.8 32 28 11 10 13 12 850 MHz Typ. Max. 20.2 20.2 14.0 14.0 27.8 27.8 3.2 3.2 35 35 15 15 18 18 10.0 10.0 21.2 21.5 4.0 4.4 38 42 Notes: 1. Test Conditions in Mimix eval board, Vs = 5 V, Id = 35 mA Typ., Rbias = 27 2. Values reflect performance in recommended application circuit. Min. 15.7 15.4 12.4 11.2 25.8 25.3 32 28 9.0 8.5 12 11 1950 MHz Typ. Max. 16.7 16.7 13.4 13.4 27.3 27.3 3.4 3.4 35 35 12.5 12.5 17 17 10.0 10.0 , Zs = Zl = 50 17.7 18.0 4.2 4.6 38 42 Min. 14.4 14.1 11.5 11.0 24.4 23.9 32 28 8.5 8.0 11.5 10.5 2400 MHz Typ. Max. 15.4 15.4 12.5 12.5 25.9 25.9 3.6 3.6 35 35 12 12 16.5 16.5 16.4 16.7 4.4 4.8 38 42 Min. 3500 MHz Typ. 13.0 13.0 10.2 10.2 22.4 22.4 3.8 3.8 35 35 15 15 20 20 Max. Units dB dB dBm dBm dBm dBm dB dB mA mA dB dB dB dB dBm dBm , OIP3 tone spacing = 1 MHz, Pout per tone = 3 dBm. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 1 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-6.0 GHz InGaP HBT Packaged Matched Gain Block Amplifier March 2007 - Rev 20-Mar-07 CGB7001-SP Typical S-Parameter and Noise Performance |S21| Vs Frequency -5 25 C -40 C 85 C -10 25 C -40 C 85 C |S11| (dB) |S21| (dB) |S11| Vs Frequency 22 20 18 16 14 12 10 8 -15 -20 -25 0 1 2 3 4 5 0 6 1 2 Frequency (GHz) 4 5 6 |S22| Vs Frequency |S12| Vs Frequency -15 -5 |S22| (dB) -17 |S12| (dB) 3 Frequency (GHz) -19 -21 25 C -40 C 85 C -23 -25 25 C -40 C 85 C -10 -15 -20 -25 0 1 2 3 4 Frequency (GHz) 5 6 0 1 2 3 4 5 6 Frequency (GHz) Noise Figure Vs Frequency Noise Figure (dB) 5 25 C -40 C 85 C 4.5 4 3.5 3 2.5 0 0.5 1 1.5 2 2.5 3 3.5 Frequency (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-6.0 GHz InGaP HBT Packaged Matched Gain Block Amplifier March 2007 - Rev 20-Mar-07 CGB7001-SP Typical Power and Linearity Performance P1dB Vs Frequency OIP3 Vs Frequency 16 30 25 C -40 C 85 C 25 C -40 C 85 C 28 12 OIP3 (dBm) P1dB (dBm) 14 10 8 6 26 24 22 4 1 MHz separation, 3 dBm/tone 20 0 1 2 3 4 5 6 0 0.5 1 1.5 2 2.5 3 3.5 4 Frequency (GHz) Frequency (GHz) Linearity Performance - Base Station ACP – IS-95 Alt1 Ch. Pwr @ 850 MHz Vs Pout 9 Channels Forward, 1.98 MHz Offset 30 kHz BW ACP @ 850 MHz Vs Pout 9 Channels Forward, 750 kHz Offset 30 kHz BW -30 25 C -40 C 85 C -40 ACP (dBc) ACP (dBc) -35 -45 -50 -55 -60 -2 0 2 4 6 8 10 -55 -60 -65 -70 -75 -80 -85 -90 25 C -40 C 85 C -2 12 0 2 Pout (dBm) 6 8 10 12 Alt1 Ch. Pwr @ 1950 MHz Vs Pout 9 Channels Forward, 1.25 MHz Offset 12.5 kHz BW -40 25 C -40 C 85 C 25 C -40 C 85 C -50 ACP (dBc) ACP (dBc) ACP @ 1950 MHz Vs. Pout 9 Forward Channels, 885 kHz Offset 30 kHz BW -35 -40 -45 -50 -55 -60 -65 -70 -75 4 Pout (dBm) -60 -70 -2 0 2 4 6 8 Pout (dBm) 10 12 -80 -2 0 2 4 6 8 10 12 Pout (dBm) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-6.0 GHz InGaP HBT Packaged Matched Gain Block Amplifier March 2007 - Rev 20-Mar-07 CGB7001-SP Typical Scattering Parameters (Vd = +4.1V, Icc = 36 mA, T = 23°C, device in a 50 ohm system) Frequency (MHz) 100 200 300 400 500 600 700 800 900 1000 1200 1400 1600 1800 2000 2200 2400 2600 2800 3000 3200 3400 3600 3800 4000 4200 4400 4600 4800 5000 5200 5400 5600 5800 6000 6500 7000 7500 8000 8500 9000 9500 10000 (Mag) 0.132 0.133 0.135 0.137 0.139 0.141 0.143 0.145 0.147 0.149 0.153 0.156 0.159 0.162 0.163 0.165 0.167 0.168 0.169 0.170 0.171 0.172 0.172 0.172 0.171 0.170 0.168 0.167 0.165 0.163 0.160 0.158 0.155 0.154 0.152 0.151 0.158 0.171 0.191 0.221 0.251 0.283 0.313 S11 (Ang) -2 -4 -6 -9 -11 -14 -17 -20 -23 -27 -33 -40 -47 -54 -60 -67 -74 -80 -87 -93 -99 -106 -113 -120 -126 -133 -140 -147 -154 -162 -169 -177 175 166 157 134 109 83 60 38 18 1 -15 (Mag) 12.40 12.26 12.08 11.85 11.58 11.28 10.95 10.62 10.28 9.94 9.27 8.63 8.05 7.52 7.04 6.61 6.23 5.88 5.58 5.30 5.06 4.84 4.64 4.46 4.29 4.14 4.01 3.88 3.76 3.66 3.56 3.47 3.39 3.31 3.24 3.08 2.95 2.83 2.72 2.61 2.49 2.37 2.23 S21 (Ang) 173 166 159 153 147 140 134 129 123 118 107 98 89 81 73 65 58 51 44 37 31 24 18 12 6 0 -6 -12 -18 -24 -30 -36 -42 -47 -53 -68 -83 -98 -113 -129 -145 -161 -178 (Mag) 0.065 0.065 0.066 0.066 0.067 0.068 0.069 0.070 0.072 0.073 0.077 0.081 0.085 0.090 0.094 0.099 0.104 0.109 0.114 0.119 0.125 0.130 0.135 0.141 0.146 0.151 0.156 0.161 0.166 0.171 0.175 0.180 0.185 0.189 0.194 0.204 0.214 0.223 0.230 0.236 0.239 0.239 0.238 S12 (Ang) 1 2 3 4 5 6 6 7 7 8 8 8 8 7 6 4 3 1 -2 -4 -6 -9 -12 -15 -18 -21 -24 -27 -31 -34 -38 -41 -45 -48 -52 -61 -71 -81 -91 -102 -113 -124 -135 (Mag) S22 0.156 0.155 0.154 0.152 0.150 0.147 0.144 0.141 0.138 0.135 0.128 0.123 0.118 0.113 0.109 0.106 0.103 0.100 0.099 0.097 0.097 0.098 0.098 0.099 0.101 0.103 0.105 0.108 0.111 0.115 0.120 0.126 0.131 0.139 0.146 0.171 0.203 0.241 0.283 0.333 0.385 0.440 0.497 (Ang) -8 -14 -21 -28 -35 -42 -48 -54 -60 -66 -76 -86 -95 -104 -113 -120 -128 -134 -141 -148 -154 -160 -167 -174 180 173 166 159 153 145 138 131 124 117 110 93 77 60 45 30 16 2 -11 S-Parameter Data Files are available on-line at: www.mimixbroadband.com Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-6.0 GHz InGaP HBT Packaged Matched Gain Block Amplifier March 2007 - Rev 20-Mar-07 CGB7001-SP Application Circuit Note: This schematic represents the topology of the application circuit recommended by Mimix. R Bias = (Vs - Vd) / Id Vd R1 C3 4 uuuu Vs L1 1 RF IN C1 Ref Designator C1, C2 C3 Value 1000 pF 1.0 F L1 R1 C4 56 nH RF OUT 3 C2 2 Description MCH185A101JK VITR 1.0 F 25V CER CAP 0805 X7R 10% Coilcraft 0603 CS 10% R B ia s = ( V s - V d) / Id DNP ( Do Not P la ce) Size 0805 0805 0603 0805 / 1206 / 1210 N/A MIMIX Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-6.0 GHz InGaP HBT Packaged Matched Gain Block Amplifier March 2007 - Rev 20-Mar-07 CGB7001-SP Physical Dimensions - SP Package (SOT-86) 0.53 ±0.10 [0.021 ±0.004] 2.16 ±0.127 0.085 ±0.005 0° – 8° 45° 5.33 – 4.83 [0.210 – 0.190] PIN 1 2.67 ±0.13 [0.105 ±0.005] 4.59 – 5.46 [0.195 – 0.215] 2.54 ±0.13 [0.100 ±0.005] (3X) 1.52 ±0.127 0.060 ±0.005 7° (2X) 0.66 ±1.3 [0.026 ±0.005] 0.15 [0.060] SEATING PLANE 0.94 ±0.25 [0.037 ±0.010] DIMENSIONS IN MILLIMETERS [INCHES] 0.81 ±0.25 [0.032 ±0.010] (3X) 0.05 [0.002] +0.051 [0.0020] -0.038 [0.0015] TOLERANCE: .XX ±0.51 [0.02] .XXX ±0.51 [0.02] Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 6 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. DC-6.0 GHz InGaP HBT Packaged Matched Gain Block Amplifier March 2007 - Rev 20-Mar-07 CGB7001-SP Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes. Ordering Information Part Number for Ordering CGB7001-SP-0G00 CGB7001-SP-0G0T PB-CGB7001-SP-0000 Description SOT-86 surface mount package in bulk SOT-86 surface mount package in tape and reel Evaluation Board with SMA connectors for CGB7001-SP Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 7 of 7 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.