BOARDCOM HCPL-2730 Optocoupler option 020 for 5000 v rms/1 minute requirement Datasheet

Optocoupler Option 020
for 5000 V rms/1 Minute Requirement
Data Sheet
OPTION 020
Description
Features
Option 020 consists of special construction on a wide
range of Avago plastic opto­couplers. After assembly,
each unit is subjected to an equiva­lent electrical perform­
ance test to ensure its capability to with­stand 5000 V rms
input to output for one minute. This test is recog­nized
by Underwriters Laboratory as proof that these compo­
nents may be used in many high voltage applications.
• Special Construction and Testing
DEVICE MARKING
TYPE NUMBER
HP
A XXXX L
YYWW
PIN
ONE
OPTION CODE
LETTER FOR
OPTION 020
• UL Recognition for 5000 V rms/1 Minute Require­ment
(File No. E55361)
Applications
Dielectric withstand voltage ratings are required by Un­
derwriters Laboratory when components are used in
certain types of electronic equipment. The voltage rat­
ing depends on the type of electronic equipment and
the specific application within the equipment. The 5000
V rms/1 Minute dielectric withstand voltage rating pro­
vided by Option 020 offers excellent high voltage input
to output protec­tion. Some applicable UL documents
are listed below.
DATE
CODE
UL Spec
Number Specification Title
114
347
508
544
773
916
1012
1244
1410
1950
Appliance and Business Equipment
High Voltage Industrial Control Equipment
Industrial Control Equipment
Medical and Dental Equipment
Plug-in, Locking Type Photocontrols
Standard for Energy Management Equipment
Power Supplies
Electrical and Electronic Measuring and
Testing Equipment
Television and Video Products
Information Technology Equipment Including
Electrical Business Equipment
Specifications
All specifications for opto­couplers remain unchanged
when this option is ordered. The 5000 V rms/1 Minute
capability is validated by a factory 6200 VAC/1 Second
dielectric voltage withstand test.
This option is currently avail­able on the following plastic
optocouplers.
6N135/6
6N137
6N138/9
Ordering Information
ACPL-772L
To obtain this high voltage cap­ability on plastic opto­
couplers order the standard part number and Option
020.
ACPL-K453, ACPL-P454, ACPL-W454
Examples:
HCPL-260L/3L
ACPL-P611, ACPL-W611
HCPL-2601/11
6N135#020
HCPL-261A/N
HCPL-7710#020
HCPL-270L/3L
This option may also be com­bined with option #300
(gullwing surface mount) or #500 (gullwing in tape &
reel).
To obtain these combinations order option #320 or #520
respectively.
Examples:
6N135#320 (gullwing surface mount and 5000 VAC/1
min)
HCPL-2601#520 (gullwing surface mount and 5000
VAC/1 min) in tape & reel
HCPL-2502/3
HCPL-2530/1/3
HCPL-2630/1, HCPL-263A/N, HCPL-4661
HCPL-2730/1
HCPL-4731
HCPL-4562
HCPL-4502/3/4/6, HCPL-4534
HCPL-4701
HCPL-7710/20/21/23
Contact your local Avago Sales Representative concern­
ing availability of this option for optocouplers not listed.
For product information and a complete list of distributors, please go to our web site:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes 5965-2746E
AV02-0618EN - July 24, 2007
Similar pages