Fiber Optic Transmitter OPF672 , OPF673 Series Features: • • • • • Low cost 850 nm LED technology High thermal stability High optical coupling efficiency to multimode fiber Standard and low profile metal ST* style receptacles Industrial temperature range OPF672 OPF673 Description: The OPF672 and OPF673 series fiber optic transmitters are high performance devices packaged for data communication links. These transmitters are an 850 nm GaAlAs LED and are specifically designed to efficiently launch optical power into either 50/125µm or 62.5/125µm diameter multimode fiber. Three power ranges with upper and lower limits are offered, which allows the designer to select a device best suited for the application. The OPF672 is offered a standard profile, metal ST receptacle and the OPF673 is offered in a low profile version. These products combination of features including high speed and efficient coupled power makes it an ideal transmitter for integration into all types of data communications equipment. Ordering Information Applications: • • • • Industrial Ethernet equipment Part Number Intra-system fiber optic links OPF672-1; OPF673-1 LED Peak Wavelength 850nm Video surveillance systems OPF672-2; OPF673-2 OPF672-3; OPF673-3 850nm 850nm Copper-to-fiber media conversion RoHS PT50 (dBm) Min / Max -17.5/-15.2 Tr, Tf (ns) Typ / Max 8.0/10.0 -16.0/-13.0 -14.5/-11.5 8.0/10.0 8.0/10.0 OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 08/06 Page 1 of 3 Fiber Optic Transmitter OPF672, OPF673 Series Absolute Maximum Ratings TA = 25o C unless otherwise noted Storage Temperature Range -55° C to +100° C Operating Temperature Range -40° C to +85° C (1) 260° C (2) 100 mA Lead Soldering Temperature Continuous Forward Current Maximum Reverse Voltage 1.0 V Electrical/Optical Characteristics (TA = 25°C unless otherwise noted) SYMBOL PARAMETER Total Coupled Power, 50/125 µm Fiber, NA = 0.20 PT50 MIN MAX UNITS CONDITIONS OPF672-1, OPF673-1 -17.5 -15.2 dBm OPF672-2, OPF673-2 -16.0 -13.0 dBm OPF672-3, OPF673-3 -14.5 -11.5 dBm 2.1 V IF = 100 mA V IR = 100 µA nm IF = 50 mA nm IF = 50 mA ns IF = 100 mA; 10% to 90%(3) VF Forward Voltage 1.5 VR Reverse Voltage 1.8 Wavelength 830 λ TYP 850 ∆λ Optical Bandwidth 35 tr,tf Rise and Fall Time 8.0 870 10.0 IF = 100 mA Notes: 1. Maximum of 5 seconds with soldering iron. Duration can be extended to 10 seconds when flow soldering. RMA flux is recommended. 2. 3. 4. De-rate linearly at 1.0mA /°C above 25°C . No Pre-bias. All Optek fiber optic LED products are subjected to 100% burn-in as part of its quality control process. The burn-in conditions are 96 hours at 100mA drive current and 25°C ambient temperature. Relative Coupled Power vs Forward Current 1.2 2.0 Temperatures are Stepped in -40°C 20°C increments. 1.0 0.8 80°C 0.6 Temperatures are Stepped in 1.9 20°C increments. Relative Coupled Power Relative Coupled Power 1.4 Typical Forward Voltage vs Forward Current 1.8 1.7 1.6 -40°C 1.5 0.4 1.4 0.2 1.3 80°C 0 1.2 0 20 40 60 80 Forward Current (mA) 100 0 20 40 60 80 100 Forward Current (mA) OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. Issue A 08/06 Page 2 of 3 OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Fiber Optic Transmitter OPF672 , OPF673 Series Mechanical Outline OPF672-x OPF673-x OPTEK reserves the right to make changes at any time in order to improve design and to supply the best product possible. OPTEK Technology Inc. — 1645 Wallace Drive, Carrollton, Texas 75006 Phone: (972) 323-2200 or (800) 341-4747 FAX: (972) 323-2396 [email protected] www.optekinc.com Issue A 08/06 Page 3 of 3