HS-117RH ® Data Sheet October 2003 Radiation Hardened Adjustable Positive Voltage Regulator Features • Electrically Screened to DSSC SMD # 5962-99547 The Radiation Hardened HS-117RH is an adjustable positive voltage linear regulator capable of operating with input voltages up to 40VDC. The output voltage is adjustable from 1.2V to 37V with two external resistors. The device is capable of sourcing from 5mA to 1.25APEAK (0.5 APEAK for the TO-39 package). Protection is provided by the on-chip thermal shutdown and output current limiting circuitry. The Intersil HS-117RH has advantages over other industry standard types, in that circuitry is incorporated to minimize the effects of radiation and temperature on device stability. Constructed with the Intersil dielectrically isolated Rad Hard Silicon Gate (RSG) process, the HS-117RH is immune to single event latch-up and has been specifically designed to provide highly reliable performance in harsh radiation environments. Specifications for Rad Hard QML devices are controlled by the Defense Supply Center in Columbus (DSCC). The SMD numbers listed here must be used when ordering. Detailed electrical specifications for the HS-117RH are contained in SMD 5962-99547. A “hot-link” is provided on our website for downloading. Pinouts HS2-117RH (TO-39 CAN) BOTTOM VIEW ADJUST 2 • QML Qualified per MIL-PRF-38535 Requirements • Radiation Environment - 300 krad (Si) (Max) - Latch-up Immune • Superior Temperature Stability • Overcurrent and Overtemperature Protection Applications • Adjustable Linear Voltage Regulators • Adjustable Linear Current Regulators Ordering Information ORDERING NUMBER INTERNAL MKT. NUMBER TEMP. RANGE (oC) 5962F9954701VUC HS2-117RH-Q -55 to 125 5962F9954701QUC HS2-117RH-8 -55 to 125 5962F9954701VXC HS9S-117RH-Q -55 to 125 5962F9954701QXC HS9S-117RH-8 -55 to 125 5962F9954701VYC HSYE-117RH-Q -55 to 125 5962F9954701QYC HSYE-117RH-8 -55 to 125 HS2-117RH/Proto HS2-117RH/Proto -55 to 125 HS9S-117RH/Proto HS9S-117RH/Proto -55 to 125 HSYE-117RH/Proto HSYE-117RH/Proto -55 to 125 HSYE-117RH (SMD.5 CLCC) BOTTOM VIEW 3 OUT IN 1 FN4560.7 2 1 - ADJUST 2 - IN 3 - OUT 3 HS9S-117RH (TO-257AA FLANGE MOUNT) TOP VIEW 1 3 IN 2 OUT 1 ADJUST 1 NOTE: No current JEDEC outline for the SMD.5 package. Refer to SMD for package dimensions. The TO-257 is a totally isolated metal package. CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright © Intersil Americas Inc. 2003. All Rights Reserved. All other trademarks mentioned are the property of their respective owners. HS-117RH Die Characteristics Substrate Radiation Hardened Silicon Gate, Dielectric Isolation DIE DIMENSIONS 2616µm x 2794µm (103 mils x 110 mils) 483µm ±25.4µm (19 mils ±1 mil) Backside Finish Gold INTERFACE MATERIALS ASSEMBLY RELATED INFORMATION Glassivation Substrate Potential Type: Silox (SiO2) Thickness: 8.0kÅ ±1.0kÅ Unbiased (DI) Top Metallization ADDITIONAL INFORMATION Type: AlSiCu Thickness: 16.0kÅ ±2kÅ Worst Case Current Density <2.0 x 105 A/cm2 Transistor Count 95 Metallization Mask Layout HS-117RH VIN VIN VOUT VOUT ADJ VOUTK All Intersil U.S. products are manufactured, assembled and tested utilizing ISO9000 quality systems. Intersil Corporation’s quality certifications can be viewed at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 2